Kleenmaid TO80S Guide d'installation
OVEN
c o l l e c t i o n
Instructions for Use
and Warranty Details
Deluxe Multifunction Ovens TO80S - Stainless Steel
TO81W - White
TO82B - Black
Congratulations on the purchase of your
new Kleenmaid appliance. This appliance
has been designed and manufactured to
give you years of reliable performance.
For best results, carefully read the
instructions on how to install your new appliance. Correct
installation will avoid delays and unnecessary service calls.
Once installation is complete, read this booklet and get to
know the controls and the features of your new appliance.
If you need further information call our
Customer Care Centre
1300 652 100
We reserve the right to alter the specifications with no
influence on the operation of the appliance. This instruction
manual cannot be reason for claim.
1
CONTENTS
General description...............................................2
Oven operation ......................................................4
Programmer operation...........................................5
Spit roaster.............................................................8
Removing roasting trays ........................................9
Practical advice....................................................10
Tables ..................................................................12
Defrosting ............................................................14
Cleaning ..............................................................15
What to do if.........................................................17
Installation ...........................................................18
Wiring Diagram ...................................................19
Warranty and Service...........................................21
Before using the oven for the first time, it should be switched
on using the program at 250ºC for half hour. This will
eliminate any remains of grease from the manufacturing
process. Then, clean it with soap and water.
High temperatures are reached inside the oven during
cooking. Do not let children near it.
Technical data and oven identification information are given
on the data plate. This is located on the front of the oven. This
plate should be consulted before making any electrical
connections.
IMPORTANT: Electrical connections and repairs must be
made by a specialist familiar with the legal requirements and
standards in your State.
WARNING
The controls can be hidden and revealed
simply by pressing them.
HIDDEN CONTROLS
Roasting and browing.
SPIT ROASTER
This is used to select the cooking temperature,
whether regular or grill (See tables).
The thermostat light switches off when the
temperature is reached and switches on and off
during cooking to maintain the chosen
temperature.
TEMPERATURE SELECTOR
GENERAL DESCRIPTION
Provides clock function plus the programming of
automatic cooking stop, automatic cooking start
and stop, manual cooking and warning functions.
ELECTRONIC PROGRAMMER
23.58
Shelf
2
3
GENERAL DESCRIPTION
This allows you to select oven heating programmes (See tables).
The pilot light comes on when ever a programme is selected.
PROGRAMME SELECTOR
Defrosting: All elements heat to a very low temperature, allowing the
perfect defrosting of food.
Conventional heat: Heats from above and below, in the conventional way.
Traditional heat: Heats from below.
Half grill: For grilling only the centre of the
tray, for small items (plus rotary grill).
Full grill: For grilling from above over the
entire area of the tray (plus rotary grill).
Fan assisted grill: For grilling and roasting,
spreading the heat with a fan.
Fan forced plus traditional heat: Heats from below and in the centre,
spreading the heat with a fan.
Fan assisted conventional heat: Heats from above and below, spreading
the heat with a fan.
When cooking ends, set the
program and temperatures
selectors to zero.
OVEN OPERATION
Place the food into the oven on the
tray at the recommended height .
(See tables)
1
Use the programmer required. See
programmer operating instructions.
2
Select the heating method using
the program selector.
For example: (See tables).
3
23.58
NOTE: The oven must always be used with the door closed for all programmes, including grill.
Select the cooking temperature or the grill
temperature using the temperature selector.
For example: 150ºC (See tables).
4
5
•
•
••
( 0 and
•
)
4
5
PROGRAMMER OPERATION
The programmer can be used to carry out cooking at a certain time, after which the
oven automatically switches off. Even when you´re not at home, the oven will
automatically switch on and then off again when cooking is finished.
In any case, if you do not wish to program the oven, it can be used normally without
the programmer.
The programmer can also be used as an alarm clock (without switching on the
oven) and as a clock.
SETTING THE CLOCK
1
When the oven is installed, or after a
power cut, the display will show 0.00,
flashing.
2
Press and hold in the button and
use the - + buttons to set the time.
For example: 13.30
MANUAL OPERATION
To use the oven without programming,
press the button.
The oven may now be used as described in the "Oven Operation" section.
Remember that the oven is operating without programming and that you will
need to switch it off when cooking is over.
0.00
13.30
2
1
Press and hold in the button and use
the - and + buttons to set the alarm time.
For example: 30min.
If you also want to use the oven, either manually or
with programming, follow the corresponding
instructions.
