Konica Minolta CM-26dG Caractéristiques techniques

Spectrophotometer

CM-26dG

CM-26d

CM-25d

En Basic Operating

Instructions

Please read before using the instrument.

This manual explains the basic procedures for measuring

color and/or gloss with the CM-26dG / 26d / 25d

spectrophotometers.

Note) For setting and operation details, see the instruction

manual of the CM-26dG / 26d / 25d.

Table of Contents

Names of Parts ..................................................... 1

Measurement ....................................................... 5

When color difference is measured ....................... 9

Setting measurement conditions ........................ 16

How to set the measuring instrument ................. 17

Names of Parts

■Instrument

Viewfinder lever

Measurement button

(It is on the left and right)

Measurement

area switch

Sample

surface

aperture

Screw holes for securing

Battery

cover

Viewfinder

(Specimen

confirmation

window) LCD screen

Control panel

Charging lamp

Power switch

(CM-26dG/26d only)

USB connection

terminal

(Mini-B type)

Wrist strap

attachment hole

Viewfinder

■Display (LCD Screen)

P.22, Instruction Manual

Names of Parts

Status bar

Data number and

name

Target reference (sample) /

Affiliated group (target)

Target/Sample

Measurement

date/time

Observer/

Illuminant 1

Measurement

area

UV setting

Observer/

Illuminant 2

Pass/fail

result

Target to be used for association

with the next measurement or

filter (target)

■Operation Keys

［］

(Target/Sample) key

Switches between <Target> screen

and <Sample> screen.

[MENU] key

Displays the

<Settings> screen.

[ESC] key

Returns to the previous

screen without configuring

the settings when pressed

on the <Settings> screen,

and returns to list screen

when pressed on the sample

details screen.

[◀, ▶, ▲, ▼] keys

Switches screen tabs from the

<Results Display> screen,

moves the cursor on the

<Settings> screen, or changes

the selected value.

[Confirmation] key

Sets the item or

setting indicated

by the cursor on

the various setting

screens. This key

also switches to

detail screens for

data selected in the

list displayed on the

screen.

■Calibration

Stage

Cap

Zero calibration hole

White calibration plate

Gloss calibration plate

CM-26dG

Cap

Zero calibration hole

White calibration plate

Target mask holder

CM-26d

Cap

Zero calibration hole

White calibration plate

CM-25d

1Turning the Power ON (P.6)

Language selection

P.103, Instruction Manual

* As necessary (after initialization, etc.)

Measurement cond. setting

P.92, Instruction Manual

Measurement area selection

P.33, Instruction Manual

* When required depending on the

measurement conditions

Note: Make sure the measurement area set on the instrument

is the same as the area of the target mask to be used.

Zero calibration

P.35, Instruction Manual

* Only when required (when changing

the measurement conditions, etc.)

2White calibration (P.6, P.7)

White calibration

Gloss calibration (* CM-26dG only)

3Measurement (P.8)

Measurement

Turning the

Power ON

P.32,

Instruction Manual

White

calibration

P. 37,

Instruction Manual

①

Press and hold the power switch for about 1 second.

∙ When first turning the instrument ON after purchasing,

the language setting screen will be displayed, followed

by the date and time setting screen. Configure the

settings according to P.103 and P.104.

To perform white calibration

Note:

Zero calibration must be performed before white calibration

if there have been significant changes in the measurement

environment, if the instrument has not been used for a long

period of time or if using the MAV target mask (with glass).

①

Select “Calibration (Excluding

Zero Cal.)” and press the

[Confirmation] key.

②Place the instrument on

the calibration stage.

③

Press the measurement button.

∙ White calibration will be performed.

∙ Do not move the instrument until white

calibration is complete.

Place the

instrument

on the

calibration

stage

according to

the marks.

Calibration stage

Measurement

Gloss

calibration

only with the 26dG

P.38,

Instruction Manual

If using the CM-26dG, perform

gloss calibration next.

