Kärcher BDS 43/175 C Manuel utilisateur

MODELS:

BDS 43/175 C-10090710

BDS 51/175 C-10090720

BDS 51/175-300 C-10090700

FLOOR POLISHER

Operating Instructions (ENG)

86317790-B

04/09/09

IPX4

MACHINE DATA LOG/OVERVIEW

86317790 FLOOR POLISHER 12/18/08

Model:

Date of Purchase:

Serial Number:

Sales Representative:

Address:

Phone Number:

TABLE OF CONTENTS

86317790 FLOOR POLISHER 12/18/08

Machine Data Log.............................2

Table of Contents..............................3

HOW TO USE THIS MANUAL

How to use this Manual.....................1-1

SAFETY

Important Safety Instructions............2-1

Hazard Intensity Level. .....................2-2

Grounding Instructions 120V. ...........2-3

Safety Label Location .......................2-4

OPERATION

Technical Specifications ...................3-1

Handle Installation ............................3-2

Controls.............................................3-3

Handle Adjustment............................3-3

Machine Operation............................3-4

Pad Driver Installation.......................3-4

MAINTENANCE

Scrub Brush/Pads.............................4-1

Machine Troubleshooting..................4-2

GROUP PARTS LIST

Brush/Pad Driver Group....................5-1

Electrical – 120v................................5-3

Deck..................................................5-5

Handle...............................................5-7

Motor.................................................5-9

Wiring-120V......................................5-11

Suggested Spare Parts.....................5-12

HOW TO USE THIS MANUAL

86317790 FLOOR POLISHER 12/18/08

1-1

This manual contains the following sections:

-HOW TO USE THIS MANUAL

-SAFETY

-OPERATIONS

-MAINTENANCE

-PARTS LIST

The HOW TO USE THIS MANUAL section will tell

you how to find important information for ordering

correct repair parts.

Parts may be ordered from authorized dealers.

When placing an order for parts, the machine

model and machine serial number are important.

Refer to the MACHINE DATA box which is filled

out during the installation of your machine. The

MACHINE DATA box is located on the inside of

the front cover of this manual.

The SAFETY section contains important

information regarding hazard or unsafe practices

of the machine. Levels of hazards are identified

that could result in product or personal injury, or

severe injury resulting in death.

The OPERATIONS section is to familiarize the

operator with the operation and function of the

machine.

The MAINTENANCE section contains preventive

maintenance to keep the machine and its

components in good working condition. They are

listed in this general order:

The PARTS LIST section contains assembled

parts illustrations and corresponding parts list. The

parts lists include a number of columns of

information:

-REF – column refers to the reference

number on the parts illustration.

-PART NO. – column lists the part

number for the part.

-PRV NO. - Reference No.

-QTY – column lists the quantity of the

part used in that area of the machine.

-DESCRIPTION – column is a brief

description of the part.

-SERIAL NO. FROM – If this column

has an (*) and a Reference number,

see the SERIAL NUMBERS page in

the back of your manual. If column

has two asterisk (**), call manufacturer

for serial number. The serial number

indicates the first machine the part

number is applicable to. The main

illustration shows the most current

design of the machine. When a boxed

illustration is shown, it displays the

older design.

-NOTES – column for information not

noted by the other columns.

NOTE: If a service or option kit is installed on your

machine, be sure to keep the KIT INSTRUCTIONS

which came with the kit. It contains replacement

parts numbers needed for ordering future parts.

NOTE: The number on the lower left corner of the

front cover is the part number for this manual.

SAFETY

86317790 FLOOR POLISHER 12/18/08 2-1

IMPORTANT SAFETY INSTRUCTIONS

When using an electrical appliance, basic precaution

must always be followed, including the following:

READ ALL INSTRUCTIONS BEFORE USING THIS MACHINE.

To reduce the risk of fire, electric shock, or injury:

Use only indoors. Do not use outdoors or expose to rain.

Use only as described in this manual. Use only manufacturer’s recommended components and attachments.

If the machine is not working properly, has been dropped, damaged, left outdoors, or dropped into water,

return it to an authorized service center.

Do not operate the machine with any openings blocked. Keep openings free of debris that may reduce

airflow.

Machine can cause a fire when operating near flammable vapors or materials. Do not operate this machine

near flammable fluids, dust or vapors.

This machine is suitable for commercial use, for example in hotels, schools, hospitals, factories,

shops and offices for more than normal housekeeping purposes.

Maintenance and repairs must be done by qualified personnel.

During operation, attention shall be paid to other persons, especially children.

