Keysight V3500A Manuel utilisateur

Keysight V3500A

Handheld RF Power Meter

User’s Guide

II V3500A User’s Guide

Notices

No part of this manual may be reproduced in

any form or by any means (including elec-

tronic storage and retrieval or translation

into a foreign language) without prior agree-

ment and written consent from Keysight

Technologies as governed by United States

and international copyright laws.

Manual Part Number

V3500-90001

Edition

Edition 7, December 12, 2014

Keysight Technologies

1400 Fountaingrove Parkway

Santa Rosa, CA 95403

Trademark Acknowledgements

Microsoft, Visual Studio, and Windows are

U.S. registered trademark of Microsoft

Corporation.

Pentium is a U.S. registered trademark of

Intel Corporation.

Warranty

The material contained in this docu-

ment is provided “as is,” and is sub-

ject to being changed, without notice,

in future editions. Further, to the max-

imum extent permitted by applicable

law, Keysight disclaims all warran-

ties, either express or implied, with

regard to this manual and any infor-

mation contained herein, including

but not limited to the implied warran-

ties of merchantability and fitness for

a particular purpose. Keysight shall

not be liable for errors or for inciden-

tal or consequential damages in con-

nection with the furnishing, use, or

performance of this document or of

any information contained herein.

Should Keysight and the user have a

separate written agreement with

warranty terms covering the material

in this document that conflict with

these terms, the warranty terms in the

separate agreement shall control.

Technology Licenses

The hardware and or software described in

this document are furnished under a license

and may be used or copied only in accor-

dance with the terms of such license.

Restricted Rights Legend

U.S. Government Restricted Rights. Soft-

ware and technical data rights granted to

the federal government include only those

rights customarily provided to end user cus-

tomers. Keysight provides this customary

commercial license in Software and techni-

cal data pursuant to FAR 12.211 (Technical

Data) and 12.212 (Computer Software) and,

for the Department of Defense, DFARS

252.227-7015 (Technical Data - Commercial

Items) and DFARS 227.7202-3 (Rights in

Commercial Computer Software or Com-

puter Software Documentation).

Safety Notices

CAUTION

A CAUTION notice denotes a haz-

ard. It calls attention to an operat-

ing procedure, practice, or the like

that, if not correctly performed or

adhered to, could result in damage

to the product or loss of important

data. Do not proceed beyond a

CAUTION notice until the indicated

conditions are fully understood and

met.

WARNING

A WARNING notice denotes a

hazard. It calls attention to an

operating procedure, practice, or

the like that, if not correctly per-

formed or adhered to, could result

in personal injury or death. Do not

proceed beyond a WARNING

notice until the indicated condi-

tions are fully understood and

met.

V3500A User’s Guide III

Safety Symbols

The following symbols on the instrument and in the documentation

indicate precautions which must be taken to maintain safe operation of

the instrument.

Direct current (DC)

Equipment protected throughout by

double insulation or reinforced

insulation

Alternating current (AC)

Off (supply)

Both direct and alternating current On (supply)

Three-phase alternating current Caution, risk of electric shock

Earth (ground) terminal Caution, risk of danger (refer to this manual

for specific Warning or Caution information)

Protective conductor terminal Caution, hot surface

Frame or chassis terminal Out position of a bi-stable push control

Equipotentiality In position of a bi-stable push control

IV V3500A User’s Guide

General Safety Information

The following general safety precautions must be observed during all

phases of operation, service, and repair of this instrument. Failure to

comply with these precautions or with specific warnings elsewhere in this

manual violates safety standards of design, manufacture, and intended

use of the instrument. Keysight Technologies assumes no liability for the

customer’s failure to comply with these requirements.

WARNING

• Observe all markings on the instrument before connecting any wiring

to the instrument.

• Do not operate the instrument in an explosive atmosphere or in the

presence of flammable gases or fumes.

• Do not service or perform adjustments alone. Under certain condition,

hazardous voltages may exist, even with the equipment switched off.

To avoid dangerous electric shock, service personnel must not

attempt internal service or adjustment unless another person,

capable of rendering resuscitation or first aid, is present.

•Do not substitute parts or modify equipment to avoid the danger of

introducing additional hazards. Return the instrument to Keysight

Sales Office for service and repair to ensure the safety features are

maintained.

• Do not operate damaged equipment as the safety protection features

built into this instrument may have been impaired, either through

physical damage, excessive moisture, or any other reason. Remove

power and do not use the instrument until safe operation can be

verified by service-trained personnel. If necessary, return the

instrument to Keysight Technologies Sales and Service Office for

service and repair to ensure the safety features are maintained.

CAUTION

•Ensure proper insertion of battery in the power meter, and follow the

correct polarity.

V3500A User’s Guide V

Environmental Conditions

This instrument is designed for indoor use and in an area with low

condensation with use of standard or compatible test probes. The table

below shows the general environment requirements for this instrument.

Environment conditions Requirements

Operating environment 0°C to 50°C

Operating relative humidity 80% RH for temperature up to 35 °C,

non-condensing

Storage environment –10 °C to 70 °C

Altitude Up to 2000 meters

Pollution degree Pollution Degree 2

CAUTION

•The Keysight V3500A complies with the following safety and EMC

requirements:

•IEC 61326-2-1:2005/ EN 61326-2-1:2006

•Canada: ICES-001:2004

•Australia/New Zealand: AS/NZS CISPR11: 2004

•Degradation of some instrument specifications can occur in the presence of

ambient electromagnetic (EM) fields and noise that are coupled to the

powerline or I/O cables of the instrument. The instrument will self-recover and

operate to all specifications when the source of ambient EM field and noise are

removed or when the instrument is protected from the ambient EM field or

when the instrument cabling is shielded from the ambient EM noise.

