Kontron ThinkIO-P Manuel utilisateur
™
P R E L I M I N A R Y
29867.06_01.VC.070319/151228
ThinkIO™ - P
Premium DIN Rail PC
for Fieldbus and IO Systems
Manual ID: 29867.06, Rev. Index 01
19 March, 2007
The product described in this manual is
in compliance with all applied CE stan-
dards.
PROGRAMMING ASSISTANCE GUIDE
-
CoDeSys PLC
CoDeSys PLC PROGRAMMING ASSISTANCE GUIDE ThinkIO™ - P
© 2007 Kontron Modular Computers GmbH ID 29867.06, Rev. 01
P R E L I M I N A R Y
29867.06_01.VC.070319/151228
Page ii
Revision History
Imprint
Kontron Modular Computers GmbH may be contacted via the following:
MAILING ADDRESS TELEPHONE AND E-MAIL
Kontron Modular Computers GmbH +49 (0) 800-SALESKONTRON
D - 87600 Kaufbeuren Germany
For further information about other Kontron Modular Computers products, please visit our In-
ternet web site: www.kontron.com
Publication Title: ThinkIO™ - P: Programming Assistance Guide - CoDeSys PLC
ID Number: 29867.06
Rev.
Index Brief Description of Changes Date of Issue
01 Initial issue 19 Mar, 2007
ThinkIO™ - P PROGRAMMING ASSISTANCE GUIDE CoDeSys PLC
P R E L I M I N A R Y
29867.06_01.VC.070319/151229
ID 29867.06, Rev. 01 © 2007 Kontron Modular Computers GmbH Page iii
Table of Contents
1. Copyright .............................................................................................................. 1
2. First Steps with CoDeSys on ThinkIO-P ............................................................... 1
3. Virtual Console ..................................................................................................... 2
4. Ethernet Network Configuration ............................................................................ 2
4.1 Interfacing .................................................................................................... 2
4.2 Providing a Route Between the Windows Host PC and the ThinkIO-P ........ 3
5. CoDeSys Installation and Settings ....................................................................... 4
5.1 Installation of CoDeSys IDE on a Host PC (Windows) ................................. 4
5.2 Installing the CoDeSys Target Support Package (TSP) ............................... 9
6. Working with the CoDeSys IDE .......................................................................... 12
6.1 Creating a New Project .............................................................................. 13
6.2 PLC Configuration (I/O) .............................................................................. 16
6.2.1 Configuring K-Bus I/O Modules ......................................................... 16
6.2.2 Configuring a Fieldbus ....................................................................... 22
6.3 Writing a Test Application ........................................................................... 25
6.4 Creating a Visualization .............................................................................. 26
6.5 Compiling the Project ................................................................................. 26
6.6 Setting Up the Gateway Server for Communication .................................. 27
6.7 Download the Program .............................................................................. 29
6.8 Start the Program ....................................................................................... 30
7. Transfering an Application to the ThinkIO-P ....................................................... 30
CoDeSys PLC PROGRAMMING ASSISTANCE GUIDE ThinkIO™ - P
P R E L I M I N A R Y
29867.06_01.VC.070319/151229
© 2005 Kontron Modular Computers GmbH ID 29867.03, Rev. 01Page iv
This page has been intentionally left blank.
ID 29867.06, Rev. 01 © 2007 Kontron Modular Computers GmbH
P R E L I M I N A R Y
29867.06_01.VC.070319/151229
Page 1
ThinkIO™ - P PROGRAMMING ASSISTANCE GUIDE CoDeSys PLC
1. Copyright
Copyright © 2007 Kontron Modular Computers.
Kontron Modular Computers makes no representations or warranties with respect to the con-
tents or use of this manual, and specifically disclaims any express or implied warranties of mer-
chantability or fitness for any particular purpose.
KontronModularComputersmakesnorepresentationsorwarrantieswithrespecttothisCoDeSys
PLC package, and specifically disclaims any express or implied warranties of merchantability
or fitness for any particular purpose.
Permission is granted to make and distribute verbatim copies of this manual provided that the
copyright notice and this permission notice are preserved on all copies.
