Jacobsen Tri-King 1900D Mode d’emploi

Safety and Operation Manual

Manuel de l’opérateur et de sécurité

Bedienings- en Veiligheidshandleiding

Betriebs- und Sicherheitshandbuch

Manuale Operativo e di Sicurezza

Tri-King Triplex Mower

RJ100012003

WARNHINWEIS:WenndieseMaschinenichtordnungsgemäß

verwendet wird, können ernsthafte Verletzungen verursacht

werden. Personen, die diese Maschine verwenden und

warten, müssen in ihrer richtigen Verwendung ausgebildet

sein, auf die Gefahren aufmerksam gemacht worden sein

und die Anleitung ganz gelesen haben, bevor sie versuchen,

die Maschine aufzustellen, zu bedienen, einzustellen oder

zu warten.

WAARSCHUWING: Bij verkeerd gebruik kan deze machine

ernstiglichamelijkletselveroorzaken.Degenendiedemachine

gebruiken en onderhouden moeten worden getraind in het

juiste gebruik ervan, worden gewaarschuwd voor de

gevaren ervan en behoren de volledige handleiding

aandachtig te lezen alvorens de machine bedrijfs-klaar te

maken, te bedienen, af te stellen en/of te onderhouden.

AVERTISSEMENT : Risque de blessures graves en cas

d’utilisation incorrecte de la machine. Les opérateurs et le

personnel d’entretien doivent être formés et conscients des

dangers encourus. Ils doivent lire avec attention le manuel

avant d’essayer de monter, d’utiliser, de régler ou maintenir la

machine.

WARNING:If incorrectly usedthis machine can causesevere

injury. Those who use and maintain this machine should be

trained in its proper use, warned of its dangers and should

read the entire manual before attempting to set up, operate,

adjust or service the machine.

2810631-ML1 (rev.A)

AVVERTENZA: Questa macchina può causare gravi infortuni

se viene utilizzata in modo errato. Prima di accingersi ad

approntare,usare,metterea punto o eseguire lamanutenzione

di questa macchina, coloro che la utilizzano ed i responsabili

della manutenzionedevonoessere addestrati all’impiego della

macchina, devono essere informati dei pericoli, e devono

leggere l’intero manuale.

67042 - 1800G Briggs & Stratton Vanguard Engine

67043 - 1900D Kubota D662-EB Engine

GB-2

CONTENTS

1 CONTENTS

1 Contents

2 Safety

2.1 Operating Safety.................................................. 3

2.2 Important Safety Notes ........................................ 4

3 Decals

3.1 Decals.................................................................. 5

4 Controls

4.1 Icons .................................................................... 6

4.2 Controls ............................................................... 8

4.3 Opening The Hood .............................................. 9

4.4 Steering Console Cover ....................................... 9

5 Operation

5.1 Daily Inspection ................................................. 10

5.2 Operator back-up System .................................. 10

5.3 Operating Procedures ....................................... 11

5.4 Starting .............................................................. 12

5.5 Stopping / Parking ............................................. 12

5.6 To Drive / Transport ........................................... 13

5.7 Hillside Operation .............................................. 13

5.8 Mowing .............................................................. 14

5.9 Towing / Trailering ............................................. 14

5.10 Daily maintenance ............................................. 15

Proposition 65 Warning

Engine exhaust from this product

contains chemicals known to the State

of California to cause cancer, birth

defects, and other reproductive harm

All information in this publication is based on information available at time of approval for printing. Textron Turf Care

and Specialty Products reserves the right to make changes at any time without notice and without incurring any

obligation.

LITHO IN U.S.A. 3-2000

SAFETY 2

GB-3

2 SAFETY

2.1 OPERATING SAFETY ______________________________________________________

1. Safety is dependent upon the awareness, concern

and prudence of those who operate or service the

equipment. Never allow minors to operate any equip-

ment.

2. It is your responsibility to read this manual and all

publications associated with this equipment (Parts

and Maintenance Manual, Engine Manual,

accessories and attachments). If the operator can

not read English it is the owner’s responsibility to

explain the material contained in this manual to

them.

3. Learn the proper use of the machine, the location

and purpose of all the controls and gauges before

you operate the equipment. Working with unfamiliar

equipment can lead to accidents.

4. Never allow anyone to operate or service the

machine or its attachments without proper training

and instructions; or while under the influence of

alcohol or drugs.

5. Wear all the necessary protective clothing and

personal safety devices to protect your head, eyes,

ears hands and feet. Operate the machine only in

daylight or in good artificial light.

6. Inspect the area where the equipment will be used.

Pick up all the debris you can find before operating.

Beware of overhead obstructions (low tree limbs,

electrical wires, etc.) and also underground

obstacles (sprinklers, pipes, tree roots, etc.) Enter a

new area cautiously. Stay alert for hidden hazards.

