Kiturami KF Manuel utilisateur
KF WOOD BOILERS FOR HEATING AND HOT WATER
INSTALLATION AND OPERATION
MANUAL
HEATING –AIR CONDITIONING
Oil and natural gas Boilers
Thank you for selecting the KF Kiturami wood boiler.
Please read carefully the instruction manual for proper
installation of the boiler and keep it for future use.
CONTENTS
SAFETY WARNINGS
DESCRIPTON OF KF BOILER
INSTALLATION OF KF BOILER
HYDRAULIC INSTALLATION OF KF BOILER
CHIMNEY INSTALLATION
KF BOILER CONTROL
THERMOSTAT CTR - 6080
SAFETY OPERATIONS
KF BOILER ELECTRICAL CONNECTION
KF BOILER IGNITION
CIRCULATOR & AIRVENT
OPERATION
GENERAL WARNINGS
MAINTENANCE
DAMAGES, DETECTION AND SOLUTIONS
TECHNICAL SPECIFICATIONS
2
page 11
page 12-13
page 14
page 14
page 15
page 3
page 4
page 5
page 6
page 7
page 8
page 9
page 9
page 10
page 10
SAFETY WARNINGS
It indicates points to remember with symbols in order to make the use of the boiler easier. In this way you
can see and avoid accidents.
Because your safety and the safety of others is very important, please look at the symbols below carefully
and understand them absolutely before proceeding to read the manual.
Each symbol has following meaning:
General danger,
Warning and caution
Things to be done
Do not touch
Not fire
General prohibitions
Must be grounded
Attention
• Protect the boiler from snow and rain. Ensure that it is instalLED in a covered area for better and safer
operation.
• Do not leave in front of and around the boiler flammable materials.
• In winter, even if you are away from home, do not disconnect the boiler from the mains.
3
DESCRIPTION OF KF BOILER
SAFETY WARNINGS
12
13
14
9
10
11
1
5
6
3
2
7
8
4
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
Boiler cleaning locker
Door for checking the flame
Wood supplying door
Setting the input of air
Boiler control
Power supply
Red and white: thermostat connection
Green wires: circulator connection
Chimney
Cold domestic water inlet
Output of water to radiators
Hot domestic water outlet
Discharge to open expansion tank
Safety valve
4
KF BOILER INSTALLATION
The boiler must be placed in an area with sufficient comfort –spaciousness so you can control it and
maintain it easily.
How to place the boiler:
• Place it on unburned - non-combustible materials, such as concrete which can withstand much weight.
• Never put the boiler in a small, enclosed space without ventilation or a very humid space. This will cause
incomplete combustion because of oxygen deficiency.
• Do not install the boiler in unprotected, open space.
• Connect the plug of the boiler to the mains using a socket only for it.
Attention
The installation should be performed by qualified technicians and in accordance with the
instructions.
5
HYDRAULIC INSTALLATION OF KF BOILER
Install the KF KITURAMI wood boiler according to the following drawing:
Place the open expansion tank at least 1 meter above the rest Plumber Heating.
The diameter of the discharge and filling pipe shall be at least Φ22.
Place an expansion tank and a safety valve in the hydraulic domestic waterinstallation.
Before connecting the domestic water to the boiler measure the pressure of the water supply network.
Then adjust the expansion water tank at the same bar and insert a corresponding safety valve. E.g. we
assume the water is 4 bars. Then select a valve of 6 bars and adjust the expansion tank at 4 bars.
6
WOOD BOILER WIRING
Open expansion
tank
Filling Boiler
Water
Safety Valve
Heating return
Water discharge
Hot domestic water
outlet
Heating flow
Domestic water inlet
CHIMNEY INSTALLATION
The installation of the chimney to the wood boiler plays important role and should be done very carefully.
Place the chimney according to the following drawings:
Connect the horizontal and vertical part of the chimney with a
cleaning T.
The vertical part of the chimney, should be at least 3m.
When neighboring buildings are at 1m distance from the
chimney, install chimney in such a way that it will be 1m or more
higher than the highest roof.
