Juniper ACX4000 Manuel utilisateur

ACX4000 Universal Metro Routers

Quick Start

January 2015

Part Number: 530-062129

Revision 01

This document describes how to install the Juniper Networks®ACX4000 Universal Metro Router.

Contents ACX4000 Quick Start Description | 3

Step 1: Prepare the Site for ACX4000 Router Installation | 5

Step 2: Install the Router | 7

Tools Required to Install the Router in a Rack | 7

Install the Mounting Brackets | 7

Install the ACX4000 Router in the Rack | 8

Step 3: Ground the ACX4000 Router | 10

Tools Required to Ground the ACX4000 Router | 10

Connect the Grounding Cable | 10

Step 4: Connect External Devices and Cables | 13

Tools Required to Connect External Devices and Cables | 13

Connect the ACX4000 Router to a Network for Out-of-Band Management | 13

Connect the ACX4000 Gateway to a Management Console or Auxiliary Device | 14

Connect Network Interface Cables to the ACX4000 Router | 14

Step 5: Connect Power to the ACX Series Router | 16

Connect AC Power to an AC-Powered ACX4000 Router | 16

Connect DC Power to a DC-Powered ACX4000 Router | 17

Step 6: Perform Initial Software Configuration | 21

Enter Configuration Mode | 21

Configure User Accounts and Passwords | 22

Configure System Attributes | 22

Commit the Configuration | 23

Safety Warnings | 25

Compliance Statements for NEBS | 26

Compliance Statements for EMC Requirements | 27

Canada | 27

European Community | 27

Israel | 28

Japan | 28

United States | 28

Junos OS Documentation and Release Notes | 29

Requesting Technical Support | 29

Self-Help Online Tools and Resources | 29

Creating a Service Request with JTAC | 30

Revision History | 30

ACX4000 Quick Start Description

This Quick Start contains information you need to install and configure the router quickly. For complete

installation instructions, see the ACX4000 Universal Access Routers Hardware Guide at

https://www.juniper.net/documentation/.

WARNING: This Quick Start contains a summary of safety warnings in “Safety Warnings”

on page 25. For a complete list of warnings for this router, including translations, see the

ACX4000 Universal Access Routers Hardware Guide at

https://www.juniper.net/documentation/.

The ACX Universal Metro Router is principally designed for high-density access and pre-aggregation and

is environmentally hardened. The router can be used as a cell site router or pre-aggregation device for

mobile backhaul and a CPE for business or residential access.

The ACX Series routers support TDM, Gigabit Ethernet, and 10-Gigabit Ethernet interfaces. The chassis

has eight built-in Gigabit Ethernet combination copper or fiber interfaces with PoE+ (65 W) support on

two ports, two Gigabit Ethernet SFP ports, and two 10-Gigabit Ethernet SFP+ ports. The router also has

two slots for modular interface cards (MICs). For a list of the supported MICs, see the ACX4000 Universal

Metro Router MIC Guide.

The ACX Series router is a single-board router with a built-in Routing Engine and one Packet Forwarding

Engine that has two Flexible PIC Concentrators (shown in the CLI as FPC 0 and FPC 1). Because there is

no switching fabric, the single Packet Forwarding Engine takes care of packet forwarding:

•Routing Engine—Provides Layer 3 routing services and network management.

•Packet Forwarding Engine—Performs Layer 2 and Layer 3 packet switching, route lookups, and packet

forwarding.

The ACX Series router is powered by Junos OS, supporting extensive L2 and L3 features, IP/MPLS with

traffic engineering, rich network management, fault management, service monitoring and Operation,

Administration, and Maintenance (OAM) capabilities, and an open software development kit (SDK) system

that allows providers to customize and integrate operations with their own management systems. For a

list of related Junos OS documentation, see https://www.juniper.net/documentation/software/junos/.

As part of the mobile backhaul, the ACX Series router at the cell site and the MX Series router at the

aggregation layer provide comprehensive end-to-end Ethernet, MPLS, and OAM features with the one

Junos OS running on both platforms.

The compact routers are 2.5 rack units (U; that is, 4.375 in., or 11.11 cm) tall. Several routers can be stacked

in a single floor-to-ceiling rack for increased port density per unit of floor space.

