Kenwood NX-3220 Manuel utilisateur

NX-3200/ NX-3220

NX-3300/ NX-3320

VHF DIGITAL TRANSCEIVER

UHF DIGITAL TRANSCEIVER

USER GUIDE

This User Guide covers only the basic

operations of your radio. Ask your dealer for

information on any customized features they

may have added to your radio. For using

details User Manual, refer to the following URL.

http://manual.kenwood.com/en_contents/search/keyword

B5A-2073-00 (C)

THANK YOU

We are grateful you have chosen KENWOOD for your Digital

Transceiver applications.

CONTENTS

NOTICES TO THE USER ........................................................................................ 3

PRECAUTIONS ....................................................................................................... 4

UNPACKING AND CHECKING EQUIPMENT ...................................................... 11

SUPPLIED ACCESSORIES ................................................................................ 11

PREPARATION ..................................................................................................... 12

INSTALLING/ REMOVING THE (OPTIONAL) BATTERY PACK ......................... 12

INSTALLING/ REMOVING ALKALINE BATTERIES

(OPTIONAL BATTERY CASE) ............................................................................ 13

INSTALLING THE (OPTIONAL) ANTENNA ........................................................ 14

INSTALLING THE BELT CLIP ............................................................................. 14

INSTALLING THE CAP OVER THE UNIVERSAL CONNECTOR

<NX-3200/ NX-3300> .......................................................................................... 15

INSTALLING THE (OPTIONAL) SPEAKER/ MICROPHONE OR HEADSET

<NX-3200/ NX-3300> .......................................................................................... 15

INSTALLING THE CAP OVER THE SPEAKER/ MICROPHONE JACKS

<NX-3220/ NX-3320> .......................................................................................... 16

INSTALLING THE (OPTIONAL) SPEAKER/ MICROPHONE OR HEADSET

<NX-3220/ NX-3320> .......................................................................................... 16

ORIENTATION ...................................................................................................... 17

BUTTONS AND CONTROLS .............................................................................. 17

DISPLAY ............................................................................................................. 20

BASIC OPERATIONS ........................................................................................... 23

SWITCHING POWER ON/ OFF .......................................................................... 23

ADJUSTING THE VOLUME ................................................................................ 23

SELECTING A ZONE AND CHANNEL ............................................................... 23

TRANSMITTING ................................................................................................. 24

RECEIVING ......................................................................................................... 24

INFORMATION ON SOFTWARE LICENSE ......................................................... 25

NOTICES TO THE USER

●Government law prohibits the operation of unlicensed radio

transmitters within the territories under government control.

●Illegal operation is punishable by fine and/or imprisonment.

●Refer service to qualified technicians only.

Safety: It is important that the operator is aware of, and understands,

hazards common to the operation of any transceiver.

The AMBE+2™ voice coding Technology embodied in this product is

protected by intellectual property rights including patent rights, copyrights

and trade secrets of Digital Voice Systems, Inc. This voice coding

Technology is licensed solely for use within this Communications

Equipment. The user of this Technology is explicitly prohibited from

attempting to extract, remove, decompile, reverse engineer, or disassemble

the Object Code, or in any other way convert the Object Code into a human-

readable form. U.S. Patent Nos. #8,315,860, #8,595,002, #6,199,037,

#6,912,495, #8,200,497, #7,970,606 and #8,359,197

The Bluetooth® word mark and logo are registered trademarks owned by Bluetooth

SIG, Inc. and any use of such marks by JVC KENWOOD Corporation is under

license. Other trademarks and trade names are those of their respective owners.

Firmware Copyrights

The title to and ownership of copyrights for firmware embedded in KENWOOD

product memories are reserved for JVC KENWOOD Corporation.

PRECAUTIONS

●Do not charge the transceiver and battery pack when they are wet.

●Ensure that there are no metallic items located between the transceiver

and the battery pack.

●Do not use options not specified by KENWOOD.

●If the die-cast chassis or other transceiver part is damaged, do not

touch the damaged parts.

●If a headset or headphone is connected to the transceiver, reduce the

transceiver volume. Pay attention to the volume level when turning the

squelch off.