The alarm will start to sound when the time period
has elapsed; to silence it, press the button.
NOTE: The alarm has three (3) different tones
To change the tone, proceed as follows:
1. With the clock showing the time of day in
Manual Operation Mode displaying the
symbol, ie without any cycle or operation
functions.
2. Wait 10 seconds then press the minus (-)button
once for each new tone. Continue until the
desired tone is reached.
This operation may be carried out in any program
when ever the alarm sounds.
2
Carry out the other starting operations
described in the "Oven Operations". The
alarm will start to sound when cooking
ends and the oven will be switched off. To
silence the alarm, press the button .
Do not forget to set the oven controls to
zero.Press the button to remove the
flashing AUTO display .
1
Press and hold in the and use - + buttons to
select the time. For example:50min.
AUTO appears on the display.
PROGRAMMER OPERATION
You can use the oven without the programmer switching it off but sometimes it´s
handy to be warned after a certain period of time has passed or even as an alarm
clock without cooking.
Remember that the
alarm does not
switch off the oven.
USING THE ALARM
This is used when you want cooking to start now but to stop automatically after a
certain period of time.
PROGRAMMING FOR AUTOMATIC SWITCHING OFF
A
U
T
O
BEEP
6
7
NOTE:You can change the end time and the duration even when the oven is already
working, using the and buttons.
It is advisable, before programming the oven, to make a test programming.
To erase a program, press the button. If the oven controls are not set to zero, it
will continue to function.
Carry out the other starting operations
described in the "Oven Operation". The oven
is now programmed.
In this example, 50 minutes before 14.30,the
oven will switch on and will switch off at 14.30
automatically, at which point the alarm will
sound. Press the button to silence it.
Do not forget to set the oven controls to zero.
Press the button to remove the flashing
AUTO display.
Press and hold in the button and
use the - + buttons to set the hour at
which you want cooking to end.
For example: 14.30
You don´t want to start cooking now - it´s too early and you have to go out, but you
want the oven to have done its work when you return and to have switched off
automatically.
PROGRAMMING FOR DELAYED COOKING
1
PROGRAMMER OPERATION
2
3
Now press and hold in the and
use the - + to select the cooking time.
For example: 50 min.
AUTO appears on the display.
14.30
A
U
T
O
BEEP
SPIT ROASTER
Fit the spit “A” into the spit
support “B”, as shown in Figure
1, and then fit it into the oven as
shown in Figure 2.
1
Skewer food on spit and
secure with sliding blades.
2
Insert spit point in orifice at back of
oven and rest outer end on bracket.
Insert oven tray at bottom shelf level.
Unscrew spit handle to close oven door.
3
Select grill setting and start (See
operation).
IMPORTANT: Always close oven door.
4
When finished roasting, screw spit handle
back on and remove spit. Release sliding
blades and withdraw spit from food.
5
•
1.
2.
8
Autres manuels pour TO80S
1
Ce manuel convient aux modèles suivants
2
Table des matières
Autres manuels Kleenmaid Four
Kleenmaid
Kleenmaid TO100X Manuel utilisateur
Kleenmaid
Kleenmaid FEG 600 X Guide d'installation
Kleenmaid
Kleenmaid OMF6030 Guide d'installation
Kleenmaid
Kleenmaid TO54X Manuel utilisateur
Kleenmaid
Kleenmaid OMFP6010 Manuel utilisateur
Kleenmaid
Kleenmaid OMFP7510 Manuel utilisateur
Kleenmaid
Kleenmaid SOE101X Guide d'installation
Kleenmaid
Kleenmaid FEG605X Guide d'installation
Kleenmaid
Kleenmaid TO70X/1 Manuel utilisateur
Kleenmaid
Kleenmaid OMF6012K Guide d'installation
Kleenmaid
Kleenmaid TO850X Guide d'installation
Kleenmaid
Kleenmaid OFS9021 Guide d'installation
Kleenmaid
Kleenmaid OMFFS9010 Manuel utilisateur
Kleenmaid
Kleenmaid OMF6015 Guide d'installation
Kleenmaid
Kleenmaid OMF6014 Guide d'installation
Kleenmaid
Kleenmaid TO600X Manuel utilisateur
Kleenmaid
Kleenmaid FEC605X Guide d'installation
Kleenmaid
Kleenmaid T0-2 Manuel utilisateur
Kleenmaid
Kleenmaid TO900X Manuel utilisateur
Kleenmaid
Kleenmaid OMFP6011 Manuel utilisateur