7. Never direct discharge of material toward

bystanders, nor allow anyone near the machine

while in operation. The owner/operator can prevent

and is responsible for injuries inflicted to

themselves, to bystanders and damage to property.

8. Never operate equipment that is not in perfect

working order or is without decals, guards, shields,

discharge deflectors or other protective devices

securely fastened in place.

9. Never disconnect or bypass any switch.

10. Carbon monoxide in the exhaust fumes can be fatal

when inhaled. Never operate the engine without

proper ventilation.

11. Fuel is highly flammable, handle with care.

12. Keep the engine clean. Allow the engine to cool

before storing and always remove the ignition key.

13. Disengage all drives and engage parking brake

before starting the engine (motor). Start the engine

only when sitting in operator’s seat, never while

standing beside the unit.

14. Equipment must comply with the latest federal,

state, and local requirements when driven or

transported on public roads.

15. Never use your hands to search for oil leaks.

Hydraulic fluid under pressure can penetrate the

skin and cause serious injury.

16. Operate the machine up and down the face of the

slopes (vertically), not across the face (horizontally).

17. To prevent tipping or loss of control, do not start or

stop suddenly; reduce speed when making sharp

turns. Use caution when changing direction on

slopes.

18. Always use the seat belt when operating tractors

equipped with a ROPS.

Never use a seat belt when operating tractors

without a ROPS.

19. Keep legs, arms and body inside the seating

compartment while the vehicle is in motion.

This machine is to be operated and maintained as specified in this manual and is intended for the professional

maintenance of specialized turf grasses. It is not intended for use on rough terrain or long grasses.

WARNING

EQUIPMENT OPERATED IMPROPERLY OR BY UNTRAINED PERSONNEL CAN BE DANGEROUS.

Familiarize yourself with the location and proper use of all controls. Inexperienced operator’s should receive

instruction from someone familiar with the equipment before being allowed to operate the machine.

2 SAFETY

GB-4

2.2 IMPORTANT SAFETY NOTES _______________________________________________

This safety alert symbol is used to alert you to potential hazards.

DANGER - Indicates an imminently hazardous situation which, if not avoided, WILL result in death or serious injury.

WARNING - Indicates a potentially hazardous situation which, if not avoided, COULD result in death or serious

injury.

CAUTION - Indicates a potentially hazardous situation which, if not avoided, MAY result in minor or moderate injury

and property damage. It may also be used to alert against unsafe practices.

For pictoral clarity, some illustrations in this manual may show shields, guards or plates open or removed. Under no

circumstances should this equipment be operated without these devices securely fastened in place

By following all instructions in this manual, you will prolong the life of your machine and maintain its maximum

efficiency. Adjustments and maintenance should always be performed by a qualified technician. If additional information

or service is needed, contact your Authorized Textron Turf Care And Specialty Products Dealer who is kept informed of

the latest methods to service this equipment and can provide prompt and efficient service.

WARNING

The operator back-up system on this tractor prevents the tractor from starting

unless the brake pedal is engaged, mower switch is off and traction pedal is

in neutral. The system will stop the engine if the operator leaves the seat

without engaging the parking brake or setting the mower switch off.

NEVER operate tractor unless the operator back-up system is working.

WARNING

1. Before leaving the operator’s position for any reason:

a. Return traction pedal to neutral.

b. Disengage all drives.

c. Lower all implements to the ground.

d. Engage parking brake.

e. Stop engine and remove the ignition key.

2. Keep hands, feet, and clothing away from moving parts. Wait for all

movement to stop before you clean, adjust or service the machine.

3. Keep the area of operation clear of all bystanders and pets.

4. Never carry passengers, unless a seat is provided for them.

5. Never operate mowing equipment without the discharge deflector

securely fastened in place.

DECALS 3

GB-5

3 DECALS

3.1 DECALS _________________________________________________________________

Read manual before operating machine.

Use caution while operating on slopes, especially when

grass is wet. Wet grass reduces traction and steering control.

• Do not use this machine on slopes greater than 16.2°.

• Always keep reels in mow position when operating on

slopes and travel at reduced speeds.

• Do not make sharp maneuvers when on slopes.

• Keep shields in place and hardware securely fastened.

• Before you clean, adjust or repair this equipment, disen-

gage all drives, stop engine and apply brake.

• Keep hands, feet and clothing away from moving parts.

• Never carry passengers.

• Keep bystanders away.

!CAUTION

3003594

Disconnect lift springs

before removing mower.

!WARNING

361947

To prevent injury, disengage all

drives, engage parking brake

and stop engine before

working on machine or

emptying grass catchers.

!DANGER

361877

To prevent burns, do not touch

muffler or muffler shield.

Temperature may exceed 150°F (66°C).

