Johnson Controls Tyco TFP PH5 Manuel utilisateur

Model TFP PH5 — 5.6 K-factor

Institutional Horizontal Sidewall Sprinklers

Standard Response, Standard Coverage

Page 1 of 4 AUGUST 2018 TFP654

IMPORTANT

Refer to Technical Data Sheet

TFP2300 for warnings pertaining to

regulatory and health information.

Always refer to Technical Data

Sheet TFP700 for the “INSTALLER

WARNING” that provides cautions

with respect to handling and instal-

lation of sprinkler systems and com-

ponents. Improper handling and

installation can permanently damage

a sprinkler system or its compo-

nents and cause the sprinkler to fail

to operate in a ﬁre situation or cause

it to operate prematurely.

Worldwide

Contacts

www.tyco-ﬁre.com

General

Description

The TYCO Model TFP PH5, 5.6 K-fac-

tor, Institutional Horizontal Sidewall

Sprinklers are standard-response,

standard-coverage spray sprinklers

designed for use in areas such as cor-

rectional, detention, and mental health

care facilities.

The unique features of the Model

TFP PH5 provide a tamper-resistant

sprinkler design that helps eliminate

the opportunity for individuals to injure

themselves or others with components

of a ﬁre sprinkler. At the same time,

the Model TFP PH5 optimizes an

aesthetically appealing ﬂush design

that conceals most of the operating

parts.

NOTICE

The TYCO Model TFP PH5 Institu-

tional Horizontal Sidewall Sprinklers

described herein must be installed

and maintained in compliance with

this document, as well as with the

applicable standards recognized by

the Approval agency, in addition to

the standards of any authorities having

jurisdiction. Failure to do so may impair

the performance of these devices.

Johnson Controls specifically dis-

claims any liability for damages or

injury (including death) arising out of or

caused by manipulation, dismantling,

or misuse of TFP PH5 Sprinklers or the

use or attempted use of the TFP PH5

Sprinklers or any component thereof as

an instrument unrelated to its intended

function as a ﬁre protection device.

The owner is responsible for main-

taining their fire protection system

and devices in proper operating con-

dition. Contact the installing contrac-

tor or product manufacturer with any

questions.

Sprinkler

Identiﬁcation

Number (SIN)

TY3390

Technical

Data

Approvals

UL and C-UL Listed for light and ordinary

hazard occupancies (Refer to the Design

Criteria section.)

NYC under MEA 351-01-E

Maximum Working Pressure

175 psi (12,1 bar)

Inlet Thread Connection

1/2 in. NPT

Discharge Coefﬁcient

K = 5.6 GPM/psi½(80,6 LPM/bar½)

Temperature Ratings

165° F ( 74°C )

Finishes

Sprinkler: Chrome Plated

Escutcheon: Chrome Plated

Physical Characteristics

Body . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Brass

Deﬂector . . . . . . . . . . . . . . . . . . . . . . . . . .Bronze

Deﬂector Hood . . . . . . . . . . . . . . . . . . . . .Bronze

Deﬂector Post . . . . . . . . . . . . . . . . . . . . . .Bronze

Deﬂector Post Pin . . . . . . . . . . . . . . . . . . .Bronze

Deﬂector Core. . . . . . . . . . . . . . . . . . . . . .Bronze

Compression Screw . . . . . . . . . . . . . . . . .Bronze

Lever . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Bronze

Release Spring . . . . . . . . . . . . . . . . . . . . .Bronze

Sealing Assembly ..Beryllium Nickel w/TEFLON

Dust Cover .............Chrome Plated Steel

Fusible Element . . . . . . . . . . . . .Solder, Copper,

Stainless Steel

Operation

In the standby condition, the design of

the TYCO Model TFP PH5 is such that

a dynamic load of 80 lb (36 kg) or more

applied to the linkage mechanism will

release the sprinkler. Also, when prop-

erly installed, the escutcheon is held

fast to the wall to deter its removal.