VI V3500A User’s Guide

Regulatory Markings

The CE mark is a registered trademark

of the European Community. This CE

mark shows that the product complies

with all the relevant European Legal

Directives.

The C-tick mark is a registered

trademark of the Spectrum

Management Agency of Australia. This

signifies compliance with

the Australia EMC Framework

regulations under the terms of the

Radio Communication Act of 1992.

ICES/NMB-001 indicates that this ISM

device complies with the Canadian

ICES-001.

Cet appareil ISM est confomre a la

norme NMB-001 du Canada.

This instrument complies with the

WEEE Directive (2002/96/EC) marking

requirement. This affixed product label

indicates that you must not discard

this electrical or electronic product in

domestic household waste.

V3500A User’s Guide VII

Waste Electrical and Electronic Equipment (WEEE) Directive

2002/96/EC

This instrument complies with the WEEE Directive (2002/96/EC) marking

requirement. This affixed product label indicates that you must not discard

this electrical or electronic product in domestic household waste.

Product Category:

With reference to the equipment types in the WEEE directive Annex 1, this

instrument is classified as a “Monitoring and Control Instrument” product.

The affixed product label is as shown below.

Do not dispose in domestic household waste

To return this unwanted instrument, contact your nearest Keysight

Technologies, or visit:

www.keysight.com/environment/product

for more information.

VIII V3500A User’s Guide

In This Guide…

1GettingStarted

This chapter introduces the key features of the V3500A Handheld RF

Power Meter and prepares the power meter for initial setup.

2 Knowing your Instrument

This chapter specifies the characteristics, environmental conditions, and

specifications of the V3500A Handheld RF Power Meter. This chapter

contains a brief description of the instrument outlook, front panel

operation, and front panel procedure.

3 Driver Installation and Commands

This chapter provides you the step-by-step programming driver installation

procedure, remote USB operation, and basic drive commands of the

V3500A Handheld RF Power Meter.

4RFMeasurementBasics

This chapter describes the RF measurement basics of the V3500A

Handheld RF Power Meter.

5 Characteristics and Specifications

This chapter describes the instrument characteristics and specifications

of the V3500A Handheld RF Power Meter.

Autres manuels pour V3500A

Table des matières

Autres manuels Keysight Instrument de mesure

Keysight

Keysight M9601A Guide de l'utilisateur

Keysight

Keysight N6854A Manuel utilisateur

Keysight

Keysight InfiniiMax III+ Series Manuel utilisateur

Keysight

Keysight N5241AU- 927 Manuel d'installation et d'exploitation

Keysight

Keysight 478A Manuel de service

Keysight

Keysight N9010B EXA Manuel d'installation et d'exploitation

Keysight

Keysight N9040B Option 513 Manuel utilisateur

Keysight

Keysight 4284A Guide d'installation

Keysight

Keysight Streamline Series Manuel utilisateur

Keysight

Keysight B2980 Series Mode d'emploi

Keysight

Keysight N9913A Manuel utilisateur

Keysight

Keysight PNA-X N5241A Manuel d'installation et d'exploitation

Keysight

Keysight x series Guide de démarrage rapide

Keysight

Keysight N5221A Manuel utilisateur

Keysight

Keysight N9030A Manuel utilisateur

Keysight

Keysight N774-C Series Manuel utilisateur

Keysight

Keysight EXA X-Series N9010A Manuel utilisateur

Keysight

Keysight N1911A Manuel utilisateur

Keysight

Keysight E8362-60109 Manuel d'installation et d'exploitation

Keysight

Keysight InfiniiMax III+ N7000 Manuel utilisateur

Keysight

Keysight MXA Series Manuel d'installation et d'exploitation

Keysight

Keysight x-series Manuel utilisateur

Keysight

Keysight M9383B VXG-m Manuel utilisateur

Keysight

Keysight M9290A Manuel utilisateur

Manuels Instrument de mesure populaires d'autres marques

Suaoki

Suaoki D40 Manuel utilisateur

Elster

Elster BK-G1.6 Manuel utilisateur

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manuel

Duratool

Duratool D03128 Manuel utilisateur

Vega

Vega VEGAPULS 65 Manuel utilisateur

Tonghui

Tonghui TH2618B Manuel utilisateur

Tenmars

Tenmars TM-801 Manuel utilisateur

MSR

MSR 145 Manuel utilisateur

TPS

TPS WP-82 Manuel utilisateur

ELMETRON

ELMETRON CP-511 Manuel utilisateur

PCB Piezotronics

PCB Piezotronics 003C30 Manuel utilisateur

Tenma

Tenma 72-10465 Manuel utilisateur

Endress+Hauser

Endress+Hauser Proline Promag 50 Caractéristiques techniques

Siemens

Siemens SITRANS F Coriolis FCT030 Manuel de la liste des pièces

KLINGER

KLINGER CMF V Series Manuel utilisateur

EXFO

EXFO FTB-2 Manuel d'exploitation et d'entretien

ADTEK

ADTEK MW-5 Manuel utilisateur

Acterna

Acterna MS1400 Manuel utilisateur