●Do not place the microphone cable around your neck while near

machinery that may catch the cable.

●Do not place the transceiver on unstable surfaces.

●Ensure that the end of the antenna does not touch your eyes.

●When the transceiver is used for transmission for many hours, the

radiator and chassis will become hot. Do not touch these locations

when replacing the battery pack.

●Always switch the transceiver power off before installing optional

accessories.

●When water gets into the microphone opening or the speaker grill, the

voice level may become incoherent or distorted. Lightly shake the

transceiver to remove the water from the speaker and/or microphone

before operating the transceiver.

●The charger is the device that disconnects the unit from the AC mains

line. The AC plug should be readily accessible.

●To dispose of batteries, be sure to comply with the laws and regulations

in your country or region.

WARNING

Turn the transceiver power off before entering the following

locations:

●Near explosives or blasting sites.

●In aircrafts. (Any use of the transceiver must follow the instructions

and regulations provided by the airline crew.)

●Where restrictions or warnings are posted regarding the use of

radio devices, including but not limited to medical facilities.

●Near persons wearing pacemakers.

●In explosive atmospheres (inflammable gas, dust particles, metallic

powders, grain powders, etc.).

●While pumping on fuel or while parked at gasoline service stations.

WARNING

●Do not remove the black sheet from the reverse side of the

transceiver (refer to the illustration below). Removal of this sheet

decreases the waterproof efficiency of the transceiver and may

cause malfunctions if water seeps into the transceiver.

CAUTION

●Do not disassemble or modify the transceiver for any reason.

●Do not place the transceiver on or near airbag equipment while the

vehicle is running. When the airbag inflates, the transceiver may be

ejected and strike the driver or passengers.

●Do not transmit while touching the antenna terminal or if any metallic

parts are exposed from the antenna covering. Transmitting at such

a time may result in a high-frequency burn.

●If an abnormal odor or smoke is detected coming from the

transceiver, switch the transceiver power off immediately, remove

the battery pack from the transceiver, and contact your KENWOOD

dealer.

●Use of the transceiver while you are driving may be against traffic

laws. Please check and observe the vehicle regulations in your

area.

●Do not expose the transceiver to extremely hot or cold conditions.

●Do not carry the battery pack (or battery case) with metal objects,

as they may short the battery terminals.

●Danger of explosion if the battery is incorrectly replaced; replace

only with the same type.

●When attaching a commercial strap to the transceiver, ensure that

the strap is durable. In addition, do not swing the transceiver around

by the strap; you may inadvertently strike and injure another person

with the transceiver.

●If a commercially available neck strap is used, take care not to let

the strap get caught on nearby machine.

●When operating the transceiver in areas where the air is dry, it is

easy to build up an electric charge (static electricity). When using

an earphone accessory in such conditions, it is possible for the

transceiver to send an electric shock through the earphone and to

your ear. We recommend you use only a speaker/microphone in

these conditions, to avoid electric shocks.

●Do not expose the transceiver to long periods of direct sunlight, nor

place it near heating appliances.

Information concerning the battery pack:

The battery pack includes flammable objects such as organic solvent.

Mishandling may cause the battery to rupture producing flames or

extreme heat, deteriorate, or cause other forms of damage to the battery.

Please observe the following prohibitive matters.

DANGER

●Do not disassemble or reconstruct the battery!

The battery pack has a safety function and protection circuit to avoid

danger. If they suffer serious damage, the battery may generate

heat or smoke, rupture, or burst into flame.

●Do not short-circuit the battery!

Do not join the + and – terminals using any form of metal (such as

a paper clip or wire). Do not carry or store the battery pack in

containers holding metal objects (such as wires, chain-necklaces

or hairpins). If the battery pack is short-circuited, excessive current

will flow and the battery may generate heat or smoke, rupture, or

burst into flame. It will also cause metal objects to heat up.

●Do not incinerate or apply heat to the battery!

If the insulator is melted, the gas release vent or safety function is

damaged, or the electrolyte is ignited, the battery may generate

heat or smoke, rupture, or burst into flame.