The shape of the escutcheon cannot

be grasped easily, which further deters

tampering.

A fusible solder operating element

secures the linkage mechanism of the

Model TFP PH5. When the rated tem-

perature is reached, the solder melts,

releasing the linkage mechanism that

holds the sprinkler closed. This release

allows the deﬂector to extend outward

and water to ﬂow.

TFP654

Page 2 of 4

Design

Criteria

The TYCO Model TFP PH5, 5.6 K-fac-

tor (SIN TY3390) Institutional Horizon-

tal Sidewall Sprinklers are intended for

use in ﬁre protection systems designed

in accordance with the standard instal-

lation rules recognized by the appli-

cable Listing or Approval agency (for

example, UL Listing is based on NFPA

13 requirements).

NOTICE

The Sprinkler Body must not extend

beyond the Institutional Escutcheon

(Ref. Figure 4). Otherwise, the tamper-

resistant design of the Model TFP PH5

will be compromised. Consequently,

Model 1752 Spacers, which are associ-

ated with other TFP institutional sprin-

klers, cannot to be utilized.

Integrity of the tamper-resistant design

of the Institutional Escutcheon is

dependent on the piping installation

design. When installed properly, the

Institutional Escutcheon is held fast to

the mounting surface by the tighten-

ing of the sprinkler assembly into the

sprinkler ﬁtting. In order to accomplish

a proper installation, the sprinkler ﬁtting

must be:

• properly located with respect to dis-

tance from the face of the sprinkler

ﬁtting to the face of the mounting

surface (Ref. Figure 3);

• rigidly secured and held immobile;

and,

• installed with the center-line of the

sprinkler ﬁtting perpendicular to the

mounting surface to assure that the

escutcheon sits squarely against

the mounting surface around the

entire perimeter of the Institutional

Escutcheon.

Figure 3 illustrates a typical installa-

tion that can be utilized to help adjust

the location of the sprinkler ﬁtting; to

help assure immobility of the sprinkler

ﬁtting; and, to help maintain perpen-

dicularity of the sprinkler ﬁtting to the

mounting surface.

Installation

The TYCO Model TFP PH5 Sprinklers

must be installed in accordance with

this section.

NOTICE

Refer to the Design Criteria section for

important information regarding the

piping installation design and its effect

on maintaining the integrity of the tam-

per-resistant design of the Institutional

Escutcheons.

Obtain a leak-tight 1/2 in. NPT sprin-

kler joint by applying a minimum-to-

maximum torque of 7 to 14 lb-ft (9,5

to 19,0 N∙m). Higher levels of torque

can distort the sprinkler inlet with con-

sequent leakage or impairment of the

sprinkler.

Do not attempt to compensate for

improper location of the sprinkler ﬁtting

by under- or over-tightening the sprin-

kler. Re-adjust the position of the sprin-

kler ﬁtting to suit.

The Model TFP PH5 (SIN TY3390) must

be installed with a deﬂector-to-ceiling

distance of 4 in. to 6 in. (100 mm to

152,4 mm). To meet this requirement,

the center-line of the sprinkler water-

way must be located 4-1/2 in. to

6-1/2 in. (114,3 mm to 165,1 mm) below

the ceiling (Ref. Figure 3).

Only the Institutional Escutcheons

shown in Figure 2 can be utilized with

the Model TFP PH5.