!WARNING

339237

RADIATOR IS UNDER PRESSURE. REMOVE

CAP SLOWLY TO AVOID BODILY INJURY.

!WARNING

365956

To prevent injury:

• Always connect red battery cable to the positive (+)

post FIRST and the black cable to negative (-) post

LAST

• When removing the battery, always remove, nega-

tive (-) cable FIRST and positive (+) cable LAST

• Avoid contact with battery acid.

• Keep sparks and flames away from the battery.

• Do not short circuit battery posts. Do not touch frame

or negative terminal when working on positive termi-

nal.

!DANGER

367159

To Install Battery:

1. Install battery with terminals toward rear.

2. Secure battery to support.

3. Connect positive (+) FIRST.

4. Connect negative (-) (black) LAST.

To use jumper cable:

1. Stop the engine with the good battery.

2. Connect RED cable to positive (+) terminal on good

battery and to positive (+) terminal on “discharged”

battery.

3. Connect the BLACK cable from negative (-) terminal

on good battery to frame of vehicle with discharged

battery.

4. Start the engine.

!CAUTION

367160

1. No opere esta maquina sin previo

entrenamiento, instruccion y sin haber

leido el manual de operacion.

2. Tenga todas las guardas en su lugar y

plezas bien aseguradas.

3. Neutralice todas las velocidades y

apague el motor antes de vaciar los

recolectores de pasto, darie servicio,

limplar, ajustar y destrabar la maquina.

4. Mantenga las manos, los ples y ropa

suelta lejos de plezas en movimiento.

5. No deberan transportar pasajeros si no

existe un asiento para ellos.

6. Si no sabe leer ingles, pida que aiguien

le lea las calcomanias de avisos y los

manuales de instruccion y operacion.

!PRECAUCION

340623

4 CONTROLS

GB-6

4 CONTROLS

4.1 ICONS ___________________________________________________________________

WARNING

Never attempt to drive the tractor unless you have read the Safety & Operation Manual and

know how to operate all controls correctly.

Familiarize yourself with the icons shown above and what they represent. Learn the

location and purpose of all the controls and gauges before operating this tractor.

Coolant

Temperature

Read Manual Engine Throttle

High Low

Hour Meter

Parking Brake

Engaged Disengaged

Fuel

Gasoline Diesel

Reel / 3-WD Switch

Enable Disable

Choke

Engine

Off Run Start

Glow Plug

On Off

Reel Rotation

Forward Reverse

Circuit Breaker

CONTROLS 4

GB-7

AThrottle Lever

BCircuit Breaker (Gasoline)

BGlow Plug Switch (Diesel)

CChoke (Gasoline)

CCircuit Breaker (Diesel)

DHour Meter (Gasoline)

DWater Temperature (Diesel)

EEngine Oil

FVoltmeter

GHour Meter (Diesel)

HIgnition Switch

IReel / 3-WD Switch

JBacklap Switch

KParking Brake Light

L1 Lift Pedal

L2 Lower Pedal

M1 Forward Pedal

M2 Reverse Pedal

NParking Brake

OHood Latch

PLeft Side Hood

QRight Side Hood

RConsole Latches

SCooling Air Intake

TEngine Air Filter Intake

ULight Switch (Option)

VSteering Console Cover

DEF

L1L2

4 CONTROLS

GB-8

4.2 CONTROLS ______________________________________________________________

A. Throttle Lever

Used to regulate engine speed.

B. Circuit Breaker – (Gasoline)

If the gauges or ignition system fail to operate

properly, check the circuit breaker then depress cap

to reactivate the breaker.

B. Glow Plug Switch – (Diesel)

Used to energize the glow plugs (Refer to Section

5.4).

C. Choke – (Gasoline)

Used to start a cold engine.

C. Circuit Breaker – (Diesel)

If the gauges or ignition system fail to operate

properly, check the circuit breaker then depress cap

to reactivate the breaker.

D. Hour Meter – (Gasoline)

Used to time maintenance intervals or mowing

operations. The meter operates only when the

ignition key is in the “On” position.

D. Water Temperature – (Diesel)

Indicates engine coolant temperature. Normal

operating temperature should be 185 - 195 degrees

F (85 - 91 degrees C).

E. Engine Oil

The indicator will light if engine oil pressure drops

below 7 PSI (48 kPa). Stop engine immediately,

determine the cause, and correct the problem before

resuming operation.

F. Vo l t me te r

Indicates battery condition. During normal operation

meter should never be in the red area.

G. Hour Meter – (Diesel)

Used to time maintenance intervals or mowing

operations. The meter operates only when the

ignition key is in the “On” position.

H. Ignition Switch

Used to start the engine. Remove the ignition key

when the tractor is not in use.

