jbc WS140 Manuel utilisateur
WS140
High-Temperature
Wire Stipper
INSTRUCTION MANUAL
2
Page
Index
1. Packing List ....................................................................................................................... 3
2. Features & Connections .................................................................................................. 4
3. Changing Cartridges ........................................................................................................ 5
4. Cartridge Range .............................................................................................................. 6
5. Adjustable Strip Gauge .................................................................................................. 8
6. Stripping a Wire ............................................................................................................... 8
7. Safety ................................................................................................................................. 9
8. Specifications .................................................................................................................. 12
3
Manual ............................................... 1 unit
Ref. 0025147
High-Temperature Wire Stripper ............................................... 1 unit
Metal Brush................................................1 unit
Ref. 0022793
Packing List
The following items are included:
This manual corresponds to the following reference:
WS140-A
www.jbctools.com
4
Features and Connections
Power Socket
WSU Control Unit
(not included)
Stand
Ref. WS-SB
(not included)
Stand Cable
Ref. 0 01128 3
(not included)
Equipotential Connector
USB Connector
Main Switch
Fuse
High-Temperature
Wire Stripper
Ref. WS140-A
W140 Cartridges
(not included)
WS140
WS140
WS140
WS140
WS140
WS140
WS140
WS140
5
Reference Ring
Important: It is esential to insert the cartridge till the end for a good connection. Insert the cartridge
until the reference ring touch against the Wire Stripper. Take the ring as reference and check that
both tips match.
Blade Cartridges
Alignment
Changing Cartridges
2. Inserting and Positioning1. Removing
Loosen the screws and remove the cartridges. Insert the new cartridges. Before tightening the
screw, align the tip edges and fix the cartridges
in working position.
Important: It is essential to tighten the screws
for the tool to function.
3. Fixing
Cartridge Electric
Connection Screw
www.jbctools.com
WS140
WS140
WS140
WS140
6
Accessories
To open or fix the Wire Stripper srews use the JBC Flat Screw Driver Ref. 0023074.
To manipulate the cartridges use the JBC Cartridge Extractor Pliers Ref. PLR195. More nformation at
Align cartridges with JBC pliers.Remove cartriges with JBC pliers.
Removing Inserting and Positioning
Flat Screw Driver
Cartridge Extractor
WS140
WS140
WS140
WS140
WS140
WS140
7
9 mm
0.354 in
3 mm
0.118 in
W14003F
Cartridge
Ref.
Flat Tip
3 / 0.118
Tip
mm / in
AWG
Solid
18
W14018G
Cartridge
Ref.
1,02 / 0,0402
Tip Hole ø
mm / in
AWG
Stranded
20 (7x28)
20 (19x32)
20 (42x36)
20
W14020G 0,81 / 0,0319 22 (19x34)
22
W14022G 0,64 / 0,0252 24 (7x32)
24 (19x36)
9 mm
0.354 in
3 mm
0.118 in
9 mm
0.354 in
24
W14024G 0,51 / 0,0201 26 (19x38)
26 (19x38)
26
W14026G 0,40 / 0,0157
27 (7x35)
28 (19x40)
28
W14028G 0,32 / 0,0126 30 (19x42)
30 (7x38)
34
32
30
36
W14036G
W14030G
W14032G
W14034G
0,20 / 0,0079
0,25 / 0,0098
0,13 / 0,0051
0,16 / 0,0063
36 (7x44)
34 (7x42)
32 (19x44)
x
37
W14037G
0,11 / 0,0043
x
AWG
Solid
Cartridge
Ref.
Tip Hole ø
mm / in
AWG
Stranded
3 mm
0.118 in
Cartridge Range
The WS140-A works with W140 blade cartridges. Find the model that best suits your soldering needs
on www.jbctools.com.
40
W14040G
0,08 / 0,0031
x
38
W14038G
0,10 / 0,0039
x
www.jbctools.com
WS140
WS140
WS140
WS140
8
AWG
Solid
14
16
W14016G
Cartridge
Ref.
W14014G
1,29 / 0,0508
Tip Hole ø
mm / in
1,63 / 0,0642
AWG
Stranded
16 (7x24)
18 (19x30)
W14005F
Cartridge
Ref.
Flat Tip
5 / 0.197
Tip
mm / in
10.5 mm
0.413 in
5 mm
0.197 in
10.5 mm
0.413 in
5 mm
0.197 in
blade cartridges.
WS140
WS140
WS140
WS140
WS140
WS140
WS140
WS140
WS140
WS140
9
Adjustable Strip Gauge
Adjust the strip gauge according to your stripping requirements and tighten the screw.
Strip Gauge
Stripping a Wire
1. Adjust Arm Position 2. Align Wire
Place the wire touching the strip gauge.The wheel allows to adjuste the Wire Stripper
arm position accordig to the wire diameter.
Move the wheel backward for a wider and
forward for a narrower position.
4. Remove Wire
Pull the Wire Stripper toward to stripp off
the wire end.
3. Close Cartridges
Choose cartridges according to the wire
diameter. Pinch the wire with the blades. The
pinched area will be melted by heat.
www.jbctools.com
10
Safety
Warning
- Do not touch the blade or the metal parts arround.
- Do not allow the blade be close to flammable materials.
- Keep your workplace clean and tidy. Wear appropriate protection glasses and gloves when
working to avoid personal harm.
- This appliance can be used by children over the age of eight and also persons with reduced physi-
cal, sensory or mental capabilities or lack of experience provided that they have been given adequa-
te supervision or instruction concerning use of the appliance and understand the hazards involved.
- Maintenance must not be carried out by children unless supervised.
- Place the tool on the stand when is not in use.
- Turn off the power when not in use, changing parts or storing.
Caution
- Do not use the Wire Stripper for other applications than wire stripping.
- Do not modify or customize the Wire Stripper.
- Do not hit the blade against workbench to eliminate stripped insulation debris, This behavior
would damage the blade.
- Remove power from the tool by holding the plug, not the wires.
- Be careful with the fumes produced when stripping. We recomend to use a fume extractor.
Autres manuels pour WS140
2
Table des matières
Autres manuels jbc Outils électriques
jbc
jbc ap130-a Manuel utilisateur
jbc
jbc AL250-B Manuel utilisateur
jbc
jbc WS-A Manuel utilisateur
jbc
jbc ALE250 Manuel utilisateur
jbc
jbc T210 Series Manuel utilisateur
jbc
jbc AD 8211 Manuel utilisateur
jbc
jbc NT105-A Manuel utilisateur
jbc
jbc MV-A Manuel utilisateur
jbc
jbc DSS-D Manuel utilisateur
jbc
jbc MD 2960 Manuel utilisateur
jbc
jbc TE-QD Manuel utilisateur
jbc
jbc TE Manuel utilisateur
jbc
jbc JT-QD Manuel utilisateur
jbc
jbc AP250 Manuel utilisateur
jbc
jbc 14S Manuel utilisateur
jbc
jbc ALE250 Manuel utilisateur
jbc
jbc T210 Series Manuel utilisateur
jbc
jbc AL-A Manuel utilisateur
jbc
jbc DR560-A Manuel utilisateur
jbc
jbc T210 Series Manuel utilisateur
