JLab JBuds Air Manuel utilisateur
S
A
T
I
S
F
A
C
T
I
O
N
G
U
A
R
A
N
T
E
E
30
DAY
C
U
S
T
O
M
E
R
S
U
P
P
O
R
T
U
.
S
.
B
A
S
E
D
We love that you are rocking JLab Audio!
We take pride in our products and fully stand behind them.
JBUDS AIR
EARBUDS
YOUR SATISFACTION IS GUARANTEED
You may exchange or return merchandise within 30 days of the purchase date. Please return the item to
the location you purchased it. If your item has been opened or used, restrictions may apply.
YOUR WARRANTY
You may register your product at jlabaudio.com/register. All warranty claims are subject to JLab Audio
authorization and at our sole discretion. Retain your proof of purchase to ensure warranty coverage.
CONTACT US
L
I
M
I
T
E
D
T
W
O
Y
E
A
R
AUTO-CONNECTING EARBUDS
Press and hold 3+ seconds on both buttons.
White lights will flash to indicate earbuds
are automatically pairing to each other.
PAIRING NEW /ADDITIONAL BLUETOOTH DEVICES:
When earbuds are powered off, press and hold Right Earbud button 10+ seconds. The earbud will flash blue and white
indicating it is ready to pair to your Bluetooth device. Once connected, turn on Left Earbud to auto connect both earbuds.
FIRST TIME SETUP: BLUETOOTH PAIRING
1CONNECTING TO BLUETOOTH
Once earbuds pair, the right earbud will flash blue and white
indicating the earbuds are ready to pair to your Bluetooth device.
Left earbud will be solid white.
2
CONNECTING TO BLUETOOTH
Select “JLab JBuds Air” in your device settings. Voice prompt “Bluetooth connected” followed by solid white lights
will indicate you are connected. You will now be ready to use your JBuds Air.
3
Bluetooth
JLab JBuds Air
Settings
Bluetooth
Settings
ACCESSORIES
CHARGING
CASE
2 CUSH
FINS™
USB CABLE
3 GEL TIP
SIZES
The left and right earbud need to
match the corresponding L and R
letters on the charging case for
proper charging and connection.
Placing the earbuds in the case will
auto power off the earbuds and
start charging.
Solid blue lights on the earbuds
will indicate charging and will turn
off after earbuds are fully charged.
Case will show blinking blue lights
while charging.
Removing the earbuds from the case will turn on
and auto connect to your device for next use.
RIGHT
EARBUD
LEFT
EARBUD
LEFT
EARBUD
RIGHT
EARBUD
TURN ON / OFF:
Press & hold 5+ seconds.
VOLUME DOWN: 1 click.
PLAY / PAUSE: 2 clicks.
TRACK BACK:
Press & hold 1+ second.
TURN ON / OFF:
Press & hold 5+ seconds.
VOLUME UP: 1 click.
ANSWER: 1 click. HANGUP: 2 clicks.
REJECT INCOMING CALLS:
Press & hold 1+ second.
SIRI (iOS) or “OK GOOGLE” (ANDROID):
2 clicks.
TRACK FORWARD:
Press & hold 1+ seconds.
VOICE PROMPTS
“Hello”: Power ON
“Earbuds joined”:
Earbuds paired to each other
“Ready to Pair”: JBuds Air are
ready to pair to Bluetooth device
“Bluetooth Connected”:
Earbud is connected to device
“Battery Full”: 100-75%
“Battery Medium”: 75-25%
“Low Battery”: Less than 25%
When power decreases to 10%,
“Low Battery” will play
“Goodbye”: Power OFF
BUTTON FUNCTIONS
Click either the right or left earbud 3 times for different EQ settings (JBuds Air will cycle 3 EQ settings).
EQUALIZER MODES
JLab SIGNATURE
JLab C3™ signature
sound with amplified
bass and vocals
BALANCED
Even sound with
no additional
enhancements
BASS BOOST
Amplified bass
and sub-bass
CHARGING EARBUDS
Connect the JBuds Air to computer
or USB 5V output device.
LEDs pulse white when charging and
turn solid white when fully charged. OR
CHARGING CASE
Hold the earbud
vertical to the ear.
Try the optional Cush Fins and all
ear tips for best fit and proper seal.
TROUBLESHOOTING
CUSH FIN
EAR TIP
1Twist in the ear
canal to lock in.
