King Industrial 42900 Manuel utilisateur
INSTRUCTION MANUAL
KING DL
WIRE AND VALVE LOCATING SYSTEM
#42900
WARNING
Read and understand all of the
instructions before operating this
unit. Failure to do so could lead to
injury or death.
2
I
KING INNOVATION
INSTRUCTION MANUAL
TABLE OF CONTENTS
DESCRIPTION ...................................................................................................... 2
SAFETY..................................................................................................................... 2
PURPOSE OF THIS MANUAL..................................................................... 2
IMPORTANT SAFETY INFORMATION .................................................. 3-4
IDENTIFICATION................................................................................................ 5
POWER.................................................................................................................... 6
SETUP ....................................................................................................................... 7
OPERATION ......................................................................................................... 8-15
SPECIFICATIONS ............................................................................................... 16
MAINTENANCE.................................................................................................. 17
DESCRIPTION
The KING DL Wire and Valve Locating System is designed to track
underground wiring, lost sprinkler valves, and broken or severely
damaged wires.
SAFETY
Safety is essential in the use and maintenance of King Innovation
tools and equipment. This instruction manual and any markings
on the tool provide information for avoiding hazards and unsafe
practices related to the use of this tool. Observe all of the safety
information provided.
PURPOSE OF THIS MANUAL
This instruction manual is intended to familiarize all personnel
with the safe operation and maintenance procedures for the King
Innovation KING DL Wire and Valve Locating System. Keep this
manual available to all personnel.
KEEP THIS MANUAL
KING INNOVATION
I
3
KING DL
IMPORTANT SAFETY INFORMATION
DANGER
Immediate hazards which, if not avoided, WILL result in
severe injury or death.
WARNING
Hazards which, if not avoided, COULD result in
severe injury or death.
CAUTION
Hazards or unsafe practices which, if not avoided,
MAY result in injury or property damage.
WARNING
Read and understand this material before operating
or servicing this equipment.
Failure to understand how to safely operate this tool
could result in an accident causing serious injury or death.
DANGER is reserved for conditions and actions that are
likely to cause serious or fatal injury.
WARNING is reserved for conditions and actions that can
cause serious or fatal injury.
CAUTION is reserved for conditions and actions that can
cause injury or instrument damage.
4
I
KING INNOVATION
INSTRUCTION MANUAL
IMPORTANT SAFETY INFORMATION
WARNING
Electric Shock Hazard. Contact with live circuits could result
in severe injury or death.
WARNING
Electric shock hazard:
• Do not expose this unit to rain or moisture
• Use this unit for the manufacturer’s intended purpose only, as
described in this manual. Any other use can impair the protection
provided by the unit.
• Use test leads or accessories that are appropriate for the
application. Refer to the category and voltage rating of the
test lead or accessory.
• Inspect the test leads or accessory before use. They must be clean
and dry, and the insulation must be in good condition.
• Before removing the case or battery cover, remove the test leads
from the circuit and shut off the unit.
Failure to observe these warnings could result in
severe injury or death.
CAUTION
Electric Shock Hazard. Do not connect transmitter to any
active AC circuits.
Failure to observe this precaution may result in injury and
can damage the instrument.
CAUTION
Electric Shock Hazard. Do not attempt to repair this unit.
It contains no user-serviceable parts.
Failure to observe this precaution may result in injury
and can damage the instrument.
KING INNOVATION
I
5
KING DL
KING DL Wire and Valve Locating System Includes:
Please be sure that all items are included before operating.
1. Receiver
2. Headset
3. Transmitter
4. Carrying Case
5. AC Wall Power Unit
6. Inductive Clamp
7. Ground Stake
8. Red Lead
9. Black Lead
10. Battery Cover
1 2 3 4
5678 9
10
6
I
KING INNOVATION
INSTRUCTION MANUAL
POWER
The transmitter is powered by AC adapter or internal batteries. To use
the AC adapter, insert the round plug of the adapter into the “12V”
external power receptacle on the transmitter panel and plug into a
wall outlet.
The transmitter uses 8 “D” (LR20) alkaline or rechargeable batteries
that are installed inside the transmitter battery compartment. Remove
the battery compartment cover to install the batteries.
The receiver is powered by a 9 Volt square (6LR61) alkaline battery.
To install this battery, remove the battery compartment cover located
on the back top portion of the receiver. Install the 9 Volt battery by
connecting it to the battery snap boot inside the battery compartment.
Replace the battery cover.
BATTERY CONDITION INDICATORS
There are battery indicator symbols on the left edge
of both the transmitter and receiver display panels.
These battery symbols will be solid when
the battery is full and reduce as the batteries are depleted.
TRANSMITTER DISPLAY SELECTION
CONTROLS
MODE
CONTROLS
ON/OFF
CONTROLS
DIRECT
CONNECT
LEAD
JACKS
INDUCTIVE
CLAMP
JACK
EXTERNAL
POWER
JACK
KING DL
KING INNOVATION
I
7
KING DL
SELECTION
CONTROLS
ON/OFF
CONTROLS
DIRECT
CONNECT
LEAD
JACKS
KING DL TRANSMITTER
Press and hold the power icon for
about 1 second to display the home screen.