NPT

1/2"

CENTERLINE

WATERWAY

OF SPRINKLER

1/2"

(12.7 mm)

ASSEMBLY

DEFLECTOR

IN OPERATED

POSITION

WRENCHING

NOTCH (2)

SPRINKLER

LINKAGE

MECHANISM

WITH DEFLECTOR

INSTALL

SPRINKLER

HOOD ORIENTED AT

TOP AS SHOWN

SPRINKLER

FITTING

FACE OF

NOMINAL MAKE-IN

7/16" (11.1 mm)

14 5

3 7 6

2.81"

(71.4 mm)

(80.8 mm)

3.18"

INSTALLED SIDE VIEW

OPERATED SIDE VIEW

FRONT VIEW

INSTALLED

CROSS-SECTION VIEW

Deflector Post

Deflector Post Pin

Release Spring

Dust Cover

Fusible Element

Lever

Compression Screw

(2 req'd)

Deflector Core

Deflector

Body

Deflector Hood

Components:

FIGURE 1

MODEL TFP PH5 INSTITUTIONAL

HORIZONTAL SIDEWALL SPRINKLER

TFP654

Page 3 of 4

After the installation is complete, make

certain that the Institutional Escutcheon

is held fast (that is, tight with no move-

ment or gap) to the mounting surface

and that the Escutcheon sits squarely

against the mounting surface around

the entire perimeter of the Escutcheon.

Step 1. Install the TFP PH5 Sprinklers

horizontally with the center-line of their

waterway perpendicular to the mount-

ing surface and parallel to the ceiling.

The Deﬂector must be located with the

top towards the ceiling (Ref. Figure 1).

Step 2. With the Institutional Escutch-

eon in place and with pipe-thread

sealant applied to the pipe threads,

hand-tighten the sprinkler into the

sprinkler ﬁtting.

Step 3. Using only the Model 1509-3

Sprinkler Wrench (Ref. Figure 5),

wrench-tighten the Sprinkler while

applying the wrenching teeth of the

Sprinkler Wrench to the sprinkler

wrenching notch areas (Ref. Figure 1).

Step 4. After the installation is com-

plete, make certain that the Institutional

Escutcheon is held fast to the mounting

surface and that it sits squarely against

the mounting surface around its entire

perimeter.

NOTICE

The Sprinkler Body must not extend

beyond the Institutional Escutcheon

(Ref. Figure 4). Otherwise, the tamper-

resistant design of the Model TFP PH5

will be compromised.

Care and

Maintenance

The TYCO Model TFP PH5 Sprinklers

must be maintained and serviced in

accordance with this section.

Before closing a ﬁre protection system

main control valve for maintenance

work on the ﬁre protection system

that it controls, obtain permission to

shut down the affected ﬁre protection

systems from the proper authorities

and notify all personnel who may be

affected by this action.

The owner must assure that the sprin-

klers are not used for hanging any

objects and that the sprinklers are only

cleaned by means of gently dusting

with a feather duster; otherwise, non-

operation in the event of a ﬁre or inad-

vertent operation may result.

Sprinklers which are found to be

leaking or exhibiting visible signs of

corrosion must be replaced.

Automatic sprinklers must never be

painted, plated, coated, or other-

wise altered after leaving the factory.

Modiﬁed sprinklers must be replaced.

Sprinklers that have been exposed to

corrosive products of combustion, but

have not operated, should be replaced

if they cannot be completely cleaned

by wiping the sprinkler with a cloth or

by brushing it with a soft bristle brush.

Care must be exercised to avoid

damage to the sprinklers - before,

during, and after installation. Sprin-

klers damaged by dropping, striking,

wrench twist/slippage, or the like, must

be replaced. Also, replace any sprinkler

that has a cracked bulb or that has lost

liquid from its bulb. Refer to the Instal-

lation section for additional information.

The owner is responsible for the inspec-

tion, testing, and maintenance of their

ﬁre protection system and devices in

compliance with this document, as well

as with the applicable standards of the

NATIONAL FIRE PROTECTION ASSO-

CIATION (that is, NFPA 25), in addi-

tion to the standards of any authorities

having jurisdiction. Contact the install-

ing contractor or product manufacturer

with any questions.

Automatic sprinkler systems should be

inspected, tested, and maintained by a

qualiﬁed Inspection Service in accor-

dance with local requirements and/or

national codes.

