KOBE IS2436GSF-1 Guide de dépannage

KOBE Brand Range Hoods

Model No. / Nos de modèles / Modelo No.

IS2436GSF-1

IS2442GSF-1

IS-124 SERIES –5” HEIGHT

“ISLAND GLASS CANOPY WITH LCD SCREEN”

INSTALLATION INSTRUCTIONS

AND OPERATION MANUAL

MANUEL D'INSTALLATION

ET MODE D'EMPLOI

INSTRUCCIONES DE INSTALACIÓN

Y MANUAL DE OPERACIÓN

[ENGLISH]...................................................................................................................2

[FRENCH]..................................................................................................................27

[SPANISH].................................................................................................................50

READ BEFORE INSTALLATION

1. Carefully check all contents of packages;

2. Thoroughly inspect the unit for any cosmetic damages or

defects;

3. Test the unit before installation;

4. Have a certified contractor/electrician do the installation.

IF THERE IS ANY PROBLEM:

1. DO NOT INSTALL THE UNIT AND KEEP ALL ORIGINAL

PACKAGING MATERIAL.

2. Have your original proof of purchase and product serial number

ready.

3. Call 1-877-BUY-KOBE (289-5623); or e-mail to

[email protected] to report the problem.

NO RETURN, NO REFUND, NO EXCHANGE IF:

1. PRODUCT HAS BEEN INSTALLED

2. KNOCK-OUT HOLES HAVE BEEN PUNCTURED

3. MISSING ORIGINAL PACKAGING MATERIAL AND/OR

PARTS

IMPORTANT

READ THIS

FIRST

[ENGLISH]

- READ AND SAVE THESE INSTRUCTIONS -

CONTENTS

IMPORTANT SAFETY INSTRUCTIONS .....................................................................3

COMPONENTS OF PACKAGE...................................................................................5

INSTALLATION............................................................................................................6

OPERATION INSTRUCTIONS..................................................................................10

MAINTENANCE.........................................................................................................13

SPECIFICATIONS.....................................................................................................15

MEASUREMENTS & DIAGRAMS.............................................................................16

PARTS LIST...............................................................................................................18

CIRCUIT DIAGRAM...................................................................................................20

TROUBLE SHOOTING..............................................................................................21

WARRANTY ..............................................................................................................22

PRODUCT REGISTRATION......................................................................................24

- READ ALL INSTRUCTIONS CAREFULLY BEFORE STARTING -

ALL W IRING MUS T BE D ONE BY A PROFESSIONAL AND IN

ACCORDA NCE W ITH NAT I O NAL AND LOCAL ELECT RICA L CODES

IMPORTANT SAFETY INSTRUCTIONS

- PLEASE READ THIS SECTION CAREFULLY BEFORE INSTALLATION -

WARNING: TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR PERSONAL

INJURY, OBSERVE THE FOLLOWING:

1) Installation and electrical wiring must be done by qualified professionals and in accordance with all

applicable codes and standards, including fire-rated construction.

2) When cutting or drilling into wall or ceiling, be careful not to damage electrical wiring or other hidden

utilities.

3) Ducted fans must be vented to the outside.

a) Before servicing or cleaning unit, open the light panel and SWITCH POWER OFF AT SERVICE

PANEL.

b) Clean all grease laden surfaces frequently. To reduce the risk of fire and to disperse air

properly, make sure to vent air outside. DO NOT vent exhaust air into wall spaces, attics, crawl

spaces or garages.

NOTE

This warranty is invalid without an authorized agent’s receipt or if unit is

damaged due to misuse, poor installation, improper use, mistreatment,

negligence or any other circumstances beyond the control of KOBE

RANGE HOODS authorized agents. Any repair carried out without the

supervision of KOBE RANGE HOODS authorized agents will

automatically void the warranty.

KOBE RANGE HOODS will not be held responsible for any damages to

personal property or real estate or any bodily injuries whether caused

directly or indirectly by the range hood.

WARNING: TO REDUCE THE RISK OF PERSONAL INJURY IN THE EVENT OF A

RANGE TOP GREASE FIRE:

- Keep all fan, baffle/spacer/filter/oil tunnel/oil container and grease-laden surfaces clean. Grease

should not be allowed to accumulate on fan, baffle/spacer/filter/oil tunnel/oil container.

- Always turn hood ON when cooking.

- Use high settings on cooking range ONLY when necessary.

- Do not leave cooking range unattended when cooking.

- Always use cookware and utensils appropriate for the type and amount of food prepared.

- Use this unit only in the manner intended by the manufacturer.

- Before servicing, switch power off at service panel and lock service panel (if possible) to prevent

power from switching on accidentally.

- Clean ventilating fan frequently.

What to Do In The Event Of a Range Top Grease Fire

•SMOTHER FLAMES with a tight fitting lid, cookie sheet, or metal tray, and then turn off the burner.