If not properly instalLED the chimney, there will be reduced
performance, soot and operational problems will occur.
Connect drain tube of the boiler.
7
KF - 3203 B BOILER CONTROL
‘Boiler water temperature indication
Ventilator LED
Circulator LED
Low water level LED
Overheating LED
Ventilator activation button
Power (Reset) button
Boiler water temperature indication
Ventilator operation LED
Circulator operation LED
Shows the water temperature in the boiler and displays
trouble codes in case of problems.
During the operation of the ventilator the LED remains open. (it
is turned off automatically when the temperature drops below
40°C).
During the operation of the pump, The LED remains on.
The LED lights in the absence of water in the boiler and is
deactivated the circulator.
The circulation pump resumes when the boiler is filled with
water.
In case of overheating, the LED turns on.
We press the button when we kindle the wood in the boiler
and the water temperature is below 40°C.
Starting the boiler or restarting after failure.
Low water level LED
Overheating LED
Ventilator activation button
Power (Reset)
8
THERMOSTAT (CTR-6080)
Boiler water temperature
display
65
ON/OFF RESET
button
Boiler water
temperature selection
POWER
HEATING
HOT
WATER
Heating room
selection
Hot domestic
water selection
Boiler Water Temperature Display - Displays the water temperature in the boiler with numbers. Also displays
Trouble Codes in case of malfunction.
Boiler Water Temperature Selection –Select the desired temperature from 45°C to ~85°C.
ON/OFF (Reset) Button - Activates or deactivates the boiler. Also restarts the boiler in case of blocking.
(When the boiler is not operating, the thermostat must be closed).
Room Heating Selection - With this option, the boiler works to warm the space.
Hot Domestic Water Selection - The circulation pump stops working and plenty of hot water is available. To
have heating again, you should select the heating room mode.
Safety operations
Anti-freezing protection mode –The circulation pump is activated automatically when the water temperature
drops below 8° C to avoid the formation of ice on the heating network. It automatically returns to normal
operation when the temperature rises to 9° C.
Low water level mode - After filling water in the boiler, the pump will operate for 2 minutes continually to help
the air outcome from the water heating system.
Nonstick protection of the circulation pump mode –It activates the circulation pump, when we have selected the
hot water mode and the water temperature is below 40°C.
KF BOILER ELECTRICAL CONNECTION
• Connect the circulator with the green wires to the boilers.
• Connect the thermostat with the red (+) & white (-) wire to the boiler.
• Insert the plug tothe mains.
KF BOILER IGNITION
• During the first ignition let air damper with an open door.
• Press the POWER button on the boiler control.
• Activate the room thermostat with the ON / OFF button.
• Select the desired water temperature and press the room heating mode selection.
• Place wood in the combustion chamber and kindle the fire.
• Press the button for activating the ventilator.
10
Table des matières
Autres manuels Kiturami Chaudière
Kiturami
Kiturami KF-35B Manuel utilisateur
Kiturami
Kiturami KRP-20A Manuel utilisateur
Kiturami
Kiturami eco condensing - 16D Guide de l'utilisateur
Kiturami
Kiturami KRH-35B Manuel utilisateur
Kiturami
Kiturami Elite Fire Tube Combi Manuel d'installation
Kiturami
Kiturami K1-22E Manuel utilisateur
Kiturami
Kiturami KRP-20PA Manuel utilisateur
Kiturami
Kiturami TURBO CONDENSING - 13 Mode d’emploi
Kiturami
Kiturami PELLET BOILER Manuel utilisateur
Kiturami
Kiturami WORLD PLUS-13D Manuel
Manuels Chaudière populaires d'autres marques
Vaillant
Vaillant uniSTOR VIH SW GB 500 BES Manuel utilisateur
Radijator
Radijator BIO max 23.1 Manuel utilisateur
Brunner
Brunner BSV 20 Manuel utilisateur
Buderus
Buderus Logamax GB062-24 KDE H V2 Manuel utilisateur
Potterton
Potterton 50e Fiche technique
UTICA BOILERS
UTICA BOILERS TriFire Manuel utilisateur
