JONATHAN Y Barrie JYL2403A Manuel utilisateur

PIECE DESCRIPTION PICTURE

QUANTITY

PIECE DESCRIPTION PICTURE QUANTITY

A Mounting

Bracket 1X H Cap Nut 2X

B mounting screw 2X I bulb 1X

C ground screw 1X J socket 1X

D support Screw 2X

E wire connector 3X

F Base 1X

G washer 2X

Model#: JYL2403A

Product Dimensions: 4.625''W X 6"E X 8.25"H

* Please make sure that you have all parts indicated before you begin assembly of this item

* This item should be assembled on a soft surface to prevent scratching the finish during assembly

* To reduce the risk of fire, electrical shock or injury to persons or property, please follow the guideline below for safe use and

installation

*The external flexible cable or cord of this lamp cannot be replaced

If the cord is damaged, the lamp shall be destroyed

Part List and Hardware List

WARNING

WE RECOMMEND INSTALLATION OF THIS LIGHTING FIXTURE BE DONE BY A LICENSED ELECTRICIAN.

WARNING *** SWITCH OFF THE MAIN ELECTRICAL SUPPLY FROM THE MAIN FUSE BOX/CIRCUIT

BREAKER BEFORE INSTALLATION.

INSPECT ITEM CAREFULLY BEFORE ATTEMPTING TO INSTALL. IF THERE IS ANY DAMAGE OR

OBVIOUS DEFECT, DO NOT INSTALL. ITEM MAY NOT BE RETURNED ONCE IT HAS BEEN INSTALLED.

CARE AND MAINTENANCE

To clean the outside of the fixture, use a dry or slightly dampened clean cloth (use clean water, never a solvent) to wipe the

surface of the fixture.

To clean the inside of the fixture, first disconnect power to the fixture by turning off the circuit breaker or by removing the fuse

at the fuse box. Next, use a dry or slighly damperned clean clorth (use clean water, never a solvent) to wipe the interior surface

of the fixture.

Do not use any cleaners with chemical, solvents or harsh abrasives. Use only a dry soft cloth to dust or wipe carefully.

NOTICE& IMPORTANT SAFETY INSTRUCTIONS

2. Fix the mounting bracket(A) to the outlet box with mounting screw(B).

3. Make wire connections, with wire connectors(E), following the reference chart listed below.

*Note: When parallel wire ( SPT I & SPT II ) is used. The neutral wire is square shaped

and ridged and the hot wire will be round in shape and smooth. ( See Illustration on left. )

Grounding Instructions:

a) For installation in the United States: Wrap ground wire from outlet box around green

ground screw(C) on mounting bracket, no less than 2" from wire end. Tighten ground screw. If

fixture is supplied with a ground wire, connect to outlet ground wire with a wire connector.

b) For installation in Canada: If fixture is supplied with ground wire, wrap ground wire

around green grounding screw on mounting bracket. Tighten ground screw.

4.Fix the base(F) to the support screw (D)by Using 2pcs Cap Nuts(H) and washer(G) .

5. Insert the bulb (I) into the socket (J).

PLEASE USE TYPE"A" BULB MAX 40-WATT OR CFL BULB MAX

13-WATT OR LED BULB MAX 9-WATT

THERE IS 1PC 4 WATT LED BULB IN THE BOX

ENJOY YOUR LAMP

* Parallel Cord (round & smooth) * Parallel Cord (square & ridged)

Clear, Brown, Gold or Black without Tracer (colored stripes) Clear, Brown, Gold or Black with Tracer (colored stripes)

Insulated Wire (not green) with copper metal conductor Insulated Wire (not green) with Silver metal conductor.

Connect, Hot, Black or Red Outlet Supply Wire to: Connect, Neutral, White Outlet Supply Wire to:

Black White

PREPARATION

Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and

hardware contents list. If any part is missing or damaged, do not attempt to assemble the product.

Estimated Assembly Time: 20 minutes.

1.Remove the Mounting bracket(A) from the base(F).

Table des matières

Autres manuels JONATHAN Y Éclairage extérieur

JONATHAN Y

JONATHAN Y JYL3036A Manuel utilisateur

JONATHAN Y

JONATHAN Y JYL9054A Manuel utilisateur

JONATHAN Y

JONATHAN Y Traditional JYL8003A Manuel utilisateur

JONATHAN Y

JONATHAN Y JYL3031A Manuel utilisateur

JONATHAN Y

JONATHAN Y JYL1014A Manuel utilisateur

JONATHAN Y

JONATHAN Y JYL2076A Manuel utilisateur

JONATHAN Y

JONATHAN Y JYL3066 Manuel utilisateur

JONATHAN Y

JONATHAN Y JYL1085A Manuel utilisateur

JONATHAN Y

JONATHAN Y JYL2072A/B Manuel utilisateur

JONATHAN Y

JONATHAN Y JYL2046A Manuel utilisateur

JONATHAN Y

JONATHAN Y JYL3023A Manuel utilisateur

JONATHAN Y

JONATHAN Y JYL9052A Manuel utilisateur

JONATHAN Y

JONATHAN Y JYL3077A Manuel utilisateur

JONATHAN Y

JONATHAN Y JYL8006A Manuel utilisateur

JONATHAN Y

JONATHAN Y JYL2019A Manuel utilisateur

JONATHAN Y

JONATHAN Y JYL5045A B Manuel utilisateur

JONATHAN Y

JONATHAN Y JYL5042A Manuel utilisateur

JONATHAN Y

JONATHAN Y JYL6123A Manuel utilisateur

JONATHAN Y

JONATHAN Y JYL5036A Manuel utilisateur

JONATHAN Y

JONATHAN Y JYL7116A Manuel utilisateur

JONATHAN Y

JONATHAN Y JYL3020 Manuel utilisateur

JONATHAN Y

JONATHAN Y JYL4014 Manuel utilisateur

JONATHAN Y

JONATHAN Y Cadiz JYL7609A Manuel utilisateur

JONATHAN Y

JONATHAN Y JYL3038 Manuel utilisateur

Manuels Éclairage extérieur populaires d'autres marques

Sealey

Sealey LED37 Manuel utilisateur

nordlux

nordlux VEJERS Guide de l'utilisateur

SImx

SImx ELITE LED LHTC637 Manuel utilisateur

GEV

GEV CAROLINE 10833 Manuel utilisateur

NEBO

NEBO NEB-LSP-0020 Manuel utilisateur

WE-EF

WE-EF PFL540 LED Manuel utilisateur

Lindby

Lindby 9949029 Manuel utilisateur

HEPER

HEPER DOGO Side LW6048.585-US Instructions d'installation et d'utilisation

HEPER

HEPER LW8034.003-US Instructions d'installation et d'utilisation

Maretti

Maretti VIBE S 14.6080.04.A Manuel utilisateur

BEGA

BEGA 84 253 Manuel

HEPER

HEPER MINIMO Instructions d'installation et d'utilisation

LIGMAN

LIGMAN BAMBOO 3 Manuel utilisateur

Maretti

Maretti TUBE CUBE WALL 14.4998.04 Manuel utilisateur

Maxim Lighting

Maxim Lighting Carriage House VX 40428WGOB Manuel utilisateur

urban ambiance

urban ambiance UQL1273 Manuel utilisateur

TotalPond

TotalPond 52238 Manuel utilisateur

Donner & Blitzen

Donner & Blitzen 0-02661479-2 Manuel utilisateur