The chassis is a rigid sheet metal structure that houses all the other router components. The chassis

measures 4.375 in. (11.11 cm) high, 9.5 in. (24.13 cm) deep, and 17.5 in. (44.5 cm) wide. The outer edges

of the mounting brackets extend the width to 19 in. (48 cm) (from the front-mounting brackets to the rear

of the chassis). The chassis installs in standard 300-mm deep (or larger) enclosed cabinets, 19-in. equipment

racks, or telco open-frame racks.

Figure 1 on page 4 shows the front panel of the ACX4000 router.

Figure 1: Front View of the ACX4000 Router

g006502

716 89101112131415 6

9—1—Alarm input and output contactsESD point

10—2—1-PPS and 10-MHz GPS input and output portsMIC slots

11—3—External reference clocking portCombination ports: Gigabit Ethernet RJ-45 ports or

Gigabit Ethernet SFP ports

12—4—Console or auxiliary portPower over Ethernet (PoE) ports

13—5—Management portFan module

14—6—System status LEDGrounding terminals

15—7—USB portsTen-Gigabit Ethernet SFP+ ports

16—8—Power suppliesGigabit Ethernet SFP ports

Step 1: Prepare the Site for ACX4000 Router

Installation

Prepare your site for ACX4000 installation by observing the following guidelines:

•You can install the router in a four-post rack or cabinet or an open-frame rack.

•The rack rails must be spaced widely enough to accommodate the chassis's external dimensions: 4.375 in.

(11.11 cm) high, 9.4 in. (24 cm) deep, and 17.5 in. (44 cm) wide. The outer edges of the mounting brackets

extend the width to 19.2 in. (48.7 cm).

•One person must be available to lift the router while another secures the router to the rack.

•The rack must be strong enough to support the weight of the fully configured router, up to 22.48 lb

(10.2 kg).

•For service personnel to remove and install hardware components, allow at least 2.16 in. (5.5 cm) in

front of the router.

•The rack or cabinet must have an adequate supply of cooling air.

•Ensure that the cabinet allows the chassis hot exhaust air to exit from the cabinet without recirculating

into the router.

•When installing the router in a cabinet, ensure that the bottom of the cabinet is closed and there is no

opening.

•The router must be installed into a rack that is secured to the building structure.

•Mount the router at the bottom of the rack if it is the only unit in the rack.

•When mounting the router in a partially filled rack, load the rack from the bottom to the top with the

heaviest component at the bottom of the rack.

•Install the router only in restricted areas, such as dedicated equipment rooms and equipment closets, in

accordance with Articles 110-16, 110-17, and 110-18 of the National Electrical Code, ANSI/NFPA 70.

Figure 2: ACX4000 Rack Clearance and Chassis Dimensions

Rear

Front 17.32"

(44 cm)

9.25"

(23.5 cm)

g006536

Front-mounting flange

17.48"

(44.4 cm)

6" (15.24 cm)

clearance required

for maintenance

.75" (2 cm)

clearance required

for free airflow

3" (7.6 cm)

Step 2: Install the Router

IN THIS SECTION

Tools Required to Install the Router in a Rack | 7

Install the Mounting Brackets | 7

Install the ACX4000 Router in the Rack | 8

Tools Required to Install the Router in a Rack

To install the router in a rack, you need the following tools:

•Phillips (+) screwdriver, number 2

•ESD grounding wrist strap

Install the Mounting Brackets

Two mounting brackets for front mounting ship with the router (see Figure 3 on page 8).

Attach both mounting brackets to the front of the chassis:

1. Align the bracket with the three sets of mounting holes.

2. Insert the six screws at the top, middle, and bottom of the bracket and tighten each partially.

3. Tighten the four screws completely.

4. Repeat the procedure for the other bracket.

Figure 3: Installing the Mounting Brackets to the Front of the ACX4000 Router

g006537

Install the ACX4000 Router in the Rack

The router can be installed horizontally in a rack or cabinet.

Two people are required to install the ACX4000 router. The chassis weighs approximately 22.48 lb (10.2

kg). To install the chassis (see Figure 4 on page 9):

1. Ensure that the rack is in its permanent location and is secured to the building. Ensure that the installation

site allows adequate clearance for both airflow and maintenance.

2. Position the router in front of the rack or cabinet.

3. Have one person grasp both sides of the router, lift the router, and position it in the rack, aligning the

mounting bracket holes with the threaded holes in the rack rails. Make sure the chassis is level.

