JBL HP6B Manuel utilisateur

HP6B, HP8B,

HP82B,

HP88F

simple

set-up guide

thank you for choosing JBL. For over 50 years, JBL has

been involved in every aspect of musical and film recording and

reproduction, from live performances to monitoring the recordings

you play in your home, car, or office.

We’re confident that the JBL loudspeakers you have

chosen will provide every note of enjoyment that you expected –

and that when you think about purchasing additional audio

equipment for your home, car, or office, you will once again

choose JBL.

Please take a moment to complete the enclosed profile card. It

enables us to keep you posted on our latest advancements, and

helps us to better understand our customers and build products

that meet your needs and expectations.

JBL Consumer Products

HP Series OM 7/22/98 12:43 PM Page 1

one. Speaker Placement

Magnet

HP6B, HP8B, HP82B

HP88F

Tweeter Grille Installation (optional)

HP Series OM 7/22/98 12:43 PM Page 2

Troubleshooting

two. Speaker Connections

Connection Tips

– +– +

– + – +

Speaker Outputs

RIGHT LEFT

Speakers and electronics terminals have corresponding (+) and

(–) terminals. It is important to connect both speakers identi-

cally: (+) on the speaker to (+) on the amplifier and (–) on the

speaker to (–) on the amplifier. Wiring “out of phase” results in

thin sound, weak bass and a poor stereo image.

If there is no sound from

any of the speakers, check

the following:

• Receiver/amplifier is on and

a source is playing.

• Review proper operation of

your receiver/amplifier.

If there is no sound coming

from one speaker, check the

following:

• Check the “Balance” control

on your receiver/amplifier.

• Check all wires and connec-

tions between receiver/

amplifier and speakers.

• Make sure all wires are

connected. Make sure none of

the speaker wires are frayed,

cut, or punctured.

If the system plays at low

volumes but shuts off as

volume is increased, check

the following:

• Check all wires and connec-

tions between receiver/

amplifier and speakers.

• Make sure all wires are con-

nected. Make sure none of the

speaker wires are frayed, cut,

or punctured.

• If more than one pair of

main speakers is being used,

check the minimum imped-

ance requirements of your

receiver/amplifier.

If there is low bass output,

check the following:

• Make sure the polarity

(+ and –) of the left and

right “Speaker Inputs” are

connected properly.

HP Series OM 7/22/98 12:43 PM Page 3

Declaration of Conformity

We, JBL Europe A/S

Kongevejen 194B

DK-3460 Birkerød

DENMARK

declare in own responsibility, that the products described

in this owner’s manual are in compliance with technical

standards:

EN 50 081-1/1992

EN 50 082-1/3.1995

Steen Michaelsen

JBL Europe A/S

Birkerød. DENMARK. 7/96

JBL Consumer Products

80 Crossways Park West, Woodbury, NY 11797

8500 Balboa Boulevard, Northridge, CA 91329

1-800-336-4JBL (4525) (USA only)

of JBL, Incorporated.

Printed in USA 7/96 Part No. 330990-001

Specifications

Occasional refinements may

be made to existing products

without notice, but will

always meet or exceed origi-

nal speci-fications unless

otherwise stated.

*The maximum recommended

amplifier power rating will

ensure proper system head-

room to allow for occasional

peaks. We do not recommend

sustained operation at these

maximum power levels.

SYSTEM HP6B HP82B

Frequency Response (–6dB): 57Hz – 22kHz 48Hz – 22kHz

Recommended Maximum

Power Handling*: 100 watts 150 watts

Sensitivity @ 1 watt/1 meter:

89dB 90dB

Normal Impedance: 8 ohms 8 ohms

Crossover Frequency: 2800Hz 3000Hz

Woofer: 6-1/2" cast frame 8" cast frame

Midrange: N/A N/A

Tweeter: 1" pure titanium 1" pure titanium

Finish: black ash woodgrain vinyl black ash woodgrain vinyl

Dimensions (HxWxD): 16-1/2 x 9-1/4 x 8-1/8 inches 19-7/8 x 11-1/2 x 9-1/8 inches

419 x 235 x 206mm 501 x 292 x 232mm

Weight (each): 15 lbs/6.8 kg 21-1/4 lbs/9.6 kg

SYSTEM HP8B HP88F

Frequency Response (–6dB): 46Hz – 22kHz 40Hz – 22kHz

Recommended Maximum

Power Handling*: 200 watts 250 watts

Sensitivity @ 1 watt/1 meter:

91dB 93dB

Normal Impedance: 8 ohms 8 ohms

Crossover Frequency: 850Hz, 3000Hz 850Hz, 3000Hz

Woofer: 8" cast frame 2 x 8" cast frame

Midrange: 5" cast frame 5" cast frame

Tweeter: 1" pure titanium 1" pure titanium

Finish: black ash woodgrain vinyl black ash woodgrain vinyl

Dimensions (HxWxD): 23-1/8 x 11-1/2 x 10 inches 35-1/4 x 11-1/2 x 12-1/2 inches

584 x 292 x 254mm 870 x 292 x 318mm

Weight (each): 27 lbs/12.25 kg 47 lbs/21.3 kg

A Harman International Company

HP Series OM 7/22/98 12:43 PM Page 4

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels JBL Intervenants

Manuels Intervenants populaires d'autres marques

argon audio

argon audio IE20 Manuel utilisateur

Denon

Denon SC-N7 Manuel utilisateur

Gemline

Gemline Ace 3952 Manuel utilisateur

Focal

Focal ON WALL 300 Mode d’emploi

HEADRUSH

HEADRUSH Maximus HRSP 5024 Manuel utilisateur

SoundLogic

SoundLogic BCCS-6/6395 Manuel utilisateur

Peavey

Peavey DTH 218 Manuel utilisateur

Avantree

Avantree Pluto Air Manuel utilisateur

Morel

Morel Integra Series INTEGRA OVATION 4 Manuel utilisateur

Oppo

Oppo SONICA Manuel utilisateur

Bose

Bose SoundLink Wireless Music System Manuel utilisateur

Rocksteady

Rocksteady Stadium Manuel utilisateur

Bowers & Wilkins

Bowers & Wilkins 4 Manuel utilisateur

Sonance

Sonance SONOS OUTDOOR Series Manuel utilisateur

Electro-Voice

Electro-Voice EVID FM4.2 Manuel utilisateur

Pioneer

Pioneer XW-HTD630 Manuel utilisateur

Onn

Onn BWA16AA002 Manuel utilisateur

HP GL313AA - USB Speakers PC Multimedia Manuel utilisateur