junger T-AP Manuel utilisateur
premium
audio processing
series T*AP
Television Audio Processor - Specifications
Jünger Audio Studiotechnik GmbH
Justus-von- iebig-Strasse 7
D -12489 Berlin
Germany
phone: +49-30-677721-0
fax: +49-30-677721-46
info@junger-audio.com
www.junger-audio.com
1/5
hardware
•
1RU compact 19" processing device with front side controls and displays
•
Remote Panel detachable panel with case, powered by POE (Power Over Ethernet)
•Remote Panel display 8ch LED bar graph, OLED operating display, LED status display
•Remote Panel buttons BYPASS, METER, context sensitive F-Keys, MENU, ESC
•Rotary encoder predefined functions, context sensitive modes
•
8 channel audio DSP program configuration 5.1+2 & 4x2 (8x1)
•
4x 2 channel audio delay up to 2sec.delay time each
•
Dolby® decoder built in optional Dolby® E or D or D+ or pulse decoder
•Dolby® encoder built in optional Dolby® E or D or D+ or pulse encoder
•Dolby® Metadata I/O two RS485 9-pin Sub-D connectors
•Two interface slots I/O expansion slots for option boards
•3G / HD / SD SDI module option board with SDI de-embedder / embedder and relay bypass
•4Ch AES I/O module option board with 4 AES3id I/Os and relay bypass
•4Ch analog I/O module option board with 4 analog line I/Os and relay bypass
•
4x 75Ohm AES I/O on board with relay bypass
•
4x SRC selectable per AES input
• RJ45 POE connector for connecting the Remote Panel
•RJ45 network connector 100BaseT full duplex Ethernet interface
•USB connector built in USB < > serial adapter to access the device service port
•8 GPIs balanced inputs on 25pin Sub-D
•
8 GPOs relay change over contacts on 25pin Sub-D
•
Aux power supply isolated 5V supply for external wiring
•
External sync IN 75Ohm input (Word Clock, AES, Black Burst, Tri-Level)
•
Sync OUT 75Ohm Word Clock output
premium
audio processing
series T*AP
Television Audio Processor - Specifications
Jünger Audio Studiotechnik GmbH
Justus-von- iebig-Strasse 7
D -12489 Berlin
Germany
phone: +49-30-677721-0
fax: +49-30-677721-46
info@junger-audio.com
www.junger-audio.com
2/5
functional blocks
•
Input Conditioner gain
• Upmix from mono / stereo to 5.1, extra input, auto mode, 5.1 cross fade
• Compressor Reference Level, Range, Ratio, Processing
• LevelMagic™ Leveler, Transient Processor, brick wall Limiter
• Loudness Control EBU R128 or ITU-BS.1770 or level based
• Output Conditioner delay up to 2sec. per audio processor channel
• Monitor output monitors DSP software blocks
• Extra Delay lines 4x 2Ch delays up to 2 sec. each
• Signal routing assignment of signal paths to and from the DSP, the delays, the Dolby de-
and encoders and across I/O interfaces
• Metadata generator display, creation or modification of Dolby Metadata
• Sync selector manual selection of several sync sources, auto fall back
Wordclock, Video (Black Burst or Tri Level), AES, Interface Board
control
• Remote Panel detachable 19" (fan less)
• Browser based GUI standard web browser (IE 8, FireFox 3.x)
• Telnet access to the system console
• Third party remote via L-S-B Broadcast Technology GmbH Ember protocol, HTTP protocol
• VSM control virtual panels, L-S-B remote panel
• GPI 8 isolated inputs
•GPO 8 relay output
monitoring
