Keysight Technologies PD1500A Guide d'installation

Keysight PD1500A

Double-Pulse Test Rack and

Safety Enclosure

Provides detailed information to set-up, operate

and maintain the PD1500A Dynamic Power Device

Analyzer/Double-Pulse Test Rack and Safety En-

closure. This guide is for system operators and

includes safety guidelines.

Operation and

General Maintenance

Notices

No part of this manual may be repro-

duced in any form or by any means

(including electronic storage and retrieval

or translation into a foreign language)

without prior agreement and written con-

sent from Keysight Technologies, Inc. as

governed by United States and interna-

tional copyright laws.

Manual Part Number

PD1500-90003

Edition

Third Edition, June 2021

Published by

Keysight Technologies, Inc.

900 S. Taft Ave.

Loveland, CO 80537 USA

Sales and Technical Support

To contact Keysight for sales and techni-

cal support, refer to the support links on

the following Keysight websites:

www.keysight.com/find/PD1500A

(product-specific information and sup-

port, software and documentation

updates)

www.keysight.com/find/assist (world-

wide contact information for repair and

service)

Declaration of Conformity

Declarations of Conformity for this prod-

uct and for other Keysight products may

be downloaded from the Web. Go to

http://keysight.com/go/conformity and

click on “Declarations of Conformity.” You

can then search by product number to

find the latest Declaration of Conformity.

Technology Licenses

The hardware and/or software described

in this document are furnished under a

license and may be used or copied only in

accordance with the terms of such

license.

Warranty

THE MATERIAL CONTAINED IN THIS

DOCUMENT IS PROVIDED “AS IS,” AND

IS SUBJECT TO BEING CHANGED,

WITHOUT NOTICE, IN FUTURE EDI-

TIONS. FURTHER, TO THE MAXIMUM

EXTENT PERMITTED BY APPLICABLE

LAW, KEYSIGHT DISCLAIMS ALL WAR-

RANTIES, EITHER EXPRESS OR IMPLIED,

WITH REGARD TO THIS MANUAL AND

ANY INFORMATION CONTAINED

HEREIN, INCLUDING BUT NOT LIMITED

TO THE IMPLIED WARRANTIES OF MER-

CHANTABILITY AND FITNESS FOR A

PARTICULAR PURPOSE. KEYSIGHT

SHALL NOT BE LIABLE FOR ERRORS OR

FOR INCIDENTAL OR CONSEQUENTIAL

DAMAGES IN CONNECTION WITH THE

FURNISHING, USE, OR PERFORMANCE

OF THIS DOCUMENT OR OF ANY INFOR-

MATION CONTAINED HEREIN. SHOULD

KEYSIGHT AND THE USER HAVE A SEP-

ARATE WRITTEN AGREEMENT WITH

WARRANTY TERMS COVERING THE

MATERIAL IN THIS DOCUMENT THAT

CONFLICT WITH THESE TERMS, THE

WARRANTY TERMS IN THE SEPARATE

AGREEMENT SHALL CONTROL.

Keysight Technologies does not warrant

third-party system-level (combination of

chassis, controllers, modules, etc.) per-

formance, safety, or regulatory compli-

ance unless specifically stated.

DFARS/Restricted Rights

Notices

If software is for use in the performance

of a U.S. Government prime contract or

subcontract, Software is delivered and

licensed as “Commercial computer soft-

ware” as defined in DFAR 252.227-7014

(June 1995), or as a “commercial item” as

defined in FAR 2.101(a) or as “Restricted

computer software” as defined in FAR

52.227-19 (June 1987) or any equivalent

agency regulation or contract clause.

Use, duplication or disclosure of Software

is subject to Keysight Technologies’ stan-

dard commercial license terms, and non-

DOD Departments and Agencies of the

U.S. Government will receive no greater

than Restricted Rights as defined in FAR

52.227-19(c)(1-2) (June 1987). U.S. Gov-

ernment users will receive no greater

than Limited Rights as defined in FAR

52.227-14 (June 1987) or DFAR 252.227-

7015 (b)(2) (November 1995), as applica-

ble in any technical data.