From the home screen you will be able to select
Setup, Broadcast/Clamp, or Direct Clip-On.
SETUP
Select “Setup” from the main menu and use
the arrows to scroll through the following options:
• Power Down: allows the user to select the amount of time that
the unit will remain on before it automatically shuts down to save
battery power.
POWER DOWN
ON, 15 MIN, 30 MIN, 60 MIN
• Battery: allows the user to adjust the KING DL transmitter to be
used with either traditional alkaline batteries or rechargeable ones.
BATTERY
ALKALINE
RECHARGEABLE
• LCD Contrast: Regulates the light/dark ratio on the screen
CONTRAST
1 - 8
• LCD Backlight: sets levels of backlight brightness.
BACKLIGHT
1 - 4
• Pattern: allows users to select either a solid tracing signal or a
pulsating signal. The solid signal uses significantly more battery
power since the signal is continuously activated.
PATTERN
SOLID
BEEP BEEP
HOME
Broadcast
or Clamp
Direct
Clip-On
Setup
EXT
PWR
KING DL
8
I
KING INNOVATION
INSTRUCTION MANUAL
DIRECT CLIP-ON MODE:
• Selecting direct clip-on mode provides power to the
black and red input leads.
• Select LO-F or HI-F. LO-F is used for deep (and,or) long traces.
HI-F is used for shallow and/or short traces.
• LO-F Mode - Adjust power output selector arrows to increase the power
to a visible level on the bar graph. It is best to start with a low level
signal indicated by an “OK” near the power output bar.
Note: If “OK” does not appear, turn off transmitter and
re-locate ground stake.
• Soil conditions affect the effectiveness of the ground.
• HI-F Mode - Select power level 1-4 to give the best response
BROADCAST OR CLAMP
When using one of the two connectionless modes, select “Broadcast or Clamp” from the
Home screen. This turns on transmitter power to the Broadcast antenna in the bottom of
the case. The case then can be positioned over a wire or metal pipe to induce a tracing
signal in it. If the Inductive Clamp is plugged in to the front panel in the mode it becomes
the active antenna and can be used to induce tracing signals on many wires and pipes
by clamping the jaws around the target.
ON
Done
Hi-F
Lo-F
Track
Level1
Power
OK
EXT
PWR
WARNING
DO NOT TOUCH THE METAL RED OR BLACK ALLIGATOR CLIPS ON THE
TRANSMITTER CORDS WHEN THE POWER IS ON, INJURY OR DEATH MAY OCCUR.
Done
ON
EXT
PWR
Broadcast
or Clamp
KING DL
KING DL
KING INNOVATION
I
9
KING DL
KING DL RECEIVER
SETUP
• Turn on receiver. The ready screen will be shown.
Press F2 - Setup and use the arrows to scroll
through the following options:
• Power Down: allows user to select the amount of time that the unit will
remain on before it automatically shuts down to save battery power.
POWER DOWN
ON, 15 MIN, 30 MIN, 60 MIN
LCD DISPLAY
ON/OFF
CONTROL
ADJUSTMENT
CONTROLS
MODE
CONTROLS
HEADSET
JACK
READY
PASSIVE AC
Setup Start
Change
KING DL
KING DL
10
I
KING INNOVATION
INSTRUCTION MANUAL
• Contrast: Regulates the light/dark ratio on the screen
LCD CONTRAST
1 - 8
• Backlight: sets levels of backlight brightness.
LCD BACKLIGHT
1 - 4
• DEFAULT MODE
CLIP-ON - LO-F
CLIP-ON - HI-F
Passive AC
Clamp - BCAST
• Press Start. The receiver becomes active and will display the signal
level. The controls can also increase/decrease the receiver volume.
• When the receiver is active it can be switched from
PEAK to NULL mode.
TRACING WIRE
After the transmitter has been properly connected with a good
ground, turn on the receiver. The receiver defaults to the most recently
used mode with null antenna reception at every start-up. Place the
receiver near the operating transmitter. A beeping sound should be
heard indicating that the receiver is working properly. A steady high
pitched tone could indicate that you are too close to the receiver or
your batteries are low. A fading or scratchy signal may indicate low
battery.
There are two antenna methods for tracing a path; Null or Peak.
The receiver defaults to Null every time it is turned on. Null means
an absence of signal when pointed directly at the cable in question
and louder to the left and/or right of it a few inches. Peak means the
opposite, that the signal is loudest over the cable. You may select
which mode works best. In general, the closer you are to the cable,
the louder the signal should be except for directly over the cable in
the Null mode. The modes can also be flipped while tracing to give a
better indication of path trace quality.
Table des matières
Manuels Unité de contrôle populaires d'autres marques
Festo
Festo Compact Performance CP-FB6-E Manuel de la liste des pièces
Elo TouchSystems
Elo TouchSystems DMS-SA19P-EXTME Manuel utilisateur
JS Automation
JS Automation MPC3034A Manuel utilisateur
JAUDT
JAUDT SW GII 6406 Series Guide rapide
Spektrum
Spektrum Air Module System Manuel utilisateur
BOC Edwards
BOC Edwards Q Series Manuel utilisateur
