Kasda KW5226 Manuel utilisateur
KW5226 Wireless VDSL Router
User Manual
WLAN VDSL Gateway User Manual
NOTICE
This document contains proprietary information protected by copyright, and this Manual
and all the accompanying hardware, software, and documentation are copyrighted. All
rights are reserved. No part of this document may be photocopied or reproduced by
mechanical, electronic, or other means in any form.
The manufacturer does not warrant that the hardware will work properly in all
environments and applications, and makes no warranty or representation, either
expressed or implied, with respect to the quality, performance, merchantability, or
fitness for a particular purpose of the software or documentation. The manufacturer
reserves the right to make changes to the hardware, software, and documentation
without obligation to notify any person or organization of the revision or change.
All brand and product names are the trademarks of their respective owners.
© Copyright 2013
All rights reserved.
WLAN VDSL Gateway User Manual
1
Content
1 OVERVIEW..............................................................................................................................2
1.1 FEATURES .........................................................................................................................2
1.2 PACKET CONTENTS..........................................................................................................4
1.3 SYSTEM REQUIREMENTS..................................................................................................5
1.4 FACTORY DEFAULTS ........................................................................................................5
1.5 WARNINGS AND CAUTIONS...............................................................................................5
2HARDWARE DESCRIPTION.................................................................................................6
3HARDWARE INSTALLATION...............................................................................................8
4PC CONFIGURATION GUIDE.............................................................................................9
4.1 LOCAL PC CONFIGURATION IN WINDOWS 95, 98, ME, XP,7................................................9
4.2 LOCAL PC CONFIGURATION IN WINDOWS 2000...................................................................9
5 WEB-BASED MANAGEMENT GUIDE..................................................................................10
5.1 LANSETTING PAGE .........................................................................................................10
5.2 INTERNET ACCESS CONFIGURATION................................................................................ 10
5.3 WIRELESS SETTING .........................................................................................................28
5.4 MANAGEMENT................................................................................................................34
APPENDIX: FREQUENT ASKED QUESTIONS......................................................................40
WLAN VDSL Gateway User Manual
2
1 Overview
Thank you for choosing our product. The KW5226 is a Wireless VDSL router
combining an VDSL modem, an 802.11g wireless router, a 4-port switch, a printer
server host port, bringing high-speed wireless Internet connection to a home or office.
Features
1.1.1 Data rate
Downstream data rate up to 100 Mbps,
Upstream data rate up to 50Mbps
1.1.2 VDSL Compliant
ITU G.992.1 (G.DMT)
ITU G.993.2 (G.vdsl2) (Profile 8a, 8b, 8c, 8d, 12a,12b and 17a)
ITU G.992.2 (G.Lite)
ITU G.994.1 (G.hs)
ITU G.992.3 (G.DMT.BIS)
ITU G.992.4 (G.lite.bis)
ITU G.992.5
Compatible with all T1.413 issue 2 (full rate DMT over analog
POTS), and CO DSLAM equipment
TR69 compliant with ACS
1.1.3 Wireless
Fully IEEE 802.11b & IEEE 802.11g & IEEE 802.11n compatible.
Wireless data rate up to 300Mbps
Operating in the unlicensed 2.4 GHz ISM band
Multi SSID
Supports 64/128 bits WEP,WPA,WPA2,WPA/WPA2-PSK,802.1x
WLAN VDSL Gateway User Manual
3
1.1.4 Network Protocol & Features
Ethernet to ADSL Self-Learning Transparent Bridging
Internet Control Message Protocol (ICMP)
IP Static Routing
Routing Information Protocol (RIP, RIPv2)
Network Address Translation (NAT)
Virtual Server, Port Forwarding
Dynamic Host Configuration Protocol (DHCP)
DNS Relay, DDNS
IGMP Proxy
Simple Network Time Protocol (SNTP)
VPN pass-through (IPSec/PPTP/L2TP)
Parent control
1.1.5 ATM Capabilities
RFC 1483 Multi-protocol over ATM “Bridged Ethernet” compliant
RFC 2364 PPP over ATM compliant
RFC 2516 PPP over Ethernet compliant
ATM Forum UNI3.1/4.0 PVC - Up to 8 PVCs
VPI Range: 0-255 and VCI Range: 32-65535
UNI 3.0 & 3.1 Signaling
ATM AAL5 (Adaption Layer type 5)
OAM F4/F5
1.1.6 FIREWALL
Built-in NAT
MAC Filtering
WLAN VDSL Gateway User Manual
4
Packet Filtering
Stateful Packet Inspection (SPI)
Denial of Service Prevention (DoS)
DMZ
1.1.7 Management Support
Web Based GUI
Upgrade or update via FTP/HTTP
Command Line Interface via Telnet
Diagnostic Test
Firmware upgrade-able for future feature enhancement
1.1.8 Operating System Support
WINDOWS 98/SE/ME/2000/XP/VISTA/7
Macintosh
LINUX
1.1.9 Environmental
Operating humidity: 10%-90% non-condensing
Non-operating storage humidity: 5%-95% non-condensing
1.2 Packet Contents
The packet contents are as the following:
DSL ROUTER x 1
Power Adapter x 1
External Splitter x 1
Telephone Line x 2
Ethernet Cable x 1
Antenna x 2
Base x 1
CD x 1
WLAN VDSL Gateway User Manual
5
1.3 System Requirements
Before using this ROUTER, verify that you meet the following requirements:
Subscription for ADSL service. Your ADSL service provider should
provide you with at least one valid IP address (static assignment or
dynamic assignment via dial-up connection).
