Kinivo 301BN Manuel utilisateur
Kinivo 301BN HDMI Switch
User Manual
© 2012 Kinivo LLC. All rights reserved.
Kinivo is a trademark of Kinivo LLC. Bluetooth word mark and the Bluetooth logo are registered trademarks of
Bluetooth SIG. All other trade names are registered trademarks of respective manufacturers. This manual may
not be copied in any media or form without the written consent of Kinivo LLC.
Kinivo Product Support
Online : http://support.kinivo.com
Table of Contents
Important Safety Instructions............................................................................................................ 3
Introduction ........................................................................................................................................ 4
Installation........................................................................................................................................... 4
Front and Side Panel Controls.......................................................................................................................................... 4
Back and Side Panel Connectors..................................................................................................................................... 5
Remote Control ..................................................................................................................................................................... 6
Typical Setup .......................................................................................................................................................................... 6
LED Indication........................................................................................................................................................................ 7
Specications ...................................................................................................................................... 8
FAQ Frequently Asked Questions ..................................................................................................... 8
Operation............................................................................................................................................. 9
HDMI Input Indicator........................................................................................................................................................... 9
Input Selection with the Front Panel Button ...........................................................................................................10
Input Selection with the Remote Control..................................................................................................................10
Automatic Input Selection ...............................................................................................................10
FCC Statement...................................................................................................................................11
Warranty ............................................................................................................................................12
Online Support / Contact Us.............................................................................................................13
Kinivo 301BN HDMI Switch
3
Important Safety Instructions
Please read instructions carefully before operation
1. To prevent risk of electric shock, do not remove cover of the unit. Refer all servicing to qualied service
personnel only.
2. Do not use the switch near water.
3. Clean only with dry cloth.
4. Do not install or place this unit in a bookcase, built-in cabinet or in any other conned Space. Ensure the
unit is well ventilated.
5. To prevent risk of electric shock or re hazard, do not block the unit’s ventilation openings.
6. Do not install near any heat sources such as radiators, stoves, heat registers etc.
7. Unplug during lightning storms or when unused for a long period of time.
8. Protect power cord from being pinched, particularly near plug points.
9. Only use attachments/accessories specied by manufacturer.
CAUTION
RISK OF ELECTRIC SHOCK.
DO NOT OPEN.
Kinivo 301BN HDMI Switch
4
Introduction
The Kinivo HDMI switch enables up to three HDMI source devices (Such as the DVD player, cable box, gaming
console etc.) to be connected to a single HDMI input port on your HDTV or video projector. It can be used
to expand the number of HDMI ports on a single input HDMI equipped audio/video receiver. It is an easy,
convenient and inexpensive solution to expand your home theater setup.
Installation
Front and Side Panel Controls
1) Power Indicator
2) IR Remote Sensor
3) HDMI Output Indicator
4) to 6) HDMI Input Indicator
Power Output Input 1 Input 2 Input 3
SWITCH
3 41 2 5 6
Kinivo 301BN HDMI Switch
5
Back and Side Panel Connectors
OutputInput 1 Input 2 Input 3
1) to 3) HDMI Inputs; 4) HDMI Output
1 32 4
DCPower Jack
+ DC 5V
Kinivo 301BN HDMI Switch
6
Remote Control
Typical Setup
1. Take an HDMI cable and plug one end into the HDMI input port on your HDTV or projector. Plug the other
end to the output port of the HDMI switch
2. Take another HDMI cable and plug one end into the HDMI Output port on your Gaming Console. Plug
the other end into the HDMI Input 1 port of the HDMI Switch.
3. Repeat the above step to connect your Cable Box, Digital Video Recorder (DVR), DVD Player etc.
Functioning
1. Directly select a specic HDMI Input by
choosing 1, 2 or 3
2. Press‘Up’or‘Down’buttons to select the
previous or next input source.
3. Press the “Memory” button to get the
switch to remember the active input
source and select the input source port
automatically when the switch restarts.
Up
1
2
3
Down
1
2
3
Kinivo 301BN HDMI Switch
7
4. Plug the +DC 5V output plug of the power adapter into the DC IN jack of the HDMI Switch (Shown under
‘Side Panel Connector’ on Page 2). Plug the power adapter into an AC power outlet. Your HDMI switch is
now connected and ready for use.
Note: The remote control uses infrared light signal and requires direct line-of-sight to the IR Remote Sensor.
Please make sure that the IR Remote Sensor is not blocked.