●Do not leave the battery near fires, stoves, or other heat

generators (areas reaching over 80°C/ 176°F)!

If the polymer separator is melted due to high temperature, an

internal short-circuit may occur in the individual cells and the battery

may generate heat or smoke, rupture, or burst into flame.

●Avoid immersing the battery in water or getting it wet by other

means!

If the battery becomes wet, wipe it off with a dry towel before use.

If the battery’s protection circuit is damaged, the battery may charge

at extreme current (or voltage) and an abnormal chemical reaction

may occur. The battery may generate heat or smoke, rupture, or

burst into flame.

DANGER

●Do not charge the battery near fire or under direct sunlight!

If the battery’s protection circuit is damaged, the battery may charge

at extreme current (or voltage) and an abnormal chemical reaction

may occur. The battery may generate heat or smoke, rupture, or

burst into flame.

●Use only the specified charger and observe charging

requirements!

If the battery is charged in unspecified conditions (under high

temperature over the regulated value, excessive high voltage or

current over regulated value, or with a remodeled charger), it may

overcharge or an abnormal chemical reaction may occur. The

battery may generate heat or smoke, rupture, or burst into flame.

●Do not pierce the battery with any object, strike it with an

instrument, or step on it!

This may break or deform the battery, causing a short-circuit. The

battery may generate heat or smoke, rupture, or burst into flame.

●Do not jar or throw the battery!

An impact may cause the battery to leak, generate heat or smoke,

rupture, and/or burst into flame. If the battery’s protection circuit is

damaged, the battery may charge at an abnormal current (or

voltage), and an abnormal chemical reaction may occur.

●Do not use the battery pack if it is damaged in any way!

The battery may generate heat or smoke, rupture, or burst into

flame.

●Do not solder directly onto the battery!

If the insulator is melted or the gas release vent or safety function

is damaged, the battery may generate heat or smoke, rupture, or

burst into flame.

●Do not reverse the battery polarity (and terminals)!

When charging a reversed battery, an abnormal chemical reaction

may occur. In some cases, an unexpected large amount of current

may flow upon discharging. The battery may generate heat or

smoke, rupture, or burst into flame.

DANGER

●Do not reverse-charge or reverse-connect the battery!

The battery pack has positive and negative poles. If the battery pack

does not smoothly connect with a charger or operating equipment,

do not force it; check the polarity of the battery. If the battery pack

is reverse-connected to the charger, it will be reverse-charged and

an abnormal chemical reaction may occur. The battery may

generate heat or smoke, rupture, or burst into flame.

●Do not touch a ruptured and leaking battery!

If the electrolyte liquid from the battery gets into your eyes, wash

your eyes with fresh water as soon as possible, without rubbing your

eyes. Go to the hospital immediately. If left untreated, it may cause

eye-problems.

WARNING

●Do not charge the battery for longer than the specified time!

If the battery pack has not finished charging even after the regulated

time has passed, stop it. The battery may generate heat or smoke,

rupture, or burst into flame.

●Do not place the battery pack into a microwave or high

pressure container!

The battery may generate heat or smoke, rupture, or burst into

flame.

●Keep ruptured and leaking battery packs away from fire!

If the battery pack is leaking (or the battery emits a bad odor),

immediately remove it from flammable areas. Electrolyte leaking

from battery can easily catch on fire and may cause the battery to

generate smoke or burst into flame.

●Do not use an abnormal battery!

If the battery pack emits a bad odor, appears to have color changes,

is deformed, or seems abnormal for any other reason, remove it

from the charger or operating equipment and do not use it. The

battery may generate heat or smoke, rupture, or burst into flame.

NOTIFICATION OF WATER-RESISTANT MODEL

Water Resistance and Maintenance

Water-Resistant Model transceiver conforms to the following standards.

IP67: The IP standard is the protection level specified by the international

standard IEC 60529. The first numeral indicates the “dust-resistant level”

and the second numeral indicates the “water-resistant” level.

Note:

●Initial water-resistant tests and procedures are performed products

upon being ordered from KENWOOD.