Permission is granted to copy and distribute modified versions of this documentation under the
conditions for verbatim copying, provided also that the entire resulting derived work is distrib-
uted under the terms of a permission notice identical to this one.
Permission is granted to copy and distribute translations of this documentation into another lan-
guage, under the above conditions for modified versions.
Trademarks, registered trademarks, and trade names are the property of their respective own-
ers.
2. First Steps with CoDeSys on ThinkIO-P
This document provides basic information as well as step by step procedures for creating a new
CoDeSys target, setting up the target settings, compiling, downloading, and starting a CoDeSys
program within the CoDeSys workbench (IDE). For further details refer to the CoDeSys docu-
mentation.
The following hardware, software, and documentation are required in order to perform the pro-
cedures provided in this document:
• a Host PC with either Windows XP or Windows 2000 operating system
• a ThinkIO-P configured with appropriate WAGO IO modules and a PROFIBUS fieldbus
interface
• a network connection between the Host PC and the ThinkIO-P
(1-to-1 patch cable or a crossed Ethernet cable)
• a DVD from Kontron containing the CoDeSys IDE and CoDeSys ThinkIO-P target files
• a USB keyboard for the ThinkIO-P
• a monitor (TFT or CRT) and either a DVI cable or a cable adapter DVI to VGA and a VGA
cable for the ThinkIO-P
• CoDeSys manuals
P R E L I M I N A R Y
29867.06_01.VC.070319/151229
© 2007 Kontron Modular Computers GmbH ID 29867.06, Rev. 01Page 2
CoDeSys PLC PROGRAMMING ASSISTANCE GUIDE ThinkIO™ - P
3. Virtual Console
ThinkIO-P (for CoDeSys with Target Visualization) supports two consoles:
• Console 1: login text console (operating system command line)
• Console 2: graphic console (used for CoDeSys Target Visualization)
The default resolution of the graphic console is 640 x 480 pixels, 16-bit color depth. To switch
between the consoles, use the keys <ALT><F1> and <ALT><F2>. The resolution can be
changed with the "vgaconfig" tool or the resolution can also be changed via Web Based Man-
agement. The settings for graphic console must corrrespond to those supported by the monitor
display in use.
4. Ethernet Network Configuration
4.1 Interfacing
The ThinkIO-P ports X8 and X9 provide interfacing for an Ethernet network. The port X8 is con-
figured for BootP and the port X9 is configured with the IP address of 192.168.0.50 at the fac-
tory.
Use of the Ethernet interface requires that the IP addresses of the local host PC and the
ThinkIO-P be known, and the IP address of the gateway if the ThinkIO-P and the local host PC
are in different networks. If requred, consult the system administrator for this information.
The following figures illustrate the basic types of network connections that are possible with the
ThinkIO-P.
Simple ThinkIO-P to Local Host PC (development system) Configuration
The addresses indicated in these figures are for illustration purposes only and do not neces-
sarily represent the actual development situation.
LOCAL HOST PC
THINKIO-P IP Address X9: 192.168.0.50 (factory setting)
Sub-netmask: 255.255.255.0
ID 29867.06, Rev. 01 © 2007 Kontron Modular Computers GmbH
P R E L I M I N A R Y
29867.06_01.VC.070319/151229
Page 3
ThinkIO™ - P PROGRAMMING ASSISTANCE GUIDE CoDeSys PLC
Standard Network Configuration
If the IP address of the ThinkIO-P is known and it is required to change the address, the
ThinkIO-P maybe accessed via Web Based Management. In any event, the IP address of the
ThinkIO-P is required to download a CoDeSys application.
4.2 Providing a Route Between the Windows Host PC and the
ThinkIO-P
If the host PC and the ThinkIO-P reside in two different networks, a logical route between the
networks must be established. This is accomplished using the DOS line command "route" on
the Windows host PC.
In the following example, 192.168.52.220 is the IP address of the ThinkIO-P, and the address
of the gateway for this network is 193.102.136.40. The command is as follows:
route ADD 192.168.52.220 MASK 255.255.255.0 193.102.136.40
target sub-netmask gateway
To verify the communication path, issue a "ping" command.