Safety Information

The following general safety precau-

tions must be observed during all

phases of operation of these instru-

ments. Failure to comply with these

precautions or with specific warnings

or operating instructions in the product

manuals violates safety standards of

design, manufacture, and intended use

of the instruments. Keysight Technolo-

gies assumes no liability for the cus-

tomer's failure to comply with these

requirements.

General

Do not use these instruments in any manner

not specified by the manufacturer. The pro-

tective features of these instruments must

not be impaired if it is used in a manner

specified in the operation instructions.

Before Applying Power

Verify that all safety precautions are taken.

Make all connections to the instruments

before applying power. Note the external

markings described under “Safety Symbols”.

Ground the Instrument

Keysight instruments are provided with

a grounding-type power plug. The

instruments must be connected to an

electrical ground to minimize shock

hazard. The ground pin must be firmly

connected to an electrical ground

(safety ground) terminal at the power

outlet. Any interruption of the protec-

tive (grounding) conductor or discon-

nection of the protective earth terminal

will cause a potential shock hazard

that could result in personal injury.

Unless otherwise noted in the specifi-

cations, these instruments or system is

intended for indoor use in an installa-

tion category II, pollution degree 2

environment per IEC 61010-1 and 664

respectively. They are designed to

operate at a maximum relative humid-

ity of 50% to 80% at 30 °C or less (non-

condensing). These instruments or sys-

tem are designed to operate at alti-

tudes up to 3000 meters, and at

temperatures between 20 and 30 °C.

Do Not Operate in an Explosive Atmo-

sphere Do not operate in the presence

of flammable gases or fumes.

Do Not Operate Near Flammable

Liquids

Do not operate the instruments in the

presence of flammable liquids or near

containers of such liquids.

Cleaning

Clean the outside of the Keysight

instruments with a soft, lint-free,

slightly dampened cloth. Do not use

detergent or chemical solvents.

Do Not Remove Instrument Cover

Only qualified, service-trained person-

nel who are aware of the hazards

involved should remove instrument

covers. Always disconnect the power

cable and any external circuits before

removing the instrument cover.

Keep away from live circuits

Operating personnel must not remove

equipment covers or shields. Proce-

dures involving the removal of covers

and shields are for use by service-

trained personnel only. Under certain

conditions, dangerous voltages may

exist even with the equipment

switched off. To avoid dangerous elec-

trical shock, DO NOT perform proce-

dures involving cover or shield removal

unless you are qualified to do so.

DO NOT operate damaged

equipment

Whenever it is possible that the safety

protection features built into these

instruments have been impaired, either

through physical damage, excessive

moisture, or any other reason,

REMOVE POWER and do not use the

instrument until safe operation can be

verified by service-trained personnel. If

necessary, return the product to a Key-

sight Technologies Sales and Service

Office for service and repair to ensure

the safety features are maintained.

DO NOT block the primary

disconnect

The primary disconnect device is the

appliance connector/power cord when

an instrument used by itself, but when

installed into a rack or system the dis-

connect may be impaired and must be

considered part of the installation.

Do Not Modify the Instrument

Do not install substitute parts or per-

form any unauthorized modification to

the product. Return the product to a

Keysight Sales and Service Office to

ensure that safety features are main-

tained.

In Case of Damage

Instruments that appear damaged or

defective should be made inoperative

and secured against unintended oper-

ation until they can be repaired by

qualified service personnel.

Measurement Limits

The Truevolt Series DMMs provide pro-

tection circuitry to prevent damage to

the instrument and to protect against

the danger of electric shock, provided

the Measurement Limits are not

exceeded. To ensure safe operation of

the instrument, do not exceed the

Measurement Limits shown on the

front and rear panel.

The DMMs comply with EN/IEC 61326-

2-1, for sensitive test and measure-

ment equipment.

When subjected to transient radiated

and/or conducted electromagnetic

phenomena, the DMMs may have tem-

porary loss of function or performance

which is self-recovering. Recovery may

take longer than 10 seconds.