KEEP FLAMMABLE OR COMBUSTIBLE MATERIAL AWAY FROM FLAMES. If the flames do not

go out immediately, EVACUATE THE AREAAND CALL THE FIRE DEPARTMENT or 911.

•NEVER PICK UP A BURNING PAN –You May Get Burned.

•DO NOT USE WATER, including wet dishcloths or towels –a violent steam blast will result.

•Use an extinguisher ONLY if:

a) You have a Class A, B, C extinguisher and know how to operate it.

b) The fire is small and contained in the area where it started.

c) The fire department has been called.

d) You can fight the fire with your back to an exit.

What to Do If You Smell Gas

- Extinguish any open flame.

- Do not try to turn on the lights or any type of appliance.

- Open all doors and windows to disperse the gas. If you still smell gas, call the Gas Company and

Fire Department right away.

CAUTION

1) For general ventilation use only. Do not use to exhaust hazardous or explosive materials and

vapors.

2) To reduce the risk of fire, use only metal ductwork. Sufficient air is needed for proper combustion

and exhausting of gases through the flue (chimney) to prevent back drafting.

3) Follow the heating equipment manufacturer’s guideline and safety standards such as those

published by the National Fire Protection Association (NFPA), and the American Society for

Heating, Refrigeration and Air Conditioning Engineers (ASHRAE), and code authorities.

4) Activating any switch on may cause ignition or an explosion.

5) Due to the size and weight of this hood, a two person installation is recommended.

ELECTRICAL SHOCK HAZARD –Can result in serious injury or

death. Disconnect appliance from electric power before servicing.

If equipped, the fluorescent light bulb contains small amounts of

mercury, which must be recycled or disposed of according to

Local, State, and Federal Codes.

COMPONENTS OF PACKAGE

(Must keep all material for returns or refunds)

MODEL NO. IS2436GSF-1

MODEL NO. IS2442GSF-1

KOBE Range Hoods –1

Instructions Manual –1

Warranty Card –1

Aluminum Mesh Filter –2







Telescopic Stack –1

Inner Duct Cover –1

Outer Duct Cover –1

Mounting Template –1

Exhaust Plate w/ screw package –1









OPTIONAL RECIRCULATING KIT AVAILABLE. FOR MORE INFORMATION, PLEASE VISIT OUR

WEBSITE WWW.KOBERangeHoods.com OR CONTACT KOBE RANGE HOODS AT (626) 775-8880.

INSTALLATION

PLEASE READ ENTIRE INSTRUCTIONS BEFORE PROCEEDING

Calculation before Installation

To calculate installation, please refer to TABLE 1. (All calculations are in inches.)

TABLE 1

A = Height of Floor to Ceiling

B = Height of Floor to Counter Top

(Standard: 36”)

C = Preferred Height of Counter Top to Hood

Bottom (Recommended 30” to 36”)

D = Height of Hood

E = Height of the Hood Installation

[A –(B+C)]

F = Height of Duct Cover

[E –D]

SAFETY WARNING

HOOD MAY HAVE VERY SHARP EDGES; PLEASE WEAR PROTECTIVE GLOVES IF

REMOVING ANY PARTS FOR INSTALLING, CLEANING OR SERVICING.

NOTE: BE CAREFUL WHEN USING ELECTRICAL SCREWDRIVER, DAMAGE TO THE HOOD

MAY OCCUR.

Preparation before Installation

NOTE: TO AVOID DAMAGE TO YOUR HOOD,

PREVENT DEBRIS FROM ENTERING

THE VENT OPENING.

Decide the location of the venting pipe

from the hood to the outside (Figure 1).

A straight, short vent run will allow the hood

to perform more efficiently.

Try to avoid as many transitions, elbows,

and long runs as possible. Transitions,

elbows and/or long runs may reduce the

performance of the hood.

Temporarily wire the hood to test for proper

operation before installing.

Important: Peel protective film off the

hood and duct covers, if any.

Use duct tape to seal the joints between

pipe sections.

Advance Planning

1. Mark centerlines of cook top or range on

ceiling. Use centerlines marked on ceiling

to position the mounting template as shown

in Figure 2.

2. Remove and save template. Cut and

remove ceiling drywall. Install 2” x 4” cross

framing lumber (not provided) between

ceiling joists.

3. The framing should be spaced 13-1/2” at

the front centerline and 11-1/8” on the sides.

Refer to Figure 3.

4. Finish the ceiling surface. Be sure to mark

the location of the ceiling joists and cross

framing lumber.

5. Align the mounting template to the ceiling

marks and tape in place with consideration

to ceiling joists and cross framing lumber

locations. Cut a 8-1/4” duct opening and

approximately a 1” wire access hole. Pre-

drill holes for the 4 mounting screws as

indicated on the template.

