Kramer VM-4HDCPxl Manuel utilisateur

VM-4HDCPXL Quick Start

P/N:

2900- 301265QS

Rev:

Scan for full manual

VM-4HDCPXL Quick Start Guide

This guide helps you install and use your VM-4HDCPXL for the first time.

Go to www.kramerav.com/downloads/VM-4HDCPXL to download the latest user manual and check if

firmware upgrades are available.

Step 1: Check what’s in the box

VM-4HDCPXL 1:4 DVI (HDCP) Distribution Amplifier

4 Rubber feet

1 Power cord

1 Quick start guide

Step 2: Get to know your VM-4HDCPXL

Feature

Function

POWER LED

The green LED is illuminated when the unit is turned ON

EDID Buttons

READ

1. To show the EDID status, press READ

2. To acquire the EDID, press the EDID SELECT button, then press READ

SELECT

Press to select the EDID mode (One Output, Default or Auto-mix)

OUTPUT STATUS LEDs (from

1 to 4)

LEDs illuminate when an output(s) is connected and active;

LEDs flash to indicate the type of EDID acquired or when a non-HDCP display is

connected while HDCP content is provided to the VM-4HDCPxl

INPUT DVI Connector

Connects to the DVI source

OUTPUT DVI Connectors

Connects to a DVI acceptor (from 1 to 4)

FOR PROGRAMMING 9-pin D-

sub Port

For service use only

Power Connector with Fuse

AC connector enabling power supply to the unit

POWER Switch

Illuminated switch for turning the unit ON or OFF

Step 3: Mount VM-4HDCPXL

To rack mount the machine, attach both rack ears

(by removing the screws from each side of the

machine and replacing those screws through the

rack ears) or place the machine on a table.

•Ensure that the environment (e.g., maximum ambient temperature &

air flow) is compatible for the device.

•Avoid uneven mechanical loading.

•Appropriate consideration of equipment nameplate ratings should be

used for avoiding overloading of the circuits.

•Reliable earthing of rack-mounted equipment should be maintained.

Step 4: Connect inputs and outputs

Always switch OFF the power on each device before connecting it to your VM-4HDCPXL.

To achieve specified extension distances, use the recommended Kramer cables available at www.kramerav.com/product/VM-4HDCPXL.

Using third-party cables may cause damage!

Step 5: Connect power

Connect the power cord to VM-4HDCPXL and plug it into the mains electricity.

Safety Instructions (See www.kramerav.com for updated safety information)

Caution:

•For products with relay terminals and GPI\O ports, please refer to the permitted rating for an external connection, located next to the

terminal or in the User Manual.

•There are no operator serviceable parts inside the unit.

Warning:

•Use only the power cord that is supplied with the unit.

•Disconnect the power and unplug the unit from the wall before installing.

•Do not open the unit. High voltages can cause electrical shock! Servicing by qualified personnel only.

•To ensure continuous risk protection, replace fuses only according to the rating specified on the product label which located on the

bottom of the unit.

Autres manuels pour VM-4HDCPxl

Table des matières

Autres manuels Kramer Amplificateur

Kramer

Kramer 101L Manuel utilisateur

Kramer

Kramer PT-102VN Manuel utilisateur

Kramer

Kramer VM-50CA Manuel utilisateur

Kramer

Kramer PA-225NET Manuel utilisateur

Kramer

Kramer 103AV Manuel utilisateur

Kramer

Kramer VP-200XL Manuel utilisateur

Kramer

Kramer VM-20HDxl Manuel utilisateur

Kramer

Kramer VM-3S Manuel utilisateur

Kramer

Kramer VP-242 Manuel utilisateur

Kramer

Kramer VM-4HDT Manuel utilisateur

Kramer

Kramer VP-8 Manuel utilisateur

Kramer

Kramer 903 Manuel utilisateur

Kramer

Kramer PT-101R Manuel utilisateur

Kramer

Kramer 100 Manuel utilisateur

Kramer

Kramer DigiTOOLS 6505 Manuel utilisateur

Kramer

Kramer 907xl Manuel utilisateur

Kramer

Kramer PA-120Z Manuel utilisateur

Kramer

Kramer VM-5ARII Manuel utilisateur

Kramer

Kramer VM-92 Manuel utilisateur

Kramer

Kramer PT-102AN Manuel utilisateur

Kramer

Kramer 914 Manuel utilisateur

Kramer

Kramer TOOLS 900xl Manuel utilisateur

Kramer

Kramer VM-1110 Manuel utilisateur

Kramer

Kramer VM-10xl Manuel utilisateur

Manuels Amplificateur populaires d'autres marques

ASTRO

ASTRO HVO V40 P Manuel utilisateur

Marantz

Marantz SUPERSCOPE BLA-545 Instructions de montage

NAD

NAD CI980 Manuel utilisateur

Technics

Technics SE-CH770 Manuel utilisateur

Harman Kardon

Harman Kardon HK6300 Manuel utilisateur

NAD

NAD T975 Manuel utilisateur

McIntosh

McIntosh MA6850 Manuel utilisateur

Electro-Harmonix

Electro-Harmonix ENGLISH MUFF’N Manuel utilisateur

Viatron

Viatron Autrix Manuel utilisateur

GME

GME GA9800 Manuel utilisateur

Atlas

Atlas CP700 Manuel utilisateur

Roland

Roland KC-1000 Manuel utilisateur

Pyle

Pyle PFMRA350BW Manuel utilisateur

Advantage

Advantage S-250 Manuel utilisateur

IRT Electronics

IRT Electronics DVA-3007 Manuel utilisateur

Dimavery

Dimavery BA-100 Series Manuel utilisateur

Sony

Sony XM-S400D Manuel utilisateur

Schertler

Schertler ROY X Manuel utilisateur