KMC Controls VEP–3420 Series Manuel utilisateur

Installation Guide

3/4" & 1" 3-Way Diverting Electronic Control Valves

VEP–3420, 3421 Series

NOTE: Models do not include

HMO–5026/5027 MPT unions as

shown. Order separately.

DIMENSION REFERENCE

ABCD

3/4" MPT 3 13/16" (97) 2 3/4" (70) 5 1/8" (130)

1" MPT 4 1/16" (103) 3 1/8" (79) 5 7/8" (149)

Mounting

Valves are sized to meet the system demand and may

be smaller than the supply lines.

1. Clean the lines upstream from the valve. Remove

any debris > .06" (.15 mm)

2. Install as close as possible to the coil in a vertical

position (actuator over the valve).

CAUTION: Mount valve with the actuator in the

upright position, or at most a 45° angle, to prevent

condensation collecting in the actuator housing.

3. Align system flow with arrow on valve.

4. The MPT unions are not provided and must be

ordered separately.

3/4" valves Order: Three HMO–5026s

1" valves Order: Three HMO–5027s

5. Seal valves with approved valve sealant

6. Allow a minimum clearance of 1-1/2 " (38mm)

between the top of the actuator and the nearest

obstruction. Allow sufficient side clearance for

servicing the valve.

Required Tools

• digital voltmeter

• small screwdriver

• 2 wrenches

KMC Controls

P.O. Box 497

19476 Industrial Drive

New Paris, IN 46553

U.S.A.

TEL: 574.831.5250

FAX: 574.831.5252

E-mail: [email protected]

063-019-01C

Wiring

Valves may be connected with 3/8" flexible conduit using a HMO–4530 adaptor (not included).

The VEP–3420/33421 series come with a 2 conductor, 18 AWG, heat resistant cable. The actuators are wired

for normally closed condition.

• Blue - neutral

• Brown - hot

Maintenance

No routine maintenance is required. Each component is designed for dependable, long term reliability and

performance. Careful installation will ensure long term performance. Limit field repairs to replacement of

the complete bonnet assembly or valve disc.

VEP VALVE

TOP

HMO-4530

ADAPTER FOR

3/8" FLEXIBLE

CONDUIT

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels KMC Controls Unité de contrôle

KMC Controls

KMC Controls KMD-5567 Manuel utilisateur

KMC Controls

KMC Controls VEB-4303-SDL Series Manuel utilisateur

KMC Controls

KMC Controls VEP-34190186 Manuel utilisateur

KMC Controls

KMC Controls HPO-9001 Manuel utilisateur

KMC Controls

KMC Controls VEB-53 Series Manuel utilisateur

KMC Controls

KMC Controls VEP-43 Series Manuel utilisateur

Manuels Unité de contrôle populaires d'autres marques

Festo

Festo Compact Performance CP-FB6-E Manuel de la liste des pièces

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Manuel utilisateur

JS Automation

JS Automation MPC3034A Manuel utilisateur

JAUDT

JAUDT SW GII 6406 Series Guide rapide

Spektrum

Spektrum Air Module System Manuel utilisateur

BOC Edwards

BOC Edwards Q Series Manuel utilisateur

KHADAS

KHADAS BT Magic Manuel utilisateur

Etherma

Etherma eNEXHO-IL Manuel utilisateur

PMFoundations

PMFoundations Attenuverter Manuel utilisateur

GEA

GEA VARIVENT Manuel utilisateur

Walther Systemtechnik

Walther Systemtechnik VMS-05 Manuel utilisateur

Altronix

Altronix LINQ8PD Instructions de montage

Eaton

Eaton Powerware Series Manuel utilisateur

WAGO

WAGO 750-407/040-000 Manuel utilisateur

Sony

Sony CCU-590 Manuel utilisateur

Graco

Graco 25D614 Manuel utilisateur

Task Force Tips

Task Force Tips YE-RF-900 Manuel de programmation

Shini

Shini SPV-U Series Manuel utilisateur