KoamTac KBLED50 Manuel utilisateur
Up to 2.0Mbps
OS: Windows 7/8/10/11
Windows 7/8/10/11
Bluetooth Low Energy 5.0
KBLED50 USB BLE Dongle
KBLED50
KBLED50 USB BLE Dongle
- Part No: 829535
Scan the “Connect” barcode included in this package
using a KDC and the KBLED50 will be connected to
the KDC automatically.
Insert KBLED50 USB BLE Dongle into your PC USB port.
Attach “Connect” barcode sticker to PC next to
KBLED50.
Scan the “USB Dongle HID” barcode to switch
KBLED50 back to “HID Mode” from “Serial Mode.”
KBLED50 will be configured as a COM port in “Serial
Mode” which can be verified from Device Manager.
Windows will automatically install “HID Keyboard
Device” which can be verified from Device Manager.
Scan the “USB Dongle Serial” barcode to switch
KBLED50 to “Serial Mode” from “HID Mode.”
USB Dongle Serial
USB Dongle HID
FCC compliance information
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES.
Operation is subject to the following two conditions: (1) This device may not cause harmful
interference, and (2) This device must accept any interference received, including interference that
may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of
the following measures:
·Reorient or relocate the receiving antenna.
·Increase the separation between the equipment and receiver.
·Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
·Consult the dealer or an experienced radio/TV technician for help.
Modifications not expressly approved by the manufacturer may void the user's authority to
operate the equipment under FCC rules.
Ce manuel convient aux modèles suivants
1
Table des matières
Autres manuels KoamTac Matériel informatique
Manuels Matériel informatique populaires d'autres marques
EMC2
EMC2 VNX Series Manuel du propriétaire
Panasonic
Panasonic DV0PM20105 Manuel utilisateur
Mitsubishi Electric
Mitsubishi Electric Q81BD-J61BT11 Manuel utilisateur
Gigabyte
Gigabyte B660M DS3H AX DDR4 Manuel utilisateur
Raidon
Raidon iT2300 Manuel utilisateur
National Instruments
National Instruments PXI-8186 Manuel utilisateur