2
FITTING
4
CAN YOU HEAR MUSIC FROM THE RIGHT EARBUD BUT NOT THE LEFT?
CONNECT/RECONNECT THE LEFT AND RIGHT EARBUDS
If the right earbud is working but no sound is coming out of the left, follow these steps to pair the two earbuds together.
3Repeat process with
LEFT earbud: Press and
hold 15+ seconds on
earbud button.
Release when earbud is
solid white. Once earbuds
connect, the right earbud
will flash blue and white
indicating it is ready to
connect to Bluetooth.
Left earbud will be
solid white.
Turn your device Bluetooth
back on.
Select “JLab JBuds Air”
to connect.
Bluetooth
JLab JBuds Air
Settings
Turn Bluetooth off on your
device.
Turn both earbuds off (by
pressing and holding each
earbud button until voice
prompt says ‘good bye’
or you see no lights).
1When earbuds are off, press and
hold 15+ seconds on the RIGHT
earbud button.
While holding, earbud will flash
blue and white.
Release when earbud flashes white.
2
Bluetooth
Settings
Note: To avoid having to reconnect the earbuds again, make sure you return the earbuds to the correct spot in the case.
See Charging Earbuds.
ECHOES ON CALLS
If you experience microphone echo/call quality with the JBuds Air, make sure the Cush Fin is not blocking the microphone port.
Microphone open
Microphone covered
WARM-UP YOUR HEADPHONES
Optional: Burn-in is the process for exercising new audio equipment. We recommend 40 hours of burn-in time for most headphones to reach
optimal performance. The main purpose of the process is to loosen the diaphragm of a newly crafted headphone and to stress the headphone
driver. Normal, everyday use can also burn-in the headphones though JLab’s proprietary burn-in provides an ideal mix of sounds and
frequency sweeps to achieve this.
Burn-in your audio equipment with the JLab Audio app available on the App Store and Google Play.
Or access the burn-in method at: jlabaudio.com/burnin
CAUTIONS
• Avoid extreme heat, cold, and humidity.
• Avoid dropping or crushing the earbuds.
• Wax may build up in the earbud tips, lowering the sound quality.
Carefully remove the wax with a cotton swab or other small tool to
improve the sound quality.
• If you experience discomfort or pain, try lowering the volume
or discontinuing use temporarily.
• If you experience regular discomfort while using this product,
discontinue use and consult your physician.
• We recommend you treat your earbuds as you would a nice pair
of sunglasses and keep them in safe location when not in use.
JLABAUDIO.COM
• The Bluetooth connection is established from the right earbud.
For most stable connection, keep the device near right hand side
or in right pocket.
• When receiving/taking calls, only the right earbud will accept and
play from your mobile device. The left earbud will mute during calls
and continue playback after call ends.
• If you prefer to wear only one earbud, you must wear the right earbud.
QUICK TIPS WARNING
Fully dry off the earbuds before
putting in the charging case to
avoid any damage to the case.
The earbuds are sweat/water
resistant but the case is not.
Autres manuels pour JBuds Air
5
Table des matières
Autres manuels JLab Casque audio
JLab
JLab GO AIR SPORT Manuel utilisateur
JLab
JLab JBUDS LUX ANC Manuel utilisateur
JLab
JLab JBuds Frames Manuel utilisateur
JLab
JLab JBUDS MINI Manuel utilisateur
JLab
JLab EPIC2 Manuel utilisateur
JLab
JLab JBuds Air Manuel utilisateur
JLab
JLab JBUDS AIR SPORT Manuel utilisateur
JLab
JLab Open Sport Manuel utilisateur
JLab
JLab EPIC Manuel utilisateur
JLab
JLab Studio Pro ANC Wireless Manuel utilisateur
JLab
JLab GO AIR POP Manuel utilisateur
JLab
JLab GO AIR POP Manuel utilisateur
JLab
JLab JBUDS AIR EXEC Manuel utilisateur
JLab
JLab Epic Air Sport ANC Manuel utilisateur
JLab
JLab GO AIR SPORT Manuel utilisateur
JLab
JLab JBuds Air Manuel utilisateur
JLab
JLab Go Air Tones Manuel utilisateur
JLab
JLab JBUDS AIR PRO Manuel utilisateur
JLab
JLab Open Sport Manuel utilisateur
JLab
JLab JBUDS AIR PRO Manuel utilisateur
