KitchenAid KFP0923 Manuel utilisateur

Food Processor

KFP0923

W11598979A.indb 1W11598979A.indb 1 4/12/2022 6:14:17 PM4/12/2022 6:14:17 PM

PARTS AND FEATURES

1Heavy-Duty Base

2Power Cord and Cord Storage

(not shown)

3Drive Pin

49-Cup (2.1 L) Work Bowl

5Handle Hinge

6Lid Hinge

7Work Bowl Cover with 2-in-1 Feed

Tube

8Lid Latch

92-piece Food Pusher

10 Refrigerator Lid

11 Reversible Slicing/Shredding Disc

12 Julienne Disc

13 Whisking Accessory

14 Dough Blade

15 Multi-Purpose Four Blade

16 Drive Adapter

W11598979A.indb 2W11598979A.indb 2 4/12/2022 6:14:17 PM4/12/2022 6:14:17 PM

ENGLISH

IMPORTANT SAFEGUARDS

When using electrical appliances, basic safety precautions should always

be followed, including the following:

1. Read all instructions.

2. To protect against risk of electrical shock, do not put Food Processor in water

or other liquid.

3. This appliance is not intended for use by persons (including children) with

reduced physical, sensory or mental capabilities, or lack of experience and

knowledge, unless they are closely supervised and instructed concerning use

of the appliance by a person responsible for their safety. Close supervision is

necessary when any appliance is used by or near children. Children should be

supervised to ensure that they do not play with appliance.

4. Turn the appliance to “Off”, then unplug from the outlet when not in use, before

assembling or disassembling parts and before cleaning. To unplug, grasp the

plug and pull from the outlet. Never pull from the Power Cord.

5. Avoid contacting moving parts.

6. Do not operate any appliance with a damaged cord or plug, or after the

appliance malfunctions, or is dropped or damaged in any manner. Return

appliance to the nearest Authorized Service Facility for examination, repair, or

electrical or mechanical adjustment.

7. The use of attachments/accessories not recommended or sold by KitchenAid

may cause re, electric shock, or injury.

8. Do not use the appliance outdoors.

9. Do not let cord hang over the edge of table or counter.

10. Keep hands and utensils away from moving Blades or Discs while processing

food to reduce the risk of severe injury to persons or damage to the Food

Processor. A scraper may be used but must be used only when the Food

Processor is not running.

PRODUCT SAFETY

W11598979A.indb 3W11598979A.indb 3 4/12/2022 6:14:17 PM4/12/2022 6:14:17 PM

11. Blades are sharp. Handle carefully.

12. To reduce the risk of injury, never place cutting Blade or Discs on Base without

rst putting Bowl properly in place.

13. Be certain Cover is securely locked in place before operating appliance.

14. Never feed food by hand. Always use Food Pusher.

15. Do not attempt to defeat the Cover interlock mechanism.

16. Do not ll the Bowl above the marked maximum ll line (or rated capacity) to

avoid risk of injury due to damage to the Cover or Bowl.

17. Allow the appliance to cool completely before putting on or taking off parts,

and before cleaning the appliance.

SAVE THESE INSTRUCTIONS

PRODUCT SAFETY

ELECTRICAL REQUIREMENTS

This product is designed for household use only.

Voltage: 120 V~

Frequency: 60 Hz

NOTE: This Food Processor is equipped with a polarized plug (one Blade is wider than

the other). To reduce the risk of electrical shock, this plug will fit in a polarized outlet only

one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit,

contact a qualified electrician. Do not modify the plug in any way.

W11598979A.indb 4W11598979A.indb 4 4/12/2022 6:14:17 PM4/12/2022 6:14:17 PM

ENGLISH

ACCESSORIES SELECTION GUIDE

FOR DETAILED INFORMATION ON USING THE FOOD PROCESSOR

Visit www.kitchenaid.com/quickstart for additional instructions with videos, inspiring

recipes, and tips on how to use your Food Processor.

ACTION SETTING FOOD ACCESSORY

Whisking/

Whipping Low or High Cream, Eggs Whisk Accessory

Chop Low or Pulse

Cheese

Chocolate

Fruits

Fresh Herbs

Nuts

Tofu

Vegetables Multi-Purpose Four Blade

Mince or Purée High or Pulse

Mix Low

Pasta Sauce

Pesto

Salsa

Sauces

Batters

Slice

Low

Fruit (soft)

Potatoes

Tomatoes

Vegetables (soft) Reversible Slicing/

Shredding Disc (slicing

side)

High

Cheese

Chocolate

Fruit (hard)

Vegetables (hard)

Shred (medium)

Low Potatoes

Vegetables (soft)

Reversible Slicing/

Shredding Disc (shredding

side)

High

Cabbage

Cheese

Chocolate

Fruits (hard)

Vegetables (hard)

Knead Pulse/High Yeast

Dough Dough Blade

Julienne Disc

1Vegetables (soft)

Julienne Disc

2Vegetables (hard)

W11598979A.indb 5W11598979A.indb 5 4/12/2022 6:14:17 PM4/12/2022 6:14:17 PM

Before ﬁrst use

Before using your Food Processor for the first time, wash all parts and accessories either

by hand or in the dishwasher (see “Care and Cleaning” section).

