www.kovert.com OPTION F Doc PTZ054.doc
PTZ054 22x PTZ Module rev : 1.0
Email: support@kovert.com 2systemq.com
2. The module Menu Structure.
Once in the menu system of the camera module the following options are available.
BACKLIGHT Used to switch backlight compensation on or off. This can be
used to improve image quality when the light behind the object
causes the object to appear dark or dim.
SLOW SHT This setting allows the module to slow the shutter speed down
or to turn the slow shutter off. The range of shutter speeds
range from 2 to 128.
DAY/NIGHT This option is used to set the module to either switch
automatically between day and night mode depending upon the
level of light available. (AUTO) will stay in colour during the
day and switch to black & white at night, (OFF) will stay in
colour mode and (ON) will stay in black and white mode.
WB CONTROL This option is used to determine how the white balance is
controlled by the module. When set to AUTO the module will
automatically alter the white balance in relation to the amount
of light in the image, whereas when set to PUSH the module
will only set the white balance once when the camera has
moved into position.
SHUTTER Always set to AUTO.
CAMERA ID A numeric identifying number between 0 and 255 which is then
displayed onthe screen.
ZOOM START This option is the setting of the minimum zoom that the module
will allow x1 to x22. For example if this is set to x5 the
operator will not be able to use the x1 to x4 modes when using
the WIDE & TELE buttons.
MENU OF CAM
1. BACKLIGHT (OFF,ON)
2. SLOW SHUTTER (OFF or 2 to 128)
3. DAY/NIGHT (OFF,ON,AUTO)
4. WB CONTROL (PUSH,AUTO)
5. SHUTTER (AUTO)
6. CAMERA ID (NUMERIC 3 DIGIT 000 to 255)
7. ZOOM START (x001 to x022)
8. ZOOM STOP (x001 to x220)
9. BRIGHTNESS (1 to 48)
10. SHARPNESS (0 to 18)
11. FOCUS (PUSH or AUTO)
12. INIT SET (OFF or ON)
