Juniper E120 - RELEASE 11.1.X MODULE GUIDE 3-26-2010 Manuel utilisateur

E Series™Broadband Services Routers

E120 and E320 Module Guide

Release 11.1.x

Juniper Networks, Inc.

1194 North Mathilda Avenue

Sunnyvale, California 94089

USA

408-745-2000

www.juniper.net

Published: 2010-03-26

This guide provides an overview and description of the line modules (LMs), switch

route processor (SRP) modules, switch fabric modules (SFMs), and input/output

adapters (IOAs) available for the Juniper Networks E120 and E320 Broadband Services

Routers.

NOTE: A release may support multiple versions of a module or IOA. For information,

see Software Compatibility in JUNOSe System Basics Configuration Guide, Chapter 6,

Managing Modules.

Table 1 on page 3 lists the modules and IOAs supported by the router.

This book also contains the following appendixes:

■IOA Protocol Support on page 53

■Module and Slot Combinations on page 75

■Module Name Cross-Reference Information on page 79

■Product Reclamation and Recycling Program on page 81

For more information about E120 routers, E320 routers, modules, and IOAs, refer

to the following books:

■Module installation and maintenance—E120 and E320 Hardware Guide

■Managing routers—JUNOSe System Basics Configuration Guide

■Configuring modules—JUNOSe Link Layer Configuration Guide

2■

E120 and E320 11.1.x Module Guide

Table 1: Modules and IOAs

PageFirst JUNOSe SupportModule LabelModule/IOA Type

Line Module

57.0.1ES2

LM-4

77.2.0ES2

10G

UPLINK

LM-10 Uplink

98.0.0ES2

10G LM

LM-10

1110.1.0ES2

10G ADV LM

LM-10 ADV

SRP Module

127.0.1SRP-100SRP-100

148.2.0SRP-120SRP-120

167.3.0SRP-320SRP-320

SFM Module

187.0.1SFM-100SFM-100

198.2.0SFM-120SFM-120

207.3.0SFM-320SFM-320

Gigabit Ethernet IOA

217.0.1ES2-S1

GE-4

IOA

GE-4 IOA

257.2.0ES2-S1

GE-8

IOA

GE-8 IOA

299.0.0ES2-S3

GE-20

IOA

GE-20 IOA

337.0.1ES2-S1

10GE

IOA

10GE IOA

367.2.0ES2-S2

10GE PR

IOA

10GE PR IOA

OC3/STM1 ATM IOA

■3

Table 1: Modules and IOAs (continued)

PageFirst JUNOSe SupportModule LabelModule/IOA Type

407.0.1ES2-S1

OC3-8

STM1

ATM IOA

OC3/STM1-8 ATM IOA

OC12/STM4 ATM IOA

427.0.1ES2-S1

OC12-2

STM4

ATM IOA

OC12/STM4-2 ATM IOA

OC12/STM4 POS IOA

447.0.1ES2-S1

OC12-2

STM4

POS IOA

OC12/STM4-2 POS IOA

OC48/STM16 IOA

467.0.1ES2-S1

OC48

STM16

POS IOA

OC48/STM16 POS IOA

Redundancy IOA

487.0.1ES2-S1

REDUND

IOA

REDUND IOA

Service IOA

497.0.1ES2-S1

SERVICE

IOA

SERVICE IOA

SRP IOA

507.0.1SRP IOASRP IOA

4■

E120 and E320 11.1.x Module Guide

LM-4 Line Module

ES2 4G LM

Module label

■Not applicable

Number of ports

■First supported: 7.0.1

Software release

■176 W maximum

■Acts as frame forwarding engines for the physical interfaces

■Responsible for processing data traffic

■Pairs with IOAs to process data from different types of network connections

Description

■FFA ASIC

Type

■Supports a line rate of 128–byte packets on IOAs

■The 100–Gbps switch fabric allocates 3.4 Gbps of overall bandwidth to each regular

line module slot and 10 Gbps of overall bandwidth to each of the turbo slots (slot

2 and slot 4).

■The 320–Gbps switch fabric allocates 10 Gbps of overall bandwidth to each line

module slot. The line interface on the ES2 4G LM when installed in a 320 Gbps

fabric configuration is 3.9 Gbps; you can achieve this rate with random packet sizes

in the range 64–1518 bytes or a mixture of packet sizes that represent Internet

mix traffic (IMIX).