•Power 1 front panel LED, GUI status, SNMP
•Power 2 front panel LED, GUI status, SNMP
•Temperature GUI status, SNMP
• Device status front panel LED, several GUI status displays, SNMP
•Fan speed SNMP
•Input Signal loss GUI status, SNMP
•Input Signal errors GUI status, SNMP
•Processing range GUI status, SNMP
•Internal module failure GUI status, SNMP
• SNMP agent SNMPv1 based GET and TRAP functions
• Loudness logging Junger Audio Loudness Logger - PC software for file logging:
live plot, bar graph display, offline display & analyzer
premium
audio processing
series T*AP
Television Audio Processor - Specifications
Jünger Audio Studiotechnik GmbH
Justus-von- iebig-Strasse 7
D -12489 Berlin
Germany
phone: +49-30-677721-0
fax: +49-30-677721-46
info@junger-audio.com
www.junger-audio.com
3/5
technical data – Base Unit
• Power supply dual power supply, auto fail over
AC 85 V – 264 V, 50 Hz … 60 Hz
58W max
• AES input AES3id
24 Bit, 48 kHz, 0,32 … 1,2 Vpp
sample rate converters:
24 Bit, 32 kHz … 192 kHz, THD+N: < 130 dB @ 0 dBFS
• AES output AES3id
24 Bit, 48 kHz, nominal 1 Vpp @ 75 Ohm
power fail relay bypass
• Sync internal 48 kHz, +/- 10 ppm
• Sync input AES3id: 48 kHz, 0,32 … 1,2 Vpp @ 75 Ohm
Wordclock: 48 kHz, 1 … 3 V @ 75 Ohm
Video: Black Burst or Tri Level, 0.5 V … 1.0V @ 75 Ohm
• Sync output Wordclock: 2 V @ 75 Ohm
• Network RJ45 rear connector
10/100MBit Ethernet auto sense, full duplex, auto MDI/X
RJ45 front panel connector
10/100MBit Ethernet auto sense, full duplex, auto MDI/X
Power Over Ethernet IEEE 802.3af
• USB USB 2.0 connector to internal console interface
• GPI 3 V – 30 V balanced, auto polarity
• GPO relay change over contacts, 200mA/24V (DC/AC)
• Environmental operating temperature 0 ºC to 50 ºC
Base Unit - fan cooled
non operating -20 ºC to 70 ºC
humidity 90%, non condensing
• Dimensions 19", 1RU, depth 27 cm
and Weight net weight approx..5 kg, shipping weight 7,5 kg
technical data – Remote Panel
power supply POE (Power Over Ethernet), IEEE 802.3af
consumption 8 W
max cable length if connected with the Base Unit, 30m distance CAT.5E (26AWGx4P)
Dimensions 19", 1RU, depth 6 cm
Environmental operating temperature 0 ºC to 50 ºC
non operating temperature -20 ºC to 70 ºC
humidity 90%, non condensing
premium
audio processing
series T*AP
Television Audio Processor - Specifications
Jünger Audio Studiotechnik GmbH
Justus-von- iebig-Strasse 7
D -12489 Berlin
Germany
phone: +49-30-677721-0
fax: +49-30-677721-46
info@junger-audio.com
www.junger-audio.com
4/5
technical data – interface boards – SDI De-Embedder / Embedder [SDI 150]
• SDI input standards (auto sensing)
3G - SMPTE 424/425M (Level A/B)
HD - SMPTE 292M
SD - SMPTE 259M
formats
1080p23.98, 24, 25, 29.97, 30, 50, 59.95, 60
1080i50, 59.94, 60
720p23.98, 24, 25, 29.97, 30, 50, 59.94, 60
625i50
525i59.94, …
connector
BNC IEC 169-8)
75 Ohm
return Loss
> 15 dB (typ. > 18dB) from 5MHz to 1485 MHz
> 10 dB (typ. > 11 dB) from 1485 MHz to 2970 MHz
adaptive equalization, typical of Belden 1694A coaxial cable
250 m at 270 Mbps
250 m at 1.485 Gbps
150 m at 2.97 Gbps
jitter tolerance
Timing: > 2UI, Alignment: > 0.7 UI
• SDI output standards
3G - SMPTE 424/425M (Level A/B)
HD - SMPTE 292M
SD - SMPTE 259M
