K-array K-WALL2L Manuel utilisateur
K-WALL2L rev. A
K-WALL2L
USER GUIDE
English
K-WALL2L rev. A
2
TABLE OF CONTENTS
1. K-WALL2L
1.1 Packaging....................................................................................................................3
1.2 Safety Precautions......................................................................................................3
2. PSYSICAL........................................................................................................... .4
3. INTRODUCTION.................. ................................................................................ .4
4. ASSEMBLY ...................................................................................................... .5
4.1 Configuration Assemby 1...............................................................................................5
4.2 Configuration Assemby 2..............................................................................................6
5.DIMENSIONS ..................................................................................................... .8
6.DECLARATION OF CONFORMITY.......................................................................................9
K-WALL2L rev. A
3
1.1 PACKAGING
Please verify the shipment for completeness and proper condition of the items.
ID Description Q.ty
1Wall Bracket 1
2Rotation Pivot 1
3Speaker Bracket 1
4M8 x 25 Botton Head Hex
Socket Screw 1
5M8 Washer 1
6M5 x 12 Botton Head Hex
Socket Screw 1
1.2 SAFETY PRECAUTIONS
Installation and setup should only be carried out by qualified personal.
It is the responibility of the person installing the assembly to ensure that the suspension/fixing points
are suitable for the intended use.
Always carry out a visual and funcional inspection of the items before use. In case there is any doubt
as to the proper functioning and safety of the items, these must be withdrawn from use immediately.
Only use mounting parts (fixing anchors and screw) that are suitable for the intended application.
Before mounting the K-WALL2L on any K-array speaker, please read carefully the speaker’s User
Guide for checking the fixing points and the available configurations.
K-WALL2L rev. A
4
2. PHYSICAL
Weight: 0,6 kg (1,3 lb)
K-WALL2L rev. A
5
3. INTRODUCTION
K-WALL2L accessory is a bracket used to hang several K-array speakers on the wall.
The two brackets can be mounted with two different configurations, as shown in the pictures below:
Configuration 1 Configuration 2
First configuration has an excurtion
range between wall and speaker
from 45mm to a 65 mm.
Second configuration the device
will have a fixed location with the
advantage of a greatly reduced
distance from the wall suspension
NOTE: The KK52 Speaker shown in these pages is use for illustrative purposes. Please
refer to your speaker’s user guide for checking the fixing points and the available
configurations.
K-WALL2L rev. A
6
4.1 CONFIGURATION ASSEMBLY 1
You will find the K-WALL2L mounted in the packaging box. Follow the below instructions for
assembling the device.
1. Unscrew the two body brackets.
2. Combine the two body brackets.
K-WALL2L rev. A
7
3. Position the K-array speaker and make sure to turn the clamping screw.
4.2 CONFIGURATION ASSEMBLY 2
1. Unscrew the two body bracketws.
WARNING
Before Installation, please read carrefully yuor speaker’s user guide
downloadble from our website www.K-array.com
K-WALL2L rev. A
8
2. If there isn’t a regulation needed, rotate 180° the speaker bracket.
3. Position the K-array speaker and make sure to turn the clamping screw.
K-WALL2L rev. A
9
5. WALL GUIDE
TEMPLATE
Wall Fixing Point
Wall Fixing Point
DECLARATION OF CONFORMITY
Manufacturer/Importer: K-array s.u.r.l.
Brand: K-ARRAY
Address: via Paolina Romagnoli 17 50037 S. Piero a Sieve Firenze ITALY
Date of Issue: 14 / 03 / 12
Model Code: K-KWALL2L
Declaration: Complies with safety essential requirements of Council Directive
2006/42/EC on the approximation of the Laws of the Member States relating to lifting of
groups of Cases.
This declaration applies to all specimens manufactured in accordance with the attached
manufacturing drawings which form part of this declaration. Assessment of compliance
of the product with the requirements was based on the following standards:
EN 13155:2009
Marking:
Applying Year: 2012
Applied by: K-array s.u.r.l.
Via Paolina Romagnoli 17
50037 S. Piero a Sieve
Firenze Italy
Tel. +39 055 8487222
Fax +39 055 8487238
Signed by: Franco Spataro
Technical Manager
K-array
s.r.l. a socio unico società soggetta alla attività di direzione e coordinamento di HP Sound Equipment srl
P. IVA / VAT / CF
06206990480 - R.E.A. 609589 Cap. soc. i.v. € 100.000,00
Sede legale: via Paolina Romagnoli 50037 San Piero a Sieve - Firenze - ITALY
tel +39 055 8487222 fax +39 055 8487238
[email protected] www.k-array.com
K-WALL2L rev. A
10
The contents of this manual are furnished for informational purposes only. K-array s.u.r.l. assumes no responsibility for any errors or inaccuracies that may
appear in this manual. K-array s.u.r.l. reserves the right to make modifications without prior notice.
6. DECLARATION OF CONFORMITY
Table des matières