Note:

Model 1752 Spacers are not to be used to obtain horizontal adjustment for the Model TFP PH5 with Style B2 or C

Escutcheons.

CLEARANCE FOR

DETERMINED BY

DIAMETER

REDUCING

COUPLING

CLEARANCE FOR

DETERMINED BY

MOUNTING SURFACE

FITTING FLUSH WITH

FACE OF SPRINKLER

DIAMETER

REDUCING

COUPLING

(71.4 mm)

4-1/4" DIA.

(108.0 mm)

2.81"

(65.1 mm)

2-9/16"

1-3/16"

(30.2 mm)

5" DIA.

(127.0 mm)

(37.6 mm)(33.8 mm)

1.33" 1.48"

STYLE B2

STYLE C

FIGURE 2

INSTITUTIONAL ESCUTCHEON OPTIONS

FOR USE WITH THE MODEL TFP PH5

TFP654

Page 4 of 4

NATIONAL FIRE PROTECTION ASSOCIATION and NFPA are registered trademarks of National Fire Protection Association;

TEFLON is a registered trademark of DuPont

1400 Pennbrook Parkway, Lansdale, PA 19446 | Telephone +1-215-362-0700

Limited

Warranty

For warranty terms and conditions, visit

www.tyco-ﬁre.com.

Disclaimer

Johnson Controls specifically dis-

claims any liability for damages or

injury (including death) arising out of or

caused by manipulation, dismantling,

or misuse of TFP PH5 Sprinklers or

the use or attempted use of TFP PH5

Sprinklers or any component thereof as

an instrument unrelated to its intended

function as a ﬁre protection device.

Ordering

Procedure

Contact your local distributor for avail-

ability. When placing an order, indicate

the full product name and Part Number

(P/N).

Sprinkler Assemblies

Specify: 5.6 K-factor, Chrome Plated,

165°F (74°C), Model TFP PH5 (TY3390)

Institutional Horizontal Sidewall Sprin-

kler, P/N 51-106-9-165

Separately Ordered Escutcheons

Specify: Style (B2 or C), Chrome

Plated, Institutional Escutcheons, P/N

(specify):

Style B2 .....................56-001-7-512

Style C ......................56-001-7-513

Separately Ordered Wrenches

Specify: Model 1509-3 Sprinkler

Wrench, P/N 56-001-5-093

Separately Ordered Parts For

Installation In Concrete Walls

Specify: Model 1781 Centering

Grommet for installation in concrete,

P/N 56-000-1-781

Specify: Model 1780 Retaining Flange

with Set Screws for installation in con-

crete, P/N 56-000-1-780

1” STEEL PIPE

(15,9 mm)

END

WITH GROOVED

(LENGTH TO SUIT

STEEL PIPE SLEEVE

WALL THICKNESS)

OR 2” (50 mm) I.D.

WITH SET SCREWS

RETAINING FLANGE

CORED HOLE

2” SCH. 40

WALL THICKNESS

CENTERING GROMMET

1” x 1/2" M.I. CLASS 150

REDUCING COUPLING

4” (101,6 mm) to 6” (152,4 mm)

WATERWAY

OF SPRINKLER

CENTERLINE

FINISHED

CEILING

RESULTS IN DEFLECTOR-

TO-CEILING DISTANCE OF

WITH ESCUTCHEON

MODEL TFP PH5

4-1/2” (114,3 mm) to

6-1/2" (165,1 mm) *

MODEL 1781

MODEL 1780

5/8”