4. Have the second person install a mounting screw into each of the open mounting holes aligned with

the rack, starting from the bottom.

5. Visually inspect the alignment of the router. If the router is installed properly in the rack, all the mounting

screws on one side of the rack should be aligned with the mounting screws on the opposite side, and

the router should be level.

Figure 4: Install the Front-Mounted Router in the Rack

g006539

3—1—Mounting screwsRack

2—ACX4000 router

Step 3: Ground the ACX4000 Router

IN THIS SECTION

Tools Required to Ground the ACX4000 Router | 10

Connect the Grounding Cable | 10

You must ground the router before connecting power.

Tools Required to Ground the ACX4000 Router

To ground the router, you need the following tools:

•Phillips (+) screwdriver, number 2

•ESD grounding wrist strap

•Two SAE 10-32 screws and paint piercing washers (not provided)

•Grounding lug, Panduit LCD06-10-A or equivalent (not provided)

•Grounding cable, minimum 6 AWG (13.3 mm2) 90° C wire (not provided)

Connect the Grounding Cable

You ground the router by connecting a grounding cable to earth ground and then attaching it to the chassis

grounding points. To ground the router:

1. Verify that a licensed electrician has attached the cable lug provided with the router to the grounding

cable.

2. Attach an electrostatic discharge (ESD) grounding strap to your bare wrist, and connect the strap to

an approved site ESD grounding point. See the instructions for your site.

3. Ensure that all grounding surfaces are clean and brought to a bright finish before grounding connections

are made.

Autres manuels pour ACX4000

Table des matières

Autres manuels Juniper Routeur réseau

Juniper

Juniper M10i Instructions d'installation

Juniper

Juniper JCS 1200 Manuel utilisateur

Juniper

Juniper ACX2000 Manuel utilisateur

Juniper

Juniper T640 Instructions d'installation

Juniper

Juniper NFX150-C-S1 Manuel utilisateur

Juniper

Juniper MX960 Manuel utilisateur

Juniper

Juniper ACX1000 Manuel utilisateur

Juniper

Juniper MX204 Manuel utilisateur

Juniper

Juniper ACX2200 Manuel utilisateur

Juniper

Juniper T320 Manuel utilisateur

Juniper

Juniper M7i Manuel utilisateur

Juniper

Juniper MX240 Instructions d'installation

Juniper

Juniper M10 Instructions d'installation

Juniper

Juniper EX2500 Manuel utilisateur

Juniper

Juniper ACX7100-32C Instructions d'installation

Juniper

Juniper 6rd Manuel utilisateur

Juniper

Juniper PTX1000 Instructions d'installation

Juniper

Juniper MX480 Instructions d'installation

Juniper

Juniper PTX10016 Manuel utilisateur

Juniper

Juniper E-Series Instructions d'installation

Juniper

Juniper MX240 Instructions d'installation

Juniper

Juniper T4000 - Instructions d'installation

Juniper

Juniper J-Series Manuel utilisateur

Juniper

Juniper AP45 Manuel

Manuels Routeur réseau populaires d'autres marques

Allnet

Allnet ALL0333AU Manuel utilisateur

HomeSeer

HomeSeer HT-SEL Manuel utilisateur

Sercomm

Sercomm Genesis OC3505D Manuel utilisateur

Billion

Billion BIPAC 5102 Series Manuel utilisateur

TP-Link

TP-Link TD-8817 Manuel utilisateur

Motorola

Motorola MR1900 Manuel utilisateur

Digi

Digi IX14 Manuel utilisateur

Cisco

Cisco NCS 540 Manuel

XAVi

XAVi X8821e Manuel utilisateur

BEC

BEC 6200WZL Manuel utilisateur

MikroTik

MikroTik hAP ac3 Series Manuel utilisateur

Korenix

Korenix JetNet 5428G Series Manuel utilisateur

NETGEAR

NETGEAR FS526T - Switch Manuel utilisateur

Korenix

Korenix JetNet 5710G Series Manuel utilisateur

Automated Logic

Automated Logic ZN551 Manuel du propriétaire

Cisco

Cisco ASR 1000 Series Manuel de l'opérateur

EnGenius

EnGenius ESR-9710 Manuel utilisateur

Cisco

Cisco 805 Series Instructions d'utilisation et de sécurité