König Electronic CMP-PRESENT20 Manuel utilisateur
CMP-PRESENT20
WIRELESS PRESENTER
WITH LASER POINTER
MANUAL
ENGLISH
1
FEATURES:
- Class II laser pointer
- Infrared remote control for computer presentation
- Support Microsoft powerpoint, works on OS
Windows 98 or latest version
- Power by:DC 3V, 2x1.5V
CONTROLS:
1) Battery compartment cover
2) Laser beam button
3) Page down button
4) Page up button
5) Laser Output aperture
6) Infrared receiver USB (to computer)
2
BATTERY INSTALLATION:
- The unit powered by 2 x 1.5V batteries
- Remove the battery compartment cover ( 1 ) by
unscrewing the cover.
- Insert 2 x 1.5V batteries into the battery holder.
Note: - Make sure tat the + & -
Polarities are respected
- Do not mix old and new batteries
- Do not mix alkaline or silver-oxide batteries
- Put the battery compartment cover ( 1 ) back in
position
LASER POINTER OPERATION:
Simply press the laser beam button ( 2 ) to activate
the laser pointer; laser beam will emit directly from
the Laser output aperture ( 5 )
Release the laser beam button ( 2 ) to turn off the
laser pointer.
CAUTIONS:
Avoid direct eye exposure.
DO NOT LOOK DIRECTLY INTO THE LASER BEAM
OUTPUT APERTURE DURING OPERATION!!
Be aware that laser light, when reflected off mirror-like
surface, can also be dangerous.
Keep out of reach of children.
INFRARED FUNCTION:
Connect the infrared receiver to the USB port of your
computer and the computer will select the USB
interface.
3
The sensitivity of the remote control can be adjusted.
Settings can be done on the CONTROL PANEL of
your computer.
1) Go to control panel page,
2) Select keyboard,
3) Change the sensitivity in Repeat delay by
control bar,
4) Click OK when finished.
In Microsoft Powerpoint working page, press the page
up button ( 4 ) & the next page down button ( 3 ) to
scroll the pages.
SPECIFICATION:
Operating voltage: 3V
Battery: N size, DC 1.5V x 2pcs
Operation time: 4 hours
Transmission distance: 5 meter
View angle: 30°
Laser wave length: 645-655nM
Laser output: Class II <1mW meet CE st.
Diameter & length: Ø 18mm, 145mm
Receiver modular plug: USB 1.1 compliant
Operation current(laser) <40mA
Designs and specifications are subject to change
without a notice.
No guarantee or liability can be accepted for any
changes and modifications of the product or damage
caused due to incorrect use of this product.
WWW.KONIGCOMPUTER.COM
Table des matières
Autres manuels König Electronic Présentateur numérique
Manuels Présentateur numérique populaires d'autres marques
Samsung
Samsung SDP-850 Manuel utilisateur
Dukane
Dukane DV-P303A Manuel utilisateur
RemotePoint
RemotePoint Presenter Global Manuel utilisateur
Kensington
Kensington Wireless Presenter with Laser Pointer Mode d'emploi
NEC
NEC DS1-MP10RX2 Manuel d'utilisation
Logitech
Logitech R800 - Professional Presenter Presentation Remote... Manuel utilisateur