ESCUTCHEON

BEYOND

MECHANISM

LINKAGE

NOT EXTEND

SPRINKLER

BODY MUST

ESCUTCHEON

SPRINKLER

BODY

1/2" DRIVE

ACCEPTS

TEETH

WRENCHING

FIGURE 3

TYPICAL INSTALLATION WHEN USING MODEL 1780 RETAINING

FLANGE AND MODEL 1781 CENTERING GROMMET

FIGURE 4

PROPER POSITIONING OF

ESCUTCHEON

FIGURE 5

MODEL 1509-3

SPRINKLER WRENCH

Ce manuel convient aux modèles suivants

Autres manuels Johnson Controls Système d'irrigation

Johnson Controls

Johnson Controls tyco RAPID RESPONSE LFII Series Manuel utilisateur

Johnson Controls

Johnson Controls tyco TY-B Series Manuel utilisateur

Johnson Controls

Johnson Controls tyco TY-FRL Series Manuel utilisateur

Johnson Controls

Johnson Controls tyco TY-B Series Manuel utilisateur

Johnson Controls

Johnson Controls tyco AQUAMIST ULF AM29 Manuel utilisateur

Johnson Controls

Johnson Controls tyco TFP700 Manuel utilisateur

Johnson Controls

Johnson Controls tyco DSB-2 Manuel utilisateur

Johnson Controls

Johnson Controls tyco RFII Series Manuel utilisateur

Johnson Controls

Johnson Controls tyco AQUAMIST ULF AM28 Manuel utilisateur

Johnson Controls

Johnson Controls tyco RFII-MRI Series Manuel utilisateur

Johnson Controls

Johnson Controls tyco TY4334 Instructions d'utilisation et d'entretien

Johnson Controls

Johnson Controls tyco TY-B Series Manuel utilisateur

Johnson Controls

Johnson Controls Tyco TY720 Manuel utilisateur

Johnson Controls

Johnson Controls tyco TY-FRB Series Manuel utilisateur

Johnson Controls

Johnson Controls tyco ILLUSION Manuel utilisateur

Johnson Controls

Johnson Controls Tyco EC-11 Series Manuel utilisateur

Johnson Controls

Johnson Controls tyco TY-FRB Series Manuel utilisateur

Johnson Controls

Johnson Controls SABROE NS-HPAC Manuel utilisateur

Johnson Controls

Johnson Controls tyco TY1234 Manuel utilisateur

Johnson Controls

Johnson Controls Tyco EC-8 Series Manuel utilisateur

Johnson Controls

Johnson Controls tyco TY2335 Manuel utilisateur

Johnson Controls

Johnson Controls tyco TY-FRB Series Manuel utilisateur

Johnson Controls

Johnson Controls CDS-2000 Manuel utilisateur

Johnson Controls

Johnson Controls tyco CC3 Manuel utilisateur

Manuels Système d'irrigation populaires d'autres marques

Hunter

Hunter Institutional Series Manuel utilisateur

Cellfast

Cellfast 52-305 Manuel utilisateur

Tyco Fire Product

Tyco Fire Product Star Galaxy SGQR Manuel utilisateur

Tyco Fire Product

Tyco Fire Product CENTRAL A Manuel utilisateur

Oral Care Technologies

Oral Care Technologies Hydro Floss Manuel utilisateur

Reliable

Reliable F1-300 Manuel utilisateur

Tyco Fire Product

Tyco Fire Product Gem F892 Manuel utilisateur

Netafim

Netafim NETBEAT Manuel utilisateur

Irrigation-Mart

Irrigation-Mart KIT-GK100-RV-B Manuel utilisateur

Tyco

Tyco CC3 Manuel utilisateur

Reliable

Reliable F4FR Manuel utilisateur

OpenSprinkler

OpenSprinkler OSPi Manuel utilisateur

EINHELL

EINHELL GE-WW 5537 E Manuel utilisateur

Valley

Valley Bender160 Manuel utilisateur

Reliable

Reliable F1FR42 Series Manuel utilisateur

Reliable

Reliable F1FR-300 Manuel utilisateur

Toro

Toro 730 Series Guide rapide

Eden

Eden 97063-EDAMZ Manuel utilisateur

Johnson Controls tyco TFP PH5 Manuel utilisateur

Manuels Système d'irrigation populaires d'autres marques