Kramer TOOLS 900xl Manuel utilisateur

900XL Quick Start

P/N:

2900- 301281QS

Rev:

Scan for full manual

900XL Quick Start Guide

This guide helps you install and use your 900XL for the first time.

Go to www.kramerav.com/downloads/900XL to download the latest user manual and check if firmware

upgrades are available.

Step 1: Check what’s in the box

900XL Stereo Power Amplifier

4 Rubber feet

1 Bracket set

Power adapter (12V DC)

1 Quick start guide

Step 2: Get to know your 900XL

Feature

Function

12V DC Connector

+12V DC for powering the unit

RS-232 Tx Rx G Terminal Block Connector

Connect to PC

L+ L–R+ R–OUT Terminal Block Connector

Speaker output

IN 2 RIGHT RCA Connector

Connect to stereo audio right input of source 2

IN 2 LEFT RCA Connector

Connect to stereo audio left input of source 2

IN 1 3.5mm Mini-jack Connector

Connect to stereo audio input of source 1

INPUT 1 Button

Selects the input from audio source 1

INPUT 2 Button

Selects the input from audio source 2

VOLUME –Button

Decreases output volume

VOLUME + Button

Increases output volume

OVER LED

Illuminates red when device is overheating and mutes output

ON LED

Illuminates green when receiving power

Step 3: Mount 900XL

Install 900XL using one of the following methods:

•Attach the rubber feet and place the unit on a flat surface.

•Fasten a bracket (included) on each side of the unit and attach it to a flat surface

(see www.kramerav.com/downloads/900XL).

•Mount the unit in a rack using the recommended rack adapter

(see www.kramerav.com/product/900XL).

•Ensure that the environment (e.g., maximum ambient temperature &

air flow) is compatible for the device.

•Avoid uneven mechanical loading.

•Appropriate consideration of equipment nameplate ratings should be

used for avoiding overloading of the circuits.

•Reliable earthing of rack-mounted equipment should be maintained.

Step 4: Connect inputs and outputs

Always switch OFF the power on each device before connecting it to your 900XL.

To achieve specified extension distances, use the recommended Kramer cables available at www.kramerav.com/product/900XL.

Using third-party cables may cause damage!

Step 5: Connect power

Connect the power cord to 900XL and plug it into the mains electricity.

Safety Instructions (See www.kramerav.com for updated safety information)

Caution:

•For products with relay terminals and GPI\O ports, please refer to the permitted rating for an external connection, located next to the

terminal or in the User Manual.

•There are no operator serviceable parts inside the unit.

Warning:

•Use only the power cord that is supplied with the unit.

•Disconnect the power and unplug the unit from the wall before installing.

Step 6: Operate 900XL

You can operate your 900XL using:

•The front panel buttons

•RS-232 serial commands transmitted by a PC, touch screen system, or other serial controller

Using the Front Panel Buttons

To operate the 900XL using the front panel buttons:

1. Press INPUT 1 button or INPUT 2 button to select audio input source.

2. Press VOLUME + and –buttons to adjust the output volume to the speakers.

In the case of output distortion that cannot be corrected using the volume controls, try switching the LEVEL switch on the

underside of the unit from H to L and alter the output using the volume control.

Using Serial Commands

To operate 900XL using serial commands, you need to install Kramer's control software (See www.kramerav.com to Download

control software)

Autres manuels pour TOOLS 900xl

Table des matières

Autres manuels Kramer Amplificateur

Kramer

Kramer VM-100YC Manuel utilisateur

Kramer

Kramer VM-4UX Manuel utilisateur

Kramer

Kramer DigiTOOLS 6505 Manuel utilisateur

Kramer

Kramer 104LN Manuel utilisateur

Kramer

Kramer TP-102HD Manuel utilisateur

Kramer

Kramer VP-210K Manuel utilisateur

Kramer

Kramer Cobra DA9 Manuel utilisateur

Kramer

Kramer TOOLS VP-200NA Manuel utilisateur

Kramer

Kramer VP-200K Manuel utilisateur

Kramer

Kramer 903 Manuel utilisateur

Kramer

Kramer VM-10HDxl Manuel utilisateur

Kramer

Kramer TP-50 Manuel utilisateur

Kramer

Kramer VM-73 Manuel utilisateur

Kramer

Kramer VM-2DVI Manuel utilisateur

Kramer

Kramer VM-51 Manuel utilisateur

Kramer

Kramer TOOLS VP-200D Manuel utilisateur

Kramer

Kramer TP-202 Manuel utilisateur

Kramer

Kramer VM-2N Manuel utilisateur

Kramer

Kramer VP-200AK Manuel utilisateur

Kramer

Kramer 912 Manuel utilisateur

Kramer

Kramer VA-8XL Manuel utilisateur

Kramer

Kramer VM-114H2C Manuel utilisateur

Kramer

Kramer VP-2L Manuel utilisateur

Kramer

Kramer VP-200K Manuel utilisateur

Manuels Amplificateur populaires d'autres marques

ASTRO

ASTRO HVO V40 P Manuel utilisateur

Marantz

Marantz SUPERSCOPE BLA-545 Instructions de montage

NAD

NAD CI980 Manuel utilisateur

Technics

Technics SE-CH770 Manuel utilisateur

Harman Kardon

Harman Kardon HK6300 Manuel utilisateur

NAD

NAD T975 Manuel utilisateur

McIntosh

McIntosh MA6850 Manuel utilisateur

Electro-Harmonix

Electro-Harmonix ENGLISH MUFF’N Manuel utilisateur

Viatron

Viatron Autrix Manuel utilisateur

GME

GME GA9800 Manuel utilisateur

Atlas

Atlas CP700 Manuel utilisateur

Roland

Roland KC-1000 Manuel utilisateur

Pyle

Pyle PFMRA350BW Manuel utilisateur

Advantage

Advantage S-250 Manuel utilisateur

IRT Electronics

IRT Electronics DVA-3007 Manuel utilisateur

Dimavery

Dimavery BA-100 Series Manuel utilisateur

Sony

Sony XM-S400D Manuel utilisateur

Schertler

Schertler ROY X Manuel utilisateur