NOTE: Your Food Processor is designed so that all accessories may be stored inside the

Work Bowl.

Lift up the Lid Latch to unlock the Cover.

Tilt the Work Bowl Cover back and lift it

straight up so that the Lid Hinge pulls out

of the Handle Hinge.

Remove all parts and accessories from

the Work Bowl, and lift the Food Pusher

out of the Feed Tube.

Place the Work Bowl on the Base, aligning

the Handle with the raised button on the

right side of the Base. The Bowl will click

into place and should be flush against the

Base when properly aligned.

Place the Drive Adapter in the Work

Bowl, lowering it onto the Drive Pin.

PRODUCT ASSEMBLY

IMPORTANT: Place the Food Processor on a dry, level countertop with the controls

facing forward. Do not plug in the Food Processor until it is completely assembled.

W11598979A.indb 6W11598979A.indb 6 4/12/2022 6:14:18 PM4/12/2022 6:14:18 PM

ENGLISH

PRODUCT ASSEMBLY

NOTE: For ease of assembly, install the desired Blade or Disc before attaching the

Work Bowl Cover.

NOTE: Your Food Processor will not operate unless the Work Bowl Cover is fully closed

and the Work Bowl is properly seated on the Base.

To attach the Work Bowl Cover, hook the

Lid Hinge into the Handle Hinge on the

Work Bowl and close the Cover.

Once the Work Bowl Cover is closed,

push the Lid Hinge down into the locked

position.

5 6

INSTALLING THE MULTIPURPOSE BLADE OR DOUGH BLADE

Place the Blade on the Drive Adapter.

Rotate the Blade so it falls down to the

base of the Adapter.

Install the Work Bowl Cover, and be sure

the Lid Latch is pushed down to the

locked position.

USING THE REFRIGERATOR LID

To attach the Refrigerator Lid, hook the

Lid Hinge into the Handle Hinge on the

Work Bowl and close the Lid.

Once the Refrigerator Lid is closed, push

the lid firmly to ensure closure.

W11598979A.indb 7W11598979A.indb 7 4/12/2022 6:14:18 PM4/12/2022 6:14:18 PM

PRODUCT ASSEMBLY

INSTALLING THE REVERSIBLE SLICING/SHREDDING DISC OR JULIENNE

DISC

To Slice: Turn the Disc so that the raised

Slicing Blade is facing up.

To Shred: Turn the Disc so that the small,

raised Shredding Blades are facing up.

To Julienne: Insert the Disc so that the

raised Slicing Blade is facing up.

The Disc can be placed in two different

positions: level with the top of the Bowl

for processing, and lower, inside of the

Bowl for storage.

NOTE: Make sure the Disc is level

with the top of the Bowl for best

performance.

Hold the Disc by its center hub and lower

it onto the Drive Adapter, aligning the

mark on the center hub of the Disc to the

matching mark on the Adapter. When

properly placed, the Disc should be level

with the top of the Bowl. If the Disc falls

to the storage position, lift it out, turn it

90°, and lower it again.

Install the Work Bowl Cover, and be sure

the Lid Latch is pushed down to the

locked position.

2 3

Process

Storage

Alignment

marks

W11598979A.indb 8W11598979A.indb 8 4/12/2022 6:14:19 PM4/12/2022 6:14:19 PM

ENGLISH

USING THE WHISKING ACCESSORY

PRODUCT ASSEMBLY

Place the Whisking Accessory onto the

Drive Adapter. Rotate the Whisking

Accessory so it falls down to the base of

the Adapter.

Install the Work Bowl Cover, and be sure

the Lid Latch is pushed down to the

locked position.

PRODUCT USAGE

Rotating Blade Hazard

Always use food pusher.

Keep ngers out of openings.

Keep away from children.

Failure to do so can result in

amputation or cuts.

Before operating the Food Processor, be

sure the Work Bowl, Blades/Disc, and Work

Bowl Cover are properly assembled on the

Base (see the “Product Assembly” section).

To turn on, press Low or High. The Food

Processor will run continuously and the

indicator light will glow.

To turn off, press Low or High again, or

press Off/Pulse.