LOCAL HOST PC
GATEWAY
IP Address: 192.168.1.1 (for example)
Sub-netmask: 255.255.255.0
IP Address: nnn.nnn.nnn.nnn
THINKIO-P IP Address X9: 192.168.0.50 (factory setting)
Sub-netmask: 255.255.255.0
SWITCH/HUB
Note: The gateway may or may not be
present in this configuration.
P R E L I M I N A R Y
29867.06_01.VC.070319/151229
© 2007 Kontron Modular Computers GmbH ID 29867.06, Rev. 01Page 4
CoDeSys PLC PROGRAMMING ASSISTANCE GUIDE ThinkIO™ - P
5. CoDeSys Installation and Settings
5.1 Installation of CoDeSys IDE on a Host PC (Windows)
Perform the following procedures to install the CoDeSys IDE on an Windows application devel-
opment system.
PROCEDURE START: Installation of CoDeSys
1. Insert the DVD which contains CoDeSys IDE
2. Run the "setup.exe" in the CoDeSys directory
3. Choose a language and then click OK
4. If requested by the InstallShield Wizard, close all running applications, and then click OK
5. To continue, click Next
ID 29867.06, Rev. 01 © 2007 Kontron Modular Computers GmbH
P R E L I M I N A R Y
29867.06_01.VC.070319/151230
Page 5
ThinkIO™ - P PROGRAMMING ASSISTANCE GUIDE CoDeSys PLC
6. Select the installation destination folder
• to select the default folder, click Next
• to select a different folder, click Browse and select an appropriate folder or create a
new folder, and then click Next
7. Select CoDeSys components
• to select components, set or delete selections as required
• to continue, click Next
The selection indicated below is minimal but sufficient for an installation.
P R E L I M I N A R Y
29867.06_01.VC.070319/151231
© 2007 Kontron Modular Computers GmbH ID 29867.06, Rev. 01Page 6
CoDeSys PLC PROGRAMMING ASSISTANCE GUIDE ThinkIO™ - P
8. To accept the proposed program folder click Next
9. Examine the Configuration Overview
• if satisfactory, click Next to continue
• to revise, click Back and modify as required
Autres manuels pour ThinkIO-P
1
Table des matières
Autres manuels Kontron Matériel informatique
Kontron
Kontron COMe-bP5020 Manuel utilisateur
Kontron
Kontron KTQ67/Flex Manuel utilisateur
Kontron
Kontron DIMM-PC/MD Manuel utilisateur
Kontron
Kontron AT8901 Manuel utilisateur
Kontron
Kontron MPC-pONE Manuel utilisateur
Kontron
Kontron CP3005-SA Manuel utilisateur
Kontron
Kontron Kiss 2U Manuel utilisateur
Kontron
Kontron AT8902M Manuel utilisateur
Kontron
Kontron COMe Eval Carrier T7 Manuel utilisateur
Kontron
Kontron CP6007-SA Manuel utilisateur
Kontron
Kontron COM Express Eval 10 Manuel utilisateur
Kontron
Kontron SMARC-sAMX8 Manuel utilisateur
Kontron
Kontron SDML-WLU0 Series Manuel utilisateur
Kontron
Kontron MOPSlcdLX Manuel utilisateur
Kontron
Kontron COMe-cBTi6R E3845 8GB/16S Manuel utilisateur
Kontron
Kontron 11529 Manuel utilisateur
Kontron
Kontron COM-HPC Manuel utilisateur
Kontron
Kontron xBP-6E2P3 Manuel utilisateur
Kontron
Kontron CP6003-SA Manuel utilisateur
Kontron
Kontron X-Board UPA 63036 Manuel utilisateur
Manuels Matériel informatique populaires d'autres marques
EMC2
EMC2 VNX Series Manuel du propriétaire
Panasonic
Panasonic DV0PM20105 Manuel utilisateur
Mitsubishi Electric
Mitsubishi Electric Q81BD-J61BT11 Manuel utilisateur
Gigabyte
Gigabyte B660M DS3H AX DDR4 Manuel utilisateur
Raidon
Raidon iT2300 Manuel utilisateur
National Instruments
National Instruments PXI-8186 Manuel utilisateur