I. Reel / 3-WD Switch

Used to engage mowers and also select two wheel

drive or three wheel drive (2-WD or 3-WD).

a. Pull the lever upward and forward to engage

clutch and engage 3-WD mode.

b. Push switch lever down to disengage clutch and

engage 2-WD mode.

J. Backlap Switch

Used for maintenance only to hone the reels and

bedknife.

Note: The switch must be in “Forward Rotation” for

normal operation. Always remove and store the key

after backlapping.

K. Parking Brake Light

Indicates that the parking brake is engaged. Parking

brake must be disengaged before depressing traction

pedal.

L. Lift/Lower Pedal

Used to lift or lower the implements. Depress top of

pedal (L1) to lower and engage reels. Hold pedal

down, until implements are fully lowered then release

the pedal.

Push rear of pedal (L2) pedal to raise and stop reels.

Hold pedal down until implements are fully raised,

then release pedal.

M. Traction Pedal

Used to control the direction and speed of the

machine.

Slowly depress the top of the traction pedal (M1) for

forward motion or rear pedal (M2) pedal for reverse.

The pedal will return to neutral when released.

Do not depress traction pedal in either direction with

parking brake light (K) on.

N. Parking Brake Lever

Push up and forward to engage brake. Pull back and

down to disengage brake.

O. Hood Latch

Used to keep hoods closed.

P. Left Side Hood

Q. Right Side Hood

R. Console Latches

S. Cooling Air Intake

T. Engine Air Filter Intake

U. Light Switch - (Optional Kit)

V. Steering Console Cover

CONTROLS 4

GB-9

4.3 OPENING THE HOOD ______________________________________________________

The “Right” and “Left”, “Front” and “Rear” of the machine

are referenced from the operator’s right and left when

seated in the tractor’s seat in the normal operating

position.

1. To Open the Hood, unhook latch (O) on right-front

foot rest then lift entire left-side hood (P) upwards to

clear the operator’s console.

2. Stand in front of the machine and push the right end

of the hood (P) downwards as shown.

3. Pivot the hood to its full open position.

4. Lift hood (Q) straight upwards and remove from the

tractor.

5. To Close the Hood, position hood (Q) directly over

the hydro, push down and towards the radiator.

6. From the front of the machine, pivot hood (P)

upwards and to the left making sure the hood clears

the operator’s console then push downwards and

into the front retainer.

Figure 4A

4.4 STEERING CONSOLE COVER _______________________________________________

1. First open the front hood (Section 4.3).

2. To remove the console cover, lift latch (R) on both

sides and pull outwards to disengage internal lock.

3. Lift the console cover (V) straight up and off the

tractor.

Figure 4B

5 OPERATION

GB-10

5 OPERATION

5.1 DAILY INSPECTION________________________________________________________

1. Perform a visual inspection of the entire unit, look for

signs of wear, loose hardware, and missing or dam-

aged components. Check for fuel or oil leaks to

ensure connections are tight and hoses and tubes

are in good condition.

2. Check the fuel supply, radiator coolant level,

crankcase oil and air cleaner indicator. All fluids

must be at the full level mark with engine cold.

3. Make sure all mowers are adjusted to the same

cutting height.

4. Check tires for proper inflation.

5. Test the operator back-up system.

Note: For more detailed maintenance information,

adjustments and maintenance/lube charts, see the

Parts & Maintenance manual.

5.2 Operator Back-up System _________________________________________________________________

1. The operator back-up system prevents the engine

from starting unless the parking brake is engaged,

the traction pedal is in neutral and the reel/3-WD

switch is OFF. The system also stops the engine if

the operator leaves the seat with the reel/3-WD

switch ON, traction pedal out of NEUTRAL, or park-

ing brake DISENGAGED.

2. Perform each of the following tests to insure the

operator back-up system is functioning properly.

Stop the test and have the system inspected and

repaired if any of the tests fail as listed below:

●the engine does not start in test 1;

●the engine does start during tests 2,3 or 4;

●the engine continues to run during tests 5 or 6.

3. Refer to the chart below for each test and follow the

check (✔) marks across the chart. Shut engine off

between each test.

Test 1: Represents normal starting procedure. The

operator is seated, parking brake is engaged, the

operator’s feet are off the pedals, and the reel/3-WD

switch is OFF. The engine should start.

Test 2: The engine must not start if the reel/3-WD

switch is ON.

Test 3: The engine must not start if the parking brake

is DISENGAGED.

Test 4: The engine must not start if the traction pedal

is pressed.

Test 5: Start the engine in the normal manner then

turn reel/3WD switch ON and lift your weight off the

seat. ★

Test 6: Start the engine in the normal manner then

disengage parking brake and lift your weight off the

seat. ★

★ Lift your weight off seat. The engine will shut down.

CAUTION: The daily inspection should be per-

formed only when the engine is off and all fluids

are cold. Lower mowers to the ground, engage

parking brake, stop engine and remove ignition

key.