Klip Xtreme Tunebar Manuel utilisateur
KSB-00A
Tunebar
English
I. Introduction
Main features
II. Package content
Congratulations on the purchase of your new KlipXtreme®Tunebar soundbar
with Bluetooth®wireless technology. We invite you to visit us at
www.klipxtreme.com for support and to find out more about this audio system
and other new and exciting products.
To get the most of your new soundbar, please take a few minutes to read the
following instructions and familiarize yourself with the operation of the unit.
Before setting up the device, make sure that the following items are included in
the box:
Unpack your unit carefully. We recommend that you save the box and all original
packing materials, in case you wish to store the unit, or if you ever need to return
it for service.
• 31.5-inch, 2.0 channel soundbar with a stylish and space-saving design, which
delivers high quality audio from wired or wireless devices
• 60 watts of total output power through two potent 2-inch full range drivers
• HDMI ARC interface for immersive sound with only one connection
• Optical digital and RCA inputs with cables included
• Bluetooth®v5.0-compatible and improved for a distance of up to 33 feet
between sound source and speaker unit
• LED display to visualize the selected mode
• Desktop or wall mount design for versatile configuration
• Remote control with convenient preset EQ settings
• Soundbar (1)
• RCA to 3.5mm Aux cable (1)
• Digital optical cable (1)
• Remote control (1)
• User's guide (1)
• AAA batteries (2)
Back panel
Side panel
III. Product overview
1. Power on/source
2. Play/pause
3. Previous track/volume -
4. Next track/volume +
1. HDMI ARC input
2. USB port
3. Optical input
4. RCA input
5. Power input
Control Description
1. Power on/source Press this button to power on and press and hold to turn it
off. Press this button to select the audio source.
2. Play/pause Press this button to play or pause audio playback. It doesn’t
work in Auxiliary mode.
Press it to play the previous track.
Press and hold this button to decrease the volume level.
3. Previous track/volume –
Press once to play the next track.
Press and hold this button to increase the volume level.
4. Next track/volume +
1 432 5
1 2 3 4
Remote control
An included infrared remote control allows additional functions for greater
control over the soundbar.
Note: Install the supplied batteries in the remote control. For the remote to
operate properly, make sure it is pointed toward the front of the soundbar.
VOL+
VOL-
USB
AUX
ARC
1
2
6
6
10
11
12
14
RESET MUTE
BT OPT
3
4
5
8
9
7
13
EQ
IV. Preliminary steps
1. The soundbar can be placed on a desktop or hanged on the wall.
2. If you decide to mount the soundbar on the wall, determine the location and
mark the holes on the surface.
3. For gypsum or wooden walls, locate studs in the wall. You may use a stud
finder to determine the center of each stud.
4. Drill pilot holes and insert anchors if installing the unit on a concrete or brick
wall.
5. Drive the screws into the holes with a screwdriver, leaving some space
between the head and the wall surface.
6. Make all necessary cable connections before mounting the soundbar on the
wall (Aux. or optical input cables).
7. Once all connections have been completed, carefully slide the soundbar over
the screws you just installed.
8. By plugging the soundbar Ac cord into a wall outlet, the soundbar will be
ready to use.
V. Optical digital and Auxiliary connections
1. Insert one end of the supplied optical digital cable into the matching input jack
on the back of the soundbar and the other end on the device you wish to play
audio from.
2. Turn on the soundbar by pressing the power button located on the right-side
panel of the unit. You can also press the red power button on the remote
control.
Buttons Description
1.
2. RESET
Press it to alternate between on and standby modes.
Press it to change all settings to default mode.
3. MUTE Press it to silence the unit. Press it again to activate the sound.
4. Vol . + Press it to increase the volume level.
5. Press it to jump to the previous song.
Note: This function does not work in Aux mode.
6. Press it to play and pause a track.
Press it to decrease the volume level.
9. BT Shortcut to Bluetooth mode.
10. ARC Shortcut to HDMI ARC mode.
8. VOL-
7. Press it to jump to the next song.
Note: This function does not work in Aux mode.
11. OPT Shortcut to digital optical mode.
12. AUX Shortcut to Auxiliary mode.
13. USB Shortcut to USB mode.
14. EQ Press this button to toggle through the following EQ
settings: pop, classic, jazz, country, normal, rock.
3. Select the input mode by pressing the source button located on the right-side
panel.
4. Using the controls on the remote, you can manage and select your tracks,
increase, or lower the volume, mute the sound bar audio, etc.
Pairing the sound bar with your Bluetooth®device
VI. Advanced operation
Troubleshooting
1. Insert one end of the supplied optical digital cable into the matching input jack
on the back of the soundbar and the other end on the device you wish to play
audio from.
2. Turn on the soundbar by pressing the power button located on the right-side
panel of the unit. You can also press the red power button on the remote
control.
3. Select the input mode by pressing the source button located on the right-side
panel.
4. Using the controls on the remote, you can manage and select your tracks,
increase, or lower the volume, mute the sound bar audio, etc.
Note: Before installing this product, please make sure your device is compatible
with Bluetooth®.
1. First, turn on the soundbar by pressing the power button on the side panel or
on the remote control. Bluetooth®(BT) is the selected mode by default. You
can also select the BT mode by pressing the mode selection button in the
remote control. The BT indication will appear on the LED display.