One or more computers, each contains an Ethernet 10/100M Base-T
network interface card (NIC).
A hub or switch, if you are connecting the device to more than one
computer.
For system configuration using the supplied web-based program: A web
browser such as Internet Explorer v5.0 or later, or Netscape v4.7 or
later.
1.4 Factory Defaults
The device is configured with the following factory defaults:
IP Address: 192.168.1.1
Subnet Mask: 255.255.255.0
Encapsulation: LLC/SNAP-BRIDGING or VC/MUx
VPI/VCI: According to local information
1.5 Warnings and Cautions
Never install telephone wiring during storm. Avoid using a telephone
during an electrical storm. There might be a risk of electric shock from
lightening.
Do not install telephone jacks in wet locations and never use the product
near water.
To prevent dangerous overloading of the power circuit, be careful about
the designed maximum power load ratings. Not to follow the rating
guideline could result in a dangerous situation.
Please note that telephone line on modem must adopt the primary line
that directly outputs from junction box. Do not connect Router to
extension phone. In addition, if your house developer divides a
telephone line to multi sockets inside the wall of house, please only use
the telephone that has connected with the splitter of ADSL Router when
you access the Internet. Under the above condition, if you also install
telephone with anti-cheat-dial device, please pull out this kind of
telephone, otherwise ADSL Router may occur frequently off-line.
WLAN VDSL Gateway User Manual
6
1 Hardware Description
Front Panel
Front Panel
LED
Color
Function
PWR
Green
On: Power on
Off: No power
LAN1,2,3,
4
Green
On: LAN link established and active via LAN
port
Blinking: DSL data activity occurs
Off: No LAN link via LAN port
WLAN
Green
On: The wireless module is ready and idle
Blinking: Data transmitting or receiving over
WLAN
Off: The wireless is not installed.
DSL1-2
Green
On: DSL link established and active
Quick blinking: DSL is trying to establish a
connection
Slow blinking: No DSL link
INET
Green
On: IP connected.
Blinking: IP connected and IP traffic is
passing through the device.
Off: DSL connnection not present.
WPS
Green
On: WPS connection is established
Blinking: Trying to establish a WPS
connection
Off: WPS function is off or no WPS
connection
WLAN VDSL Gateway User Manual
7
Rear panel
Side panel
WIFI button: Enable or disable wireless function.
WPS button: A convenient way for WPS set.
Reset: System reset to factory default
Port
Function
DSL1-2
Connect the device to an ADSL telephone jack or splitter
using a RJ-11 telephone cable
GE
Connect the device to user’s PC’s Ethernet port,or to the
uplink port on user’s hub/switch, using a RJ-45 cable
ETH1-4
Connect the device to your PC's Ethernet port, or to the
uplink port on user’s hub/switch, using a RJ-45 cable
ON/OFF
Switch it on or off
POWER
Connect to the supplied power adapter
USB
Connect the device to a Printer
WLAN VDSL Gateway User Manual
8
3 Hardware Installation
This chapter shows you how to connect Router. Meanwhile, it introduces the
appropriate environment for the Router and installation instructions.
1. Using a telephone line to connect the DSL port of ROUTER to the MODEM
port of the splitter, and using a other telephone line connect your telephone
to the PHONE port of the splitter, then connect the wall phone jack to the
LINE port of the splitter.
The splitter comes with three connectors as below:
LINE: Connects to a wall phone jack (RJ-11 jack)
MODEM: Connects to the DSL jack of ROUTER
PHONE: Connects to a telephone set
2. Using an Ethernet Cable to connect the LAN port of the ROUTER to your
LAN or a PC with network card installed.
3. Connect the power cable to the PWR connector on ROUTER, then plug in
the AC power adapter to the AC power outlet, and then press the on-off
button.
Notes: Without the splitter and certain situation, transient noise from
telephone can interfere with the operation of the Router, and the
Router may introduce noise to the telephone line. To prevent this
from happening, a small external splitter must be connected to
each telephone.
Table des matières
Autres manuels Kasda Routeur réseau
Kasda
Kasda KW5212H Manuel utilisateur
Kasda
Kasda LinkSmart KW6515 Manuel utilisateur
Kasda
Kasda KW55193 Manuel utilisateur
Kasda
Kasda KD318RI Manuel utilisateur
Kasda
Kasda KW 58283 Manuel utilisateur
Kasda
Kasda KW5863 Manuel utilisateur
Kasda
Kasda KD319MI Manuel utilisateur
Kasda
Kasda KA1750 Manuel utilisateur
Kasda
Kasda KW9522 Manuel utilisateur
Kasda
Kasda KD318EUI Manuel utilisateur
Manuels Routeur réseau populaires d'autres marques
NETGEAR
NETGEAR FS526T - Switch Manuel utilisateur
Korenix
Korenix JetNet 5710G Series Manuel utilisateur
Automated Logic
Automated Logic ZN551 Manuel du propriétaire
Cisco
Cisco ASR 1000 Series Manuel de l'opérateur
EnGenius
EnGenius ESR-9710 Manuel utilisateur
Cisco
Cisco 805 Series Instructions d'utilisation et de sécurité