When subjected to continuously pres-

ent electromagnetic phenomena, some

degradation of performance may

occur.

Safety and Regulatory Symbols

A CAUTION denotes a hazard. It

calls attention to an operating pro-

cedure or practice that, if not cor-

rectly performed or adhered to,

could result in damage to the

product or loss of important data.

Do not proceed beyond a CAUTION

notice until the indicated condi-

tions are fully understood and met.

A WARNING denotes a hazard. It

calls attention to an operating pro-

cedure or practice, that, if not cor-

rectly performed or adhered to,

could result in personal injury or

death. Do not proceed beyond a

WARNING notice until the indi-

cated conditions are fully under-

stood and met.

Products display the following:

The CE marking is a registered trade-

mark of the European Community (if

accompanied by a year, it is the year

when the design was proven). It indi-

cates that the product complies with

all relevant EU directives.

The Regulatory Compliance Mark

(RCM) is a registered trademark of the

Australian Communications and Media

Authority.

The CSA mark is a registered trade-

mark of the Canadian Standards Asso-

ciation and indicates compliance to

the standards laid out by them. Refer

to the product Declaration of Confor-

mity for details.

Waste Electrical and

Electronic

Equipment (WEEE)

Directive

2002/96/EC

This WEEE symbol indicates separate

collection for electrical and electronic

equipment, mandated under EU law as

of August 13, 2005. All electric and

electronic equipment are required to

be separated from normal waste for

disposal. Cable or components and

sub-assemblies contained within a

product are typically not marked.

To return unwanted products, contact

your local Keysight office for more

information.

South Korean Certification (KC) mark.

It includes the marking’s identifier

code.

This symbol represents the time period

during which no hazardous or toxic

substance elements are expected to

leak or deteriorate during normal use.

Forty years is the expected useful life

of this product.

Universal recycling symbol. This sym-

bol indicates compliance with the

China standard GB 18455-2001 as

required by the China RoHS regula-

tions for paper/fiberboard packaging.

Refer to manual for

additional safety

information.

Earth Ground.

Chassis Ground.

Alternating Current (AC).

Direct Current (DC).

Standby Power. Unit is not

completely disconnected

from AC mains when power

switch is in standby position

Indicates that antistatic

precautions should be

taken.

DANGER:

High Voltage

Hot Surface; DO NOT

Touch!

R-R-Kst-SP19629

Safety Warnings

The following warnings and cautions are applicable to the Double-Pulse Test Rack and Safety

Enclosure. Observe all safety precautions and warnings.

Grounding

This product has not been evaluated for connection to an IT power system, an AC distribution system

having no direct connection to earth (ground), according to EN60950.

Leakage Current

Power Limitations

Accessories

Intended Use of Equipment

The Keysight Double-Pulse Test Rack and Safety Enclosure and Test Fixtures, along with the

recommended accessories, are intended to be used for the PD1500A Dynamic Power Device

Analyzer/Double-Pulse Tester.

This is a safety class I product and has a protective earthing

(grounding) terminal. There must be an un-interruptible safety

earth ground from the main power source to the product's input

wiring terminals, power cord, or supplied cord set. Whenever it is

likely that the protection has been impaired, disconnect the power

cord until the ground has been restored.

Due to the instruments installed in this cabinet, there is a risk of

leakage current (> 3.5 mA). Reliable ground circuit continuity is

required for safe operation of this product. To reduce the risk of

electrical shock, an earth (ground) connection is essential before

connecting the AC power mains. Never operate the system with the

ground connector disconnected. Use a permanent safety ground

connection (described in PD1500A System Installation Guide

Chapter 1) or a plug meeting the IEC 60309 (CEE plug) requirements.

To reduce the risk of overload, do not load any single PDU with more

than a maximum of 16 Amperes. In addition, do not load a single

NEMA 5-15 or IEC-320 receptacle with more than 15 Amperes.

This product is designed for use with specific electrical accessories

(i.e., PDUs, fans, oscilloscope & probes, high voltage cables, etc.).