formats
1080p23.98, 24, 25, 29.97, 30, 50, 59.95, 60
1080i50, 59.94, 60
720p23.98, 24, 25, 29.97, 30, 50, 59.94, 60
625i50
525i59.94, …
quantization
10Bit
connector
BNC IEC 169-8)
75 Ohm
return Loss
> 15 dB (typ. > 18dB) from 5MHz to 1485 MHz
> 10 dB (typ. > 11 dB) from 1485 MHz to 2970 MHz
signal level
800 mV +/- 10%
D.C. offset
0.0 V +/- 0.5 V
rise and fall time
< 135 ps at HD/3G, < 800 ps at SD
overshoot
< 10% of amplitude
output jitter
Timing: < 0.5 UI, Alignment: < 0.2 UI
premium
audio processing
series T*AP
Television Audio Processor - Specifications
Jünger Audio Studiotechnik GmbH
Justus-von- iebig-Strasse 7
D -12489 Berlin
Germany
phone: +49-30-677721-0
fax: +49-30-677721-46
info@junger-audio.com
www.junger-audio.com
5/5
• Special features relay bypass (manual or automatic on power fail)
320 ms video delay (number of frames depends on the video format)
16 channel audio de-embedder / embedder
VANC (SMPTE 2020-2) de-embedder / embedder
16 x 16 de-embedder matrix (mono routing)
32 x 16 embedder matrix (mono routing)
320 ms audio delay per audio channel
automatic compensation of non processed audio signals for video delay
technical data – interface boards – 4x AES I/O [DD 188]
connector
25pin Sub-D female
inputs
110 Ohm balanced or 75 Ohm unbalanced jumper selection
0.3 V … 5.0 Vpp
sample rate converter
24 Bit, input sample rate 32 kHz … 192 kHz, THD+N < 130 dB @ 0 dBFS
outputs
110 Ohm balanced or 75 Ohm unbalanced jumper selection
4.0 Vpp balanced, 1.0 Vpp @ 75 Ohm
power fail relay bypass
technical data – interface boards – 4x analog I/O [AN 144]
connector
25pin Sub-D female
input
impedance: > 10 kOhm, electronically balanced
max input level: 0.0 dBu … +24 dBu adjustable in 0.5 dB steps
dynamic range: 115 dB
THD+N: @ -1 dBFS, 15 dBu: -90 dB
frequency response: 20 Hz … 22 kHz (+/- 0.25 dB)
crosstalk @ 20 kHz: > 100 dB
calibration gain mismatch: < 0.3 dB
output
impedance: 5 Ohm, electronically balanced
max. output level @ 0 dBFS: 0.0 dBu … +24 dBu adjustable in 0.5 dB steps
dynamic range: 110dB
THD+N @ -1 dBFS: 92 dB
frequency response: 20 Hz … 22 kHz (+/- 0.25 dB)
crosstalk @ 20 kHz: > 100 dB
gain mismatch balanced / unbalanced: < 0.3 dB
power fail relay bypass
warranty
standard Junger Audio limited parts and labor warranty
Specifications are subject to change without notice
Autres manuels pour T-AP
1
Table des matières
Autres manuels junger Matériel informatique
junger
junger d07 Manuel utilisateur
junger
junger V*AP Manuel utilisateur
junger
junger T-AP Manuel utilisateur
junger
junger D*AP4 FLX Manuel utilisateur
junger
junger D-AP LM4 Manuel utilisateur
junger
junger b40 Manuel utilisateur
junger
junger Accent1 Manuel utilisateur
junger
junger d07 Manuel utilisateur
junger
junger EASY LOUDNESS Manuel utilisateur
junger
junger b42 Manuel utilisateur
Manuels Matériel informatique populaires d'autres marques
EMC2
EMC2 VNX Series Manuel du propriétaire
Panasonic
Panasonic DV0PM20105 Manuel utilisateur
Mitsubishi Electric
Mitsubishi Electric Q81BD-J61BT11 Manuel utilisateur
Gigabyte
Gigabyte B660M DS3H AX DDR4 Manuel utilisateur
Raidon
Raidon iT2300 Manuel utilisateur
National Instruments
National Instruments PXI-8186 Manuel utilisateur