PRECAUTIONS

●The applicable standards listed above do not assure that the

transceiver can be used in water. The transceiver may be damaged in

a situation in which the maximum depth is over 1 meter or the maximum

submersion time exceeds 30 minutes.

●Observe the following precautions to maintain the transceiver’s water-

resistant performance:

a) Do not drop or apply strong physical shocks to the transceiver.

b) Do not disassemble or attempt to modify the transceiver. (If it is

disassembled or modified, its performance is not guaranteed.)

c) Do not soak the transceiver in water that contains a solvent or

surfactant, such as detergent or alcohol.

●If it is soaked in muddy water or salt water (including sea water), it may

become corroded. Immediately flush with fresh water and then wipe

dry with a soft cloth.

●If water is splashed onto the microphone, the battery, or the antenna

terminal, clean and dry them with a soft cloth before reconnecting to

the transceiver.

●When water gets into the microphone opening or the speaker grill, the

voice level may become low or distorted. Lightly shake the transceiver

to remove the water from the speaker and/or microphone before

operating the transceiver.

●Use of any option on the transceiver not specified by KENWOOD, may

reduce or void the water resistant and dust resistant performance.

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Kenwood Émetteur-récepteur

Kenwood

Kenwood TS-950SDX Manuel utilisateur

Kenwood

Kenwood TS-530S Manuel utilisateur

Kenwood

Kenwood TH-28A Manuel utilisateur

Kenwood

Kenwood TM-231A Manuel utilisateur

Kenwood

Kenwood ProTalk Digital TK-3401DE Manuel utilisateur

Kenwood

Kenwood TH-235A Manuel utilisateur

Kenwood

Kenwood TK-U100 Manuel utilisateur

Kenwood

Kenwood TKR-900 Manuel utilisateur

Kenwood

Kenwood TK-290 Manuel utilisateur

Kenwood

Kenwood TK-860G series Manuel utilisateur

Kenwood

Kenwood TR-7950 Manuel utilisateur

Kenwood

Kenwood TR-9130 Manuel utilisateur

Kenwood

Kenwood TS-50S Manuel utilisateur

Kenwood

Kenwood TK-2160 Manuel utilisateur

Kenwood

Kenwood TH-G71A Manuel utilisateur

Kenwood

Kenwood TK-3202 Manuel utilisateur

Kenwood

Kenwood TS-450S Manuel utilisateur

Kenwood

Kenwood TM-271A Manuel utilisateur

Kenwood

Kenwood TS-590SG Manuel utilisateur

Kenwood

Kenwood TK-2400 Manuel utilisateur

Kenwood

Kenwood TH-77A Manuel utilisateur

Kenwood

Kenwood TM-241A Manuel utilisateur

Kenwood

Kenwood TM-3530A Manuel utilisateur

Kenwood

Kenwood TS-50S Manuel utilisateur

Manuels Émetteur-récepteur populaires d'autres marques

Yaesu

Yaesu FT-7B Manuel utilisateur

Texas Instruments

Texas Instruments TLK10232 Manuel utilisateur

Mizuho

Mizuho MX-2 Guide produit

Blitz

Blitz MJ-398U Manuel utilisateur

Utilicom

Utilicom LongRanger 2050 Manuel utilisateur

Standart

Standart HX290UKA Manuel utilisateur

Altronix

Altronix Pace1PTM Manuel utilisateur

Kirisun

Kirisun PT2208 Manuel utilisateur

ELECRAFT

ELECRAFT KX2 Manuel utilisateur

Zodiac

Zodiac K3 Manuel utilisateur

Assa Abloy

Assa Abloy SecureComm HKC GSM-WIFI U Manuel utilisateur

Siemens

Siemens PSO 4000 Manuel utilisateur

Midland

Midland G8E-BT Manuel

ComNav

ComNav Mariner X2 Manuel utilisateur

Uniden

Uniden UH820 Series Manuel utilisateur

Standard Horizon

Standard Horizon HX320E Manuel utilisateur

Em-Trak

Em-Trak A100 Manuel utilisateur

HPE

HPE Aruba QSFP28 Manuel utilisateur