The use of any other accessory is not recommended or supported.

vii

WARNING

HIGH VOLTAGE

is used in the operation of this equipment.

LETHAL VOLTAGE on CONTACT

may be present at measurement terminals if you fail to implement all safety precautions.

• When the RED light on the light tower is on inside the Double-Pulse Test Rack and Safety

Enclosure, lethal voltage (±1000 V dc/pulse) may appear at measurement terminals.

• Never attempt to defeat the safety interlock function of the Safety Hood.

• Do not operate the system unless another person is around the work space who is familiar with

system operation and hazards or administering first aid.

• Potential voltages less than ±500 V may cause death under certain conditions. Therefore,

adequate preventive measures must be taken at all times!

Safety Summary

The following general safety precautions must be observed during all phases of operation, service, and

repair of this system. Failure to comply with these precautions or with specific warnings elsewhere in

this manual may impair the protections provided by the system. In addition, it violates safety standards

of design, manufacture, and intended use of the system. Keysight Technologies assumes no liability for

customer’s failure to comply with these requirements.

Product manuals are available on the Web. Go to www.keysight.com/find/PD1500A for all

documentation.

Hazardous voltage: System maximum output voltage may appear at the

measurement terminals inside the Safety Hood. Never attempt to bypass the safety

interlock and features of the PD1500A Double-Pulse Test Solution Rack and Safety

Enclosure. To avoid contact with extremely high voltages, the rack cabinet must be

operated with all side, front, and rear panels in place and the Safety Hood must

remain closed. There are no user-serviceable parts inside.

Do not intentionally modify the interlock function of the Safety Hood. While

the high voltage indicator is lit, dangerous voltage or residual charge may

appear on the measurement terminals.

Some of the material in the safety enclosure can generate static electricity. Take

care if you are using ESD sensitive devices in its vicinity.

viii

DANGEROUS PROCEDURE WARNINGS

• Warnings shall be complied. Procedures throughout in this manual prevent you from potential

hazardous situations. The instructions contained in the warnings must be followed.

BEFORE APPLYING POWER

• Verify that all safety precautions are taken. Make all connections to the system before applying

power. Note the system's external markings described under “Safety and Regulatory Symbols”.

GROUND THE RACK

• This is Safety Class I system. To minimize shock hazard, the Rack and Safety Enclosure must be

connected to an electrical ground. The power terminal and the power cable must meet

International Electrotechnical Commission (IEC) safety standards.

DO NOT OPERATE IN AN EXPLOSIVE ATMOSPHERE

• Do not operate the system in the presence of flammable gases or fumes. Operation of any

electrical instrument in such an environment constitutes a definite safety hazard.

DO NOT REMOVE COVERS

• No operator serviceable parts inside. Refer servicing to qualified personnel. To prevent

electrical shock do not remove covers.

IN CASE OF DAMAGE

• Instruments, probes or cables that appear damaged or defective should be made inoperative

and secured against unintended operation until they can be repaired by qualified service

personnel. Return the product to a Keysight Technologies sales or service office for service and

repair to ensure that safety features are maintained.

USE ONLY THE SPECIFIC ACCESSORIES

• Specified accessories satisfy the requirements for specific characteristics for using the

instruments and the Rack and Safety Enclosure.

CLEANING

• Disconnect the power from the rack before cleaning the Rack and Safety Enclosure. Use only a

damp cloth to clean the surfaces of the Rack and Safety Enclosure.

Do not use this system in any manner not specified by the manufacturer. The

protective features of this system may be impaired if it is used in a manner not

specified in the operation instructions. This system is an INDOOR USE product only.

This system complies with INSTALLATION CATEGORY II for mains input and

INSTALLATION CATEGORY I for measurement input terminals, and POLLUTION

DEGREE 2 defined in IEC 61010-1.

If an system is marked CAT I (IEC Measurement Category I), or it is not marked with a

measurement category, its measurement terminals must not be connected to line-

voltage mains.

Safety of any system incorporating the equipment is the responsibility of the

assembler of the system.