Figure 1

Figure 2

Figure 3

6. Align the telescopic stack to the pre-drill

holes on the ceiling and fasten to the ceiling

with four mounting screws (not provided).

Make sure screws are driven into the ceiling

at the middle of joists and cross framing

lumber for maximum support and stability.

7. Adjust the telescopic stack using reference

F in Table 1 and measurement on Page 15.

Tighten from the side with 8 screws

(provided) as shown in Figure 4.

8. Slide the duct covers up the telescopic

stack, and temporary hold the duct covers

up.

9. Install the exhaust plate using 4 screws.

10. Align the hood with the telescopic stack and

lock the unit in place. Refer to Figure 5.

SAFETY WARNING

RISK OF ELECTRICAL SHOCK. THIS

RANGE HOOD MUST BE PROPERLY

GROUNDED. MAKE SURE THIS IS DONE

BY A QUALIFIED ELECTRICIAN IN

ACCORDANCE WITH ALL APPLICABLE

NATIONAL AND LOCAL ELECTRICAL

CODES. BEFORE CONNECTING WIRES,

SWITCH POWER OFF AT SERVICE PANEL

AND LOCK SERVICE PANEL TO PREVENT

POWER FROM BEING SWITCHED ON

ACCIDENTALLY.

11. Route house wiring into the ceiling as close

to the installation location as possible.

Allow additional length of wiring to drop

down from the ceiling to the electric box.

12. Connect the electrical wires according to

color (green to green, white to white, and

black to black) and cap with wire

connectors. Green wire must be grounded

to reduce risk of electric shock.

Figure 4

Figure 5

Telescopic Stack Installation

Hood Installation

Wiring to Power Supply

Ce manuel convient aux modèles suivants

Table des matières

Langues :

Autres manuels KOBE hotte de ventilation

KOBE

KOBE RA9430SQB-1 Manuel d'utilisation et d'entretien

KOBE

KOBE RA-094 Guide de dépannage

KOBE

KOBE RA3830SQB-1 Guide de dépannage

KOBE

KOBE CH8136SQB Guide de dépannage

KOBE

KOBE PREMIUM IN2630SQB-700 Guide de dépannage

KOBE

KOBE BRILLIA SERIES INX-026OVS-INX2630SQB-600-40 Guide de dépannage

KOBE

KOBE IS2336SQ Guide de dépannage

KOBE

KOBE CHX91 SQB-1 Manuel utilisateur

KOBE

KOBE IN2630SQB-700-1 Guide de dépannage

KOBE

KOBE CH2230SQ Guide de dépannage

KOBE

KOBE CH7930SQ Guide de dépannage

KOBE

KOBE IN26 30SQB-650-5 Series Guide de dépannage

KOBE

KOBE CHX81 SQB-1 Manuel utilisateur

KOBE

KOBE INX2930SQBF-500-1 Guide de dépannage

KOBE

KOBE RA9436SQF Guide de dépannage

KOBE

KOBE IN2642SQB-1200-1 Guide de dépannage

KOBE

KOBE RA9230SQB-1 Guide de dépannage

KOBE

KOBE CH2730SQ3 Series Guide de dépannage

KOBE

KOBE IS2036GS Guide de dépannage

KOBE

KOBE INX2730SQB-700-1Brillia Series Guide de dépannage

KOBE

KOBE CH-178 Guide de dépannage

KOBE

KOBE CH8036SQ Guide de dépannage

KOBE

KOBE IN2630SQB-700-2 Guide de dépannage

KOBE

KOBE CH0036SQB-1 Guide de dépannage

Manuels hotte de ventilation populaires d'autres marques

emmeti

emmeti RECUPA MED A-140 Mode d’emploi

Nibe

Nibe F135 Manuel utilisateur

Kuppersberg

Kuppersberg INTRO 60 Instructions d'installation et d'entretien

Zephyr

Zephyr Spruce AK9834BS Guide d'installation

Hisense

Hisense MH6INBG Manuel utilisateur

Miele

Miele DA 1255 Manuel utilisateur

Broan

Broan 46000 Manuel utilisateur

GE Profile PV977 Instructions originales

FALMEC

FALMEC FFRIA24W5FS Manuel utilisateur

Whirlpool

Whirlpool RH2600XL-1 SERIES Manuel utilisateur

Küppersbusch

Küppersbusch DX ISLA Manuel utilisateur

ETNA

ETNA AV360RVS Manuel utilisateur

JUNO

JUNO JDF603E6 Manuel utilisateur

Miele

Miele DA 6708 D Manuel utilisateur

Tricity Bendix

Tricity Bendix LE 150 Manuel

AEG

AEG X68163BV1 Manuel utilisateur

AEG

AEG 125 D Manuel utilisateur

Smeg

Smeg KSEV97X Manuel utilisateur