To use the Pulse function:

Press Off/Pulse for short bursts, or press

and hold for longer bursts. The Pulse

function runs at high speed only. The

Food Processor will turn off when the

Off/Pulse button is released.

1 2

W11598979A.indb 9W11598979A.indb 9 4/12/2022 6:14:19 PM4/12/2022 6:14:19 PM

PRODUCT USAGE

When finished, press the Off/Pulse

button. The indicator light will go out

and the Blade or Disc will slow to a stop.

Wait until the Blade or Disc comes to a

complete stop before removing the Work

Bowl Cover. Be sure to turn off the Food

Processor before removing the Work

Bowl Cover, or before unplugging the

Food Processor.

3 4

USING THE 2-IN-1 FEED TUBE

The 2-in-1 feed tube features a 2-piece

Food Pusher. To slice or shred small items,

insert the 2-piece Food Pusher into the

feed tube.

Use the small feed tube and pusher to

process small or slender items, like single

carrots or celery stalks.

To slowly drizzle oil into ingredients, just ﬁll

the small pusher with the desired amount

of oil. A small hole in the bottom of the

pusher will drizzle the oil at a constant rate.

REMOVING PROCESSED FOODS

Turn the Food Processor off: Press the

Off/Pulse button and unplug the Food

Processor before disassembling.

Lift the Lid Latch to unlock the Work

Bowl Cover, then lift the Cover to

remove.

2-piece

food

pusher

W11598979A.indb 10W11598979A.indb 10 4/12/2022 6:14:19 PM4/12/2022 6:14:19 PM

Table des matières

Langues :

Autres manuels KitchenAid Robot culinaire

KitchenAid

KitchenAid KFP0719L Manuel utilisateur

KitchenAid

KitchenAid 5KFP0919EOB Manuel utilisateur

KitchenAid

KitchenAid KFP0718L Manuel utilisateur

KitchenAid

KitchenAid KFP0711 Manuel utilisateur

KitchenAid

KitchenAid KFP0711WH Manuel utilisateur

KitchenAid

KitchenAid 5KFP0719 Manuel utilisateur

KitchenAid

KitchenAid KFP1333 Manuel utilisateur

KitchenAid

KitchenAid 5KFP1644 Manuel utilisateur

KitchenAid

KitchenAid 5KFPM770 Guide rapide

KitchenAid

KitchenAid KFP1133 Manuel utilisateur

KitchenAid

KitchenAid 5KFP0925BCU0 Manuel utilisateur

KitchenAid

KitchenAid KFP1133WH Manuel utilisateur

KitchenAid

KitchenAid 5KFC3511DWH0 Manuel utilisateur

KitchenAid

KitchenAid KFP0711 Manuel utilisateur

KitchenAid

KitchenAid 4KFP740CR0 Manuel utilisateur

KitchenAid

KitchenAid 4KFP750 Guide rapide

KitchenAid

KitchenAid KFP0718OB Manuel utilisateur

KitchenAid

KitchenAid 5KFP1318 Series Manuel utilisateur

KitchenAid

KitchenAid KFC3100BU1 Manuel utilisateur

KitchenAid

KitchenAid KFP0718BM Manuel utilisateur

KitchenAid

KitchenAid KJA03BE Manuel utilisateur

KitchenAid

KitchenAid KFP0919 Manuel utilisateur

KitchenAid

KitchenAid KFPM770NK0 Manuel utilisateur

KitchenAid

KitchenAid KFC3511 Manuel utilisateur

Manuels Robot culinaire populaires d'autres marques

INNOLIVING

INNOLIVING INN-727 Manuel utilisateur

Berkel

Berkel C32 Manuel utilisateur

Beko

Beko CHP5554W Manuel utilisateur

QUIGG

QUIGG KM 2017Wi.20 Manuel utilisateur

Lakeland

Lakeland PRESS AND CHOP 31557 Manuel utilisateur

Bosch

Bosch MMR08 GB Series Manuel utilisateur

HOFFEN

HOFFEN Chef Express T9532 Manuel utilisateur

Garland

Garland 852 ZG Manuel utilisateur

Robot Coupe

Robot Coupe CL50 Gourmet Manuel utilisateur

SAPIRHOME

SAPIRHOME SP-1111-K Manuel utilisateur

Moulinex

Moulinex DJ3051 Manuel utilisateur

Bosch

Bosch MUM5 Manuel utilisateur

cecotec

cecotec Mambo Touch Manuel utilisateur

Black & Decker

Black & Decker hc 300 Instructions d'installation

Gorenje

Gorenje SBR 1000 DV Manuel utilisateur

Arzum

Arzum AR 1128 Manuel utilisateur

Saturn

Saturn ST-FP0069 Manuel utilisateur

Vitek

Vitek VT-1641 W Manuel utilisateur