Keysight DPT Rack and Safety Enclosure Operation Guide ix

PD1500A Dynamic Power Device Analyzer/

Double-Pulse Test System Documentation

PD1500A DPT Rack and Safety

Enclosure Installation Guide

Install the PD1500A

Double-Pulse

Test System

Install and use

the Si/SiC Test

Fixture and

Modules

Test Fixture & Modules

Installation and Use Guide

Operate and

maintain the

Rack and Safety

Enclosure

Rack and Safety

Enclosure Operation Guide

Install, configure

and use the

System Control

Software

PD1500A Control

Software Guide

Autres manuels pour PD1500A

Table des matières

Autres manuels Keysight Technologies Équipement de test

Keysight Technologies

Keysight Technologies N7015A Manuel utilisateur

Keysight Technologies

Keysight Technologies U3020AD01 Manuel

Keysight Technologies

Keysight Technologies 11683AZ Option H01 Manuel de service

Keysight Technologies

Keysight Technologies InfiniiVision 2000 X Series Manuel utilisateur

Keysight Technologies

Keysight Technologies InfiniiVision 3000G X Series Manuel utilisateur

Keysight Technologies

Keysight Technologies InfiniiVision DSOX1204A Manuel

Keysight Technologies

Keysight Technologies N4000A SNS Series Manuel de service

Keysight Technologies

Keysight Technologies 16034E Manuel d'utilisation

Keysight Technologies

Keysight Technologies 16192A Manuel d'utilisation

Keysight Technologies

Keysight Technologies 11644A Series Manuel

Keysight Technologies

Keysight Technologies N2830A Series Manuel utilisateur

Keysight Technologies

Keysight Technologies N108 A-Series Manuel utilisateur

Keysight Technologies

Keysight Technologies M9703A Guide de l'utilisateur

Keysight Technologies

Keysight Technologies InfiniiVision 1000 X Series Manuel utilisateur

Keysight Technologies

Keysight Technologies 8494 Manuel de service

Keysight Technologies

Keysight Technologies P9241A Guide de l'utilisateur

Keysight Technologies

Keysight Technologies U2941A Manuel utilisateur

Keysight Technologies

Keysight Technologies U3020AD01 Manuel

Keysight Technologies

Keysight Technologies 16190B Manuel d'utilisation

Keysight Technologies

Keysight Technologies Infiniium MXR Series Manuel utilisateur

Keysight Technologies

Keysight Technologies U1610/20A Manuel utilisateur

Keysight Technologies

Keysight Technologies 16380V Manuel d'utilisation

Keysight Technologies

Keysight Technologies InfiniiVision M9241A Manuel utilisateur

Keysight Technologies

Keysight Technologies InfiniiVision 1000 X-Series Manuel utilisateur

Manuels Équipement de test populaires d'autres marques

SMART

SMART KANAAD SBT XTREME 3G Series Manuel utilisateur

Agilent Technologies

Agilent Technologies BERT Serial Manuel utilisateur

Agilent Technologies

Agilent Technologies N3280A Manuel utilisateur

Vernier

Vernier Go Direct Voltage Manuel utilisateur

Lifeloc

Lifeloc R.A.D.A.R. Manuel utilisateur

Fluke

Fluke T5-600 Instructions d'utilisation et d'installation

Mercury

Mercury TSL01 Manuel utilisateur

MAHA

MAHA MBT Series Manuel utilisateur

Fuji Electric

Fuji Electric P-61 Manuel utilisateur

ETC

ETC SealerAtor Manuel utilisateur

Skyfine

Skyfine ETHYWAY V2 Manuel utilisateur

Appion

Appion G5 Twin Manuel utilisateur

PCB Piezotronics

PCB Piezotronics 8159-0112A Manuel utilisateur

BW Technologies

BW Technologies MicroDock II Manuel utilisateur

Sun Nuclear

Sun Nuclear 1027 Manuel utilisateur

Biomark

Biomark HPR LITE READER Manuel utilisateur

Hioki

Hioki 3169-20 Manuel utilisateur

Ashcroft

Ashcroft ATE-100 Manuel utilisateur