The machine shall only be operated by instructed and authorized persons.

When leaving unattended, unplug the machine.

Do not handle the plug or machine with wet hands.

Do not unplug machine by pulling on cord. To unplug, grasp the plug, not the cord.

Do not use with damaged cord or plug. Follow all instructions in this manual concerning grounding the

machine.

Do not pull or carry by cord, use cord as a handle, close a door on cord, or pull cord around sharp edges or

corners.

Do not pull/run machine over cord. Keep cord away from heated surfaces.

Connect to a properly grounded outlet. See Grounding Instructions.

SAVE THESE INSTRUCTIONS

SAFETY

86317790 FLOOR POLISHER 12/18/08

The following symbols are used throughout this guide as indicated in their descriptions:

HAZARD INTENSITY LEVEL

There are three levels of hazard intensity identified by signal words – WARNING and CAUTION and

FOR SAFTEY. The level of hazard intensity is determined by the following definitions:

WARNING – Hazards or unsafe practices which COULD result in severe

personal injury or death.

CAUTION – Hazards or unsafe practices which could result in minor personal

injury or product or property damage.

FOR SAFETY: To identify actions which must be followed for safe operation of equipment.

Report machine damage or faulty operation immediately. Do not use the machine if it is not in proper

operating condition. Following is information that signals some potentially dangerous conditions to the

operator or equipment. Read this information carefully. Know when these conditions can exist. Locate

all safety devices on the devices on the machine. Please take the necessary steps to train the machine

operating personnel.

FOR SAFETY:

DO NOT OPERATE MACHINE:

Unless Trained and Authorized.

Unless Operation Guide is Read and Understood.

In Flammable or Explosive areas.

In areas with possible falling objects.

WHEN SERVICING MACHINE:

Avoid moving parts. Do not wear loose fitting clothing, jackets, shirts, or sleeves when working

on the machine. Use approved replacement parts.

SAFETY

86317790 FLOOR POLISHER 12/18/08

GROUNDING INSTUCTIONS-120V

THIS PRODUCT IS FOR COMMERCIAL USE

ONLY.

ELECTRICAL:

In the USA this machine operates on a one 15

amp nominal 120V, 60 hz, A.C. power circuit. The

amp, hertz, and voltage are listed on the data label

found on each machine. Using voltages above or

below those indicated on the data label will cause

serious damage to the motors.

GROUNDING INSTRUCTIONS:

This appliance must be grounded. If it should

malfunction or break down, grounding provides a

path of least resistance for electric current to

reduce the risk of electric shock. This appliance is

equipped with a cord having an equipment-

grounding conductor and grounding plug. The

plug must be inserted into an appropriate outlet

that is properly installed and grounded in

accordance with all local codes and ordinances.

This appliance is for use on a nominal 120-volt

circuit, and has a grounded plug that looks like the

plug in “Fig. A”. A temporary adaptor that looks

like the adaptor in “Fig . C” may be used to

connect this plug to a 2-pole receptacle as shown

in “Fig. B”, if a properly grounded outlet is not

available. The temporary adaptor should be used

only until a properly grounded outlet (Fig. A) can

be installed by a qualified electrician. The green

colored rigid ear, lug, or the like extending from

the adaptor must be connected to a permanent

ground such as a properly grounded outlet box

cover. Whenever the adaptor is used, it must be

held in place by a metal screw.

Improper connection of the equipment-

grounding conductor can result in a risk of

electric shock. Check with a qualified

electrician or service person if you are in doubt

as to whether the outlet is properly grounded.

Do not modify the plug provided with the

appliance - if it will not fit the outlet, have a

proper outlet installed by a qualified

electrician.

USING AN ADAPTOR

GROUNDING CONNECTION

Note: Ada

tors are not allowed in Canada.

Outlet

Tab for Grounding Outlet Box

FIGURE C

Grounded

FIGURE A

Adaptor

Screw FIGURE B

Adaptor

Metal Screw

Grounded

Grounding Pin

SAFETY

86317790 FLOOR POLISHER 12/18/08

SAFETY LABEL LOCATION

NOTE: These drawings indicate the location of safety labels on the Machine. If, at any time,

the labels become illegible contact your authorized representative for prompt replacement.