LED Indication
RED LED indicates “Signal Not Selected”
BLUE LED indicates “Active Signal Path”
No LED indicates “No Input Signal”
HDMI In
OutputInput 1 Input 2 Input 3
DVD Player
Game Console
HDTV
HDMI Cables
HDMI Cable
Cable Box or DVR
Kinivo 301BN HDMI Switch
8
Specications
FAQ Frequently Asked Questions
1. What do I do if I have a HDCP error?
HDCP errors are usually caused by syncing/handshake problems.
Simply unplug all your devices from the switch
Unplug switch from the power source
Re-Plug all your devices and restart the entire set up again. This should help resolve the issue.
Supported resolution 1080p/1080i/720p/576i/480p/480i
Supported audio format LPCM, Dolby-AC3, DTS7.1, DSD / Dolby,
TrueHD / DTS-HD master Audio
HDCP 1.2 protocol compliant Yes
Supports 3D Yes
Operating temperature range 410F to 1310F
Operating humidity range 5 to 90%
Product size 117mm*64mm*25mm
Kinivo 301BN HDMI Switch
9
2. What do I do if my switch is not working or there is no audio? How do I
diagnose the issue?
Steps to diagnose the device
Ensure all HDMI cables are completely inserted into the switch. Lose connection can cause Issues.
Make sure that the HDMI cables are working. Try a dierent HDMI cable to check if cable is the issue
Ensure your input devices are powered on.
Test with just one input device to diagnose. Check if the input device works directly with the TV. This will
also help verify the HDMI cable. Try pressing the input number on the remote corresponding to where
the input is connected
3. What do I do if Automatic Switching is not working as advertised?
Refer to “Automatic Input Selection” section on page 6 to understand how auto-switching works.
Operation
HDMI Input Indicator
The 301BN Switch has three HDMI Input indicator lights on its front panel. When the switch senses audio/
video transmission on one of its HDMI Input ports, the corresponding HDMI Input Indicator is illuminated in
Red color. When an HDMI Input is selected for use, the corresponding HDMI Input Indicator is illuminated in
Blue. The HDMI Input Indicator is not lit when there is no input signal or no HDMI cable is connected
Kinivo 301BN HDMI Switch
10
Input Selection with the Front Panel Button
To select an HDMI input, press the ‘SWITCH’ button on the front panel of the HDMI switch. Each press of the
button progresses to the next active HDMI INPUT. Signal from the selected HDMI INPUT is sent to the OUTPUT
port and its corresponding HDMI Input Indicator is illuminated in Blue.
Input Selection with the Remote Control
The Up and Down buttons on the remote control have the same function as the SWITCH button on the front
panel. To select an HDMI input, press the Up or Down button on the remote of the HDMI switch. Pressing the
‘Up’ button will move to the next active HDMI Input. Pressing the ‘Down’ button will move to the previous
active HDMI Input. Signal from the selected HDMI Input is sent to the Output port and its corresponding HDMI
Input Indicator is illuminated in Blue.
There are also direct input selection buttons on the remote control (Buttons 1, 2 and 3). Pressing each button
selects the corresponding HDMI INPUT port, no matter whether the port has active input signal or not.
Automatic Input Selection
When 301BN HDMI Switch is powered on for the rst time, it senses input ports automatically and switches
to the input port source automatically in the sequence 1 -> 2 -> 3... It bypasses input ports without signal.
When a new device is turned on, the switch automatically selects that input. For example, if you switch on
your cable TV, the HDMI switch will automatically switch to the cable TV. Turn the currently selected device
o and switch automatically selects the next higher numbered input that has an active signal (1 -> 2 -> 3...)
Note: Some source devices stay in a stand-by mode even when you think they are switched o and always
maintain a connection with the switch. This non-compliant behavior does not allow the HDMI switch to
perform its auto switching. You can test this by looking at the HDMI switch LEDs after switching o your
inputs.
Autres manuels pour 301BN
1
Table des matières
Autres manuels Kinivo Changer
Kinivo
Kinivo 301BN Manuel utilisateur
Kinivo
Kinivo 350BN Manuel utilisateur
Kinivo
Kinivo 350BN Manuel utilisateur
Kinivo
Kinivo HS140 Manuel utilisateur
Kinivo
Kinivo PRO 550BN Manuel utilisateur
Kinivo
Kinivo K500 Manuel utilisateur
Kinivo
Kinivo 501BN Manuel utilisateur
Kinivo
Kinivo 501BN Manuel utilisateur
Kinivo
Kinivo K501 Manuel utilisateur
Kinivo
Kinivo 360BNT Manuel utilisateur