2. Place both devices not more than three feet away from each other.
3. Enable the Bluetooth®function on your audio device and set it to discover the
wireless soundbar.
4. The BT icon will start blinking to indicate that the system has entered into
pairing mode.
5. Once the soundbar appears listed under the newly found Bluetooth®devices
(KSB-00A), the pairing process will start.
6. If pairing is successful, a tone will be heard.
7. If after 60 seconds the pairing process fails, please repeat steps 1 through 6
described above.
Problem Suggested solution
Make sure the power cord is connected correctly to
the power source.
Make sure the audio cable is connected correctly. Turn
up the volume slowly. Press the mute button in case it
was pressed accidentally muting the soundbar.
Install two AAA batteries in the remote. Replace the
current batteries with new ones. Point the remote
control toward the front of the soundbar and make
sure it is within the operating range.
Unplug the soundbar, plug it to a power supply and
turn it on again.
The unit is not turning on.
There is no sound coming
from the soundbar, or the
sound is distorted.
The remote control
doesn’t work.
The buttons on the
soundbar don’t work.
VII. Technical specications
MPN KSB-00A
2.0 sound bar
2 x 30W = 60W
Yes, at 0.7W
110-220V -- 50/60Hz (auto-sensing)
Power/source, Play/pause, Previous track/volume -,
Next track/volume +
Power, Reset, Mute, Volume +, Volume -, play/pause,
Next track, Previous track, BT, ARC, Opt, AUX, USB, EQ
2x 2-inch full range drivers (4580)
60W
140 Hz - 20k Hz
4Ω
980mV
≥58
Bluetooth® v5.0-compatible, USB input
HDMI ARC, optical digital, RCA input
2.4GHz
≥33 ft
Device
Type
Reference RMS rated
Standby
AC input
Buttons in soundbar
Buttons in remote control
Speaker
Driver unit
Maximum power output (RMS)
Frequency
Impedance
Sensitivity
Signal to noise ratio
Connectivity
Connection type
Audio input ports
Wireless frequency
Wireless range
Orange LED display
Preset settings: pop, classic, jazz, country, normal, rock
31.5 x 2.5 x 3.7 in
3.9 lb.
Power cable: 5.2 ft, Aux/RCA cable: 3.9 ft, optical cable:
5.2 ft
Soundbar, auxiliary 3.5mm/RCA cable, digital optical
cable, remote control, user’s guide, 2 AAA batteries
Additional information
Display
Equalizer
Product dimensions
Product weight
Cable length
Package content
NOTESNOTES
Español
I. Introducción
Características
II. Contenido del empaque
Felicitaciones por la compra de su nueva barra de sonido Tunebar con tecnología
Bluetooth®de KlipXtreme®. Te invitamos a visitarnos en www.klipxtreme.com
para recibir asistencia y obtener más información sobre este dispositivo de audio
y otros novedosos productos.
Para aprovechar al máximo tu nueva barra de sonido, tómate unos minutos para
leer las siguientes instrucciones y familiarizarte con el funcionamiento de la unidad.
Antes de configurar el dispositivo, asegúrate de que los siguientes elementos
estén incluidos en la caja:
Con cuidado saca la unidad de la caja. Te recomendamos guardar la caja y todos
los materiales de embalaje originales, en caso de que desees almacenar la unidad
o si alguna vez necesita devolverla para su reparación.
• Barra de sonido de 2 canales y 80 cm con un diseño elegante que ahorra
espacio, que ofrece un audio de alta calidad desde dispositivos con cable o
inalámbricos
• 60 watts de potencia de salida a través de dos unidades de parlantes de
rango completo de 2 pulgadas
• Interfaz HDMI ARC para un sonido envolvente de fácil conexión
• Entradas digital óptica y RCA con cables incluidos
• Compatible con Bluetooth® v5.0 con un alcance mejorado de hasta 10
metros entre la fuente de sonido y la barra de sonido
• Pantalla LED para visualizar el modo seleccionado
• De instalación versátil, puede colocarse sobre una superficie plana o
montarse en la pared
• Control remoto con prácticas opciones de ecualización preestablecidas
• Barra de sonido (1)
• Cables RCA / auxiliar de 3.5 mm (1)
• Cable óptico digital (1)
• Control remoto (1)
• Guía rápida del usuario (1)
• Baterías AAA (2)
Panel trasero
Panel lateral
III. Descripción del producto
1. Encendido/fuente de audio
2. Reproducir/pausa
3. Pista previa/volumen -
4. Pista siguiente/volumen +
1. Entrada HDMI ARC
2. Puerto USB
3. Puerto óptico
4. Entrada RCA
5. Entrada de corriente
1 2 3 4
Control Descripción
1. Encendido/fuente
de audio
Presiona este botón para encenderlo y mantenlo
presionado para apagarlo.
Pulsa este botón para seleccionar la fuente de audio.
2. Reproducir/pausa Presiona este botón para reproducir o dar pausa a la
reproducción de audio. No funciona en modo auxiliar.
Presiónalo para reproducir la pista anterior.
Mantenlo presionado para disminuir el nivel de volumen.
3. Pista previa/volumen -
Presiónalo una vez para reproducir la siguiente pista.
Mantenlo presionado para aumentar el nivel de volumen.
4. Pista siguiente/volumen +
1 432 5
Ce manuel convient aux modèles suivants
1
Table des matières
Langues :