WARNING LABEL

P/N 86219740

PRV NO. 500194

NOTES:

86317790 FLOOR POLISHER 12/18/08 2-

TECHNICAL SPECIFICATIONS

86317790 FLOOR POLISHER 12/18/08

ITEM DIMENSION/CAPACITY/MODEL

CONSTRUCTION Heavy-duty die cast aluminum deck with heavy-

duty rubber bumper, tubular steel adjustable

handle with die cast aluminum handle housing

MOTOR

1.5HP 115V induction BDS 43/175 C, BDS 51/175 C

1.75 HP 115V 175/300RPM BDS 51/175-300C

BRUSH/PAD SPEED

175 rpm BDS 43/175 C, BDS 51/175 C

175/300 rpm BDS 51/175-300C

ELECTRICAL SYSTEM

115 volts, 60 Hz

CABLE

50’ (15 m), 14/3, built in cord wrap

SWITCHES Dual levers with safety lock

WHEELS Two 5” (12.7 cm) dia., 1.25” (3 cm) wide, non-

marking tread

HANDLE 1.5” (4 cm) tubular steel, adjustable, easy to use

thumb activated safety lock

DIMENSIONS (L X W X H)

13” (33 cm) model 21.0” (53 cm) x 14” (36 cm) x 47” (119 cm)

15” (38 cm) model 22.0” (56 cm) x 16” (41 cm) x 47” (119 cm)

17” (43 cm) model 23.0” (58 cm) x 18” (46 cm) x 47” (119 cm)

20” (51 cm) model 24.5” (62 cm) x 21” (53 cm) x 47” (119 cm)

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Kärcher Machine de plancher

Kärcher

Kärcher BDS 43/150 C Classic Manuel utilisateur

Kärcher

Kärcher KM 130/300 R Bp Manuel utilisateur

Kärcher

Kärcher B 110 R Manuel utilisateur

Kärcher

Kärcher BR 40/25 EP Bp Manuel utilisateur

Kärcher

Kärcher BR 30/4 C Manuel utilisateur

Kärcher

Kärcher 2000 Series Manuel utilisateur

Kärcher

Kärcher BD 50/50 C Bp Pad Wet Manuel utilisateur

Kärcher

Kärcher BR 530 Manuel utilisateur

Kärcher

Kärcher KM 35/5 C Manuel utilisateur

Kärcher

Kärcher BR VS 400 USA Manuel utilisateur

Kärcher

Kärcher FP 306 Manuel utilisateur

Kärcher

Kärcher B 40 C Bp Manuel utilisateur

Kärcher

Kärcher 1.186-124.0 Manuel utilisateur

Kärcher

Kärcher KM 75 W G Manuel utilisateur

Kärcher

Kärcher HDS 6/14 C Manuel utilisateur

Kärcher

Kärcher K 70/30 Bp Pack Adv. Manuel utilisateur

Kärcher

Kärcher B 90 R Manuel utilisateur

Kärcher

Kärcher Tornado BR 4735 ESC Manuel utilisateur

Kärcher

Kärcher B 140 R Manuel utilisateur

Kärcher

Kärcher BR 45/22 C Manuel utilisateur

Kärcher

Kärcher PUZZI 50/35 Manuel utilisateur

Kärcher

Kärcher PUZZI 50/14E Manuel utilisateur

Kärcher

Kärcher CVS 65/1 Bp Manuel utilisateur

Kärcher

Kärcher FC 7 Cordless Manuel utilisateur

Manuels Machine de plancher populaires d'autres marques

Nilfisk-Advance

Nilfisk-Advance Advance SC370 17B Manuel utilisateur

Numatic

Numatic ET 4045 Manuel utilisateur

HAWK ENTERPRISES

HAWK ENTERPRISES HP1513-180BRUTE Manuel utilisateur

Mytee

Mytee 8070 Mytee-Lite Manuel utilisateur

Kärcher

Kärcher B 140 R Manuel utilisateur

Triple S

Triple S Ace 26T1 Manuel utilisateur

Nilfisk-Advance

Nilfisk-Advance SW 750 Manuel utilisateur

Tornado

Tornado Marathon 2000 98190 Manuel

Windsor

Windsor ADMIRAL Admiral 8 Manuel utilisateur

Numatic

Numatic TTB 1117/100 Manuel utilisateur

Tennant

Tennant 8210D Manuel utilisateur

Nobles

Nobles Frontier Manuel du produit

lavina

lavina 21-X Manuel utilisateur

KENT

KENT Edge 28B Manuel utilisateur

Tennant

Tennant 215 Manuel du produit

Windsor

Windsor BDP 51/2000C Manuel utilisateur

CleanFreak

CleanFreak DURA-18HD Manuel utilisateur

Nilfisk-Advance

Nilfisk-Advance Warrior 34RST Guide de l'administrateur