Keysight M9601A Manuel de l'opérateur

Keysight M9601A PXIe

Precision Source/Measure Unit

Quick Startup Poster

Installation Procedure

This document provides the brief installation procedure. Go to www.keysight.com/find/m9601a and get Keysight

M9601A Startup Guide and Keysight M9601A software installer. Refer to the Startup Guide for more information.

1. Unpack the module and inspect it for any shipping damage.

2. Verify the shipment contents. The following items must be included in this shipment.

- M9601A PXIe Precision Source/Measure Unit module, 1 ea.

- Connector-Terminal Block, 1 ea.

- Short Bar, 1 ea.

- Certificate of Calibration (without test data), 1 ea.

- Quick Startup Poster (this document), 1 ea.

3. Install the software.

Requirements: The followings are required for installing the software.

- Controller (desktop PC, laptop PC, rackmount PC, or PXIe embedded computer) installed with Keysight IO

Libraries Suite

- Keysight PXIe chassis which has already been set up

Copy the M9601A software installer into the controller, launch it, and follow the instruction prompts to install

the software.

Declaration of Conformity

Declarations of Conformity for this product and for other Keysight products may be downloaded from the Web. Go

to www.keysight.com/go/conformity. You can then search by product number to find the latest Declaration of

Conformity.

Please use ESD Precautions when handling and operating.

*M9601-90100*

This information is subject to change without notice.

M9601-90100

www.keysight.com

4. Install the module.

a. Make sure that the power cord is plugged into a grounded outlet.

b. Make sure that the chassis power switch is Off.

c. If the chassis has multiple fan speed settings, ensure that the fans are set to automatic.

d. Remove the filler panel that covers the slot in which you want to install the module.

e. Remove thread protectors from the top and bottom mounting screws of the module.

f. Hold the module by the injector/ejector handle and slide it into the slot.

g. Latch the module by pulling up on the injector/ejector handle and secure the front panel to the chassis using the

module front-panel mounting screws.

h. Tighten the screws on the module front panel.

i. Install all chassis covers, filler panels, and air scoops after installing the module.

5. Verify operation of the module.

a. Make sure that the chassis and the controller are turned off.

b. If you are using a remote controller (rackmount, desktop, or laptop PC), connect a PXIe cable between the chassis

and the controller.

c. Power up the chassis. Verify that the chassis fans are operating and free of obstructions that may restrict airflow.

d. Power up the controller.

e. Check that the controller automatically recognizes the module in the device manager; e.g. via Start menu >

Windows System Tools > Control Panel > Device Manager. The module should be visible in the device tree.

The controller might request a reboot. Reboot the controller, if requested.

f. Check if the module is also visible in the Keysight Connection Expert; e.g. via Start menu > Keysight Connection

Expert.

Latest Information

To get the latest firmware/software/electronic manuals/support information, go to www.keysight.com. You can then

search them by product number.

Autres manuels pour M9601A

Table des matières

Autres manuels Keysight Instrument de mesure

Keysight

Keysight E5063A Manuel utilisateur

Keysight

Keysight x-series Fiche d'information produit

Keysight

Keysight Streamline Series Guide de l'utilisateur

Keysight

Keysight 53147A Mode d'emploi

Keysight

Keysight PXA N9030A Manuel d'installation et d'exploitation

Keysight

Keysight PD1000A Manuel utilisateur

Keysight

Keysight U8903A Manuel utilisateur

Keysight

Keysight B2900A Manuel utilisateur

Keysight

Keysight M9391A Manuel utilisateur

Keysight

Keysight V3500A Manuel utilisateur

Keysight

Keysight V3500A Manuel utilisateur

Keysight

Keysight N2780B Manuel utilisateur

Keysight

Keysight E4990A Manuel utilisateur

Keysight

Keysight 42941A Manuel d'utilisation

Keysight

Keysight M9709A Guide de l'utilisateur

Keysight

Keysight DOCSIS 3.1 Manuel d'utilisation

Keysight

Keysight N5264A Manuel utilisateur

Keysight

Keysight N5241AU- 927 Manuel d'installation et d'exploitation

Keysight

Keysight N7040A Manuel utilisateur

Keysight

Keysight B2900A Manuel utilisateur

Keysight

Keysight 775D Manuel de service

Keysight

Keysight N6705C Manuel de service

Keysight

Keysight N774-C Series Manuel utilisateur

Keysight

Keysight U1401B Manuel

Manuels Instrument de mesure populaires d'autres marques

Suaoki

Suaoki D40 Manuel utilisateur

Elster

Elster BK-G1.6 Manuel utilisateur

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manuel

Duratool

Duratool D03128 Manuel utilisateur

Vega

Vega VEGAPULS 65 Manuel utilisateur

Tonghui

Tonghui TH2618B Manuel utilisateur

Tenmars

Tenmars TM-801 Manuel utilisateur

MSR

MSR 145 Manuel utilisateur

TPS

TPS WP-82 Manuel utilisateur

ELMETRON

ELMETRON CP-511 Manuel utilisateur

PCB Piezotronics

PCB Piezotronics 003C30 Manuel utilisateur

Tenma

Tenma 72-10465 Manuel utilisateur

Endress+Hauser

Endress+Hauser Proline Promag 50 Caractéristiques techniques

Siemens

Siemens SITRANS F Coriolis FCT030 Manuel de la liste des pièces

KLINGER

KLINGER CMF V Series Manuel utilisateur

EXFO

EXFO FTB-2 Manuel d'exploitation et d'entretien

ADTEK

ADTEK MW-5 Manuel utilisateur

Acterna

Acterna MS1400 Manuel utilisateur