④Place the instrument

in the gloss calibration

position.

Place the

instrument

on the

calibration

stage

according to

the marks.

Calibration stage

⑤Press the

measurement button.

∙ Gloss calibration will

be performed.

∙ Do not move the

instrument until gloss

calibration is complete.

∙ When gloss calibration is

completed, the screen returns

to the <Sample> screen.

Measurement

P.41,

Instruction Manual

①Check the Sample

screen.

・

If not displayed, switch to the

Sample screen.

②Set the specimen

measuring port on the

sample to measure.

∙ Take care to prevent floating

or tilting from occurring.

③Press the

measurement button.

∙ The results are displayed on

the screen. The sample was

saved as "0001".

Measurement

<Reference

color screen>

<measurement

screen>

Autres manuels pour CM-26dG

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Konica Minolta Instrument de mesure

Konica Minolta

Konica Minolta CR-20 Manuel utilisateur

Konica Minolta

Konica Minolta RANGE 5 Manuel utilisateur

Konica Minolta

Konica Minolta CA-410 Series Manuel utilisateur

Konica Minolta

Konica Minolta CA-310 Manuel utilisateur

Konica Minolta

Konica Minolta CM-2600d Manuel utilisateur

Konica Minolta

Konica Minolta CM-36dGV Manuel utilisateur

Konica Minolta

Konica Minolta FD-5 Manuel utilisateur

Konica Minolta

Konica Minolta Vivid 910 Manuel utilisateur

Konica Minolta

Konica Minolta CM-3700A Manuel utilisateur

Konica Minolta

Konica Minolta CA-210 Manuel utilisateur

Konica Minolta

Konica Minolta CL-200A Manuel utilisateur

Konica Minolta

Konica Minolta CM-3630A Manuel utilisateur

Konica Minolta

Konica Minolta CM3610D Manuel utilisateur

Konica Minolta

Konica Minolta CM-600d Manuel utilisateur

Konica Minolta

Konica Minolta CM-25cG Manuel utilisateur

Konica Minolta

Konica Minolta REGIUS 110 Manuel utilisateur

Konica Minolta

Konica Minolta REGIUS 210 Manuel utilisateur

Konica Minolta

Konica Minolta CS-2000 Manuel utilisateur

Konica Minolta

Konica Minolta CM-2500D Manuel utilisateur

Konica Minolta

Konica Minolta CM-2600d Manuel utilisateur

Konica Minolta

Konica Minolta CM-3220D Manuel utilisateur

Konica Minolta

Konica Minolta CM-M6 Manuel utilisateur

Konica Minolta

Konica Minolta RANGE7 Manuel utilisateur

Konica Minolta

Konica Minolta CHROMA METER CS-200 Manuel utilisateur

Manuels Instrument de mesure populaires d'autres marques

Suaoki

Suaoki D40 Manuel utilisateur

Elster

Elster BK-G1.6 Manuel utilisateur

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manuel

Duratool

Duratool D03128 Manuel utilisateur

Vega

Vega VEGAPULS 65 Manuel utilisateur

Tonghui

Tonghui TH2618B Manuel utilisateur

Tenmars

Tenmars TM-801 Manuel utilisateur

MSR

MSR 145 Manuel utilisateur

TPS

TPS WP-82 Manuel utilisateur

ELMETRON

ELMETRON CP-511 Manuel utilisateur

PCB Piezotronics

PCB Piezotronics 003C30 Manuel utilisateur

Tenma

Tenma 72-10465 Manuel utilisateur

Endress+Hauser

Endress+Hauser Proline Promag 50 Caractéristiques techniques

Siemens

Siemens SITRANS F Coriolis FCT030 Manuel de la liste des pièces

KLINGER

KLINGER CMF V Series Manuel utilisateur

EXFO

EXFO FTB-2 Manuel d'exploitation et d'entretien

Keysight

Keysight M8290A Manuel utilisateur

ADTEK

ADTEK MW-5 Manuel utilisateur