■See JUNOSe System Basics Configuration Guide, Chapter 6, Managing Modules for

more information.

Capability

■Not applicable

Software features

■E320 router

■E120 router

Model compatibility

■Not applicable

Line module compatibility

■SRP-100

■SRP-120

■SRP-320

SRP module compatibility

■Yes (Redundancy IOA must be installed in either slot 0 or slot 11)

■Can only back up another ES2 4G LM

Line module redundancy

compatibility

■Not applicable

Port redundancy support

■Not applicable

Cables and connectors

When lit, LED indicates:

■OK (green)—Self-test passed

■FAIL (red)—Failure detected

■ONLINE (green)—Online with no alarms or errors

■REDUN (green)—Redundant card available

LEDs

LM-4 Line Module ■5

LM-4 Line Module

■See Monitoring Modules in JUNOSe System Basics Configuration Guide, Chapter 6,

Managing Modules.

Alarms, errors, and events

6■LM-4 Line Module

E120 and E320 11.1.x Module Guide

LM-10 Uplink Line Module

ES2 10G UPLINK LM

Module label

■Not applicable

Number of ports

■First supported: 7.2.0

Software release

■150 W maximum

■Acts as frame forwarding engines for the physical interfaces

■Processes up to 10 Gb of data traffic

■Pairs with ES2–S2 10GE PR IOA only

■In a SRP-100 configuration, it must be installed in a turbo slot only (slot 2 or slot 4)

■If you install the line module in a slot other than slot 2 or slot 4, it will be disabled

■If you install a LM-10 Uplink module next to a configured line module that is

already installed in slot 3 or slot 5, the LM-10 Uplink module will be disabled

■If you install a line module in slot 3 or slot 5 next to a previously installed LM-10

Uplink module, the non-LM-10 Uplink module will be disabled

■In a SRP-120 and SRP-320 configuration, it can be installed in any slot

Description

■IXP network processor

Type

■Supports a line rate of 128–byte frames on IOAs

■The 100–Gbps switch fabric allocates 3.4 Gbps of overall bandwidth to each regular

line module slot and 10 Gbps of overall bandwidth to each of the turbo slots (slot 2

and slot 4).

■The 120–Gbps and 320–Gbps switch fabrics allocate 10 Gbps of overall bandwidth

to each line module slot.

■See JUNOSe System Basics Configuration Guide, Chapter 6, Managing Modules for more

information.

Capability

■Not applicable

Software features

■E320 router

■E120 router

Model compatibility

■Not applicable

Line module compatibility

■SRP-100

■SRP-120

■SRP-320

SRP module compatibility

■Yes (Redundancy IOA must be installed in either slot 0 or slot 11)

■Can only back up another ES2 10G UPLINK LM

Line module redundancy

compatibility

■Not applicable

Port redundancy support

■Not applicable

Cables and connectors

LM-10 Uplink Line Module ■7

LM-10 Uplink Line Module

When lit, LED indicates:

■OK (green)—Self-test passed

■FAIL (red)—Failure detected

■ONLINE (green)—Online with no alarms or errors

■REDUN (green)—Redundant card available

LEDs

■See Monitoring Modules in JUNOSe System Basics Configuration Guide, Chapter 6,

Managing Modules.

Alarms, errors, and events

8■LM-10 Uplink Line Module

E120 and E320 11.1.x Module Guide

LM-10 Line Module

ES2 10G LM

Module label

■Not applicable

Number of ports

■First supported: 8.0.0

Software release

■198 W maximum

■Acts as frame forwarding engines for the physical interfaces

■Processes up to 10 Gb of data traffic

■Pairs with ES2–S2 10GE PR IOA and ES2–S1 GE-8 IOA

■In a SRP-100 configuration, it must be installed in a turbo slot only (slot 2 or slot 4)

■If you install the line module in a slot other than slot 2 or slot 4, it will be disabled

■If you install the LM-10 module next to a configured line module that is already

installed in slot 3 or slot 5, the LM-10 module will be disabled

■If you install a line module in slot 3 or slot 5 next to a previously installed LM-10

module, the non-LM-10 module will be disabled

■In a SRP-120 and SRP-320 configuration, it can be installed in any slot

Description

■TFA ASIC

Type

■Supports a line rate of 128–byte frames on IOAs

■The 100–Gbps switch fabric allocates 3.4 Gbps of overall bandwidth to each regular

line module slot and 10 Gbps of overall bandwidth to each of the turbo slots (slot 2

and slot 4).

■The 120–Gbps and 320–Gbps switch fabrics allocate 10 Gbps of overall bandwidth to

each line module slot.

■See JUNOSe System Basics Configuration Guide, Chapter 6, Managing Modules for more

information.

Capability

■Not applicable

Software features

■Not applicable

Line module compatibility

■SRP-100

■SRP-120

■SRP-320

SRP module compatibility

■Yes (Redundancy IOA must be installed in either slot 0 or slot 11)

■Can only back up another ES2 10G LM

Line module redundancy

compatibility

■Not applicable

Port redundancy support

■Not applicable

Cables and connectors

LM-10 Line Module ■9

LM-10 Line Module

When lit, LED indicates:

■OK (green)—Self-test passed

■FAIL (red)—Failure detected

■ONLINE (green)—Online with no alarms or errors

■REDUN (green)—Redundant card available

LEDs

■See Monitoring Modules in JUNOSe System Basics Configuration Guide, Chapter 6,

Managing Modules.

Alarms, errors, and events

10 ■LM-10 Line Module

E120 and E320 11.1.x Module Guide

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Juniper Routeur réseau

Juniper

Juniper MX480 Instructions d'installation

Juniper

Juniper EX9214 Instructions d'installation

Juniper

Juniper MX Series Manuel utilisateur

Juniper

Juniper M7i Manuel utilisateur

Juniper

Juniper E SERIES BROADBAND SERVICES ROUTERS 11.3.X - ERX MODULE GUIDE REV... Manuel utilisateur

Juniper

Juniper EX4500 Series Manuel utilisateur

Juniper

Juniper JUNOS OS 10.4 Manuel utilisateur

Juniper

Juniper MX2020 Instructions d'installation

Juniper

Juniper SRX240 Series Instructions d'installation

Juniper

Juniper EX8200 Series Manuel utilisateur

Juniper

Juniper PTX3000 Fiche technique

Juniper

Juniper E120 Manuel utilisateur

Juniper

Juniper EX9200 Series Fiche technique

Juniper

Juniper PTX5000 Instructions d'installation

Juniper

Juniper MX240 Instructions d'installation

Juniper

Juniper PTX10001-36MR Manuel utilisateur

Juniper

Juniper E SERIES BROADBAND SERVICES ROUTERS 11.3.X - ERX HARDWARE GUIDE REV... Instructions d'installation

Juniper

Juniper ERX - RELEASE 11.1.X HARDWARE GUIDE... Instructions d'installation

Juniper

Juniper Internet Router M160 Instructions d'installation

Juniper

Juniper ACX1000 Instructions d'installation

Juniper

Juniper ACX2000 Manuel utilisateur

Juniper

Juniper TX MATRIX Instructions d'installation

Juniper

Juniper MX960 Manuel utilisateur

Juniper

Juniper ACX1000 Manuel utilisateur

Manuels Routeur réseau populaires d'autres marques

Allnet

Allnet ALL0333AU Manuel utilisateur

HomeSeer

HomeSeer HT-SEL Manuel utilisateur

Sercomm

Sercomm Genesis OC3505D Manuel utilisateur

Billion

Billion BIPAC 5102 Series Manuel utilisateur

TP-Link

TP-Link TD-8817 Manuel utilisateur

Motorola

Motorola MR1900 Manuel utilisateur

Digi

Digi IX14 Manuel utilisateur

Cisco

Cisco NCS 540 Manuel

XAVi

XAVi X8821e Manuel utilisateur

BEC

BEC 6200WZL Manuel utilisateur

MikroTik

MikroTik hAP ac3 Series Manuel utilisateur

Korenix

Korenix JetNet 5428G Series Manuel utilisateur

NETGEAR

NETGEAR FS526T - Switch Manuel utilisateur

Korenix

Korenix JetNet 5710G Series Manuel utilisateur

Automated Logic

Automated Logic ZN551 Manuel du propriétaire

Cisco

Cisco ASR 1000 Series Manuel de l'opérateur

EnGenius

EnGenius ESR-9710 Manuel utilisateur

Cisco

Cisco 805 Series Instructions d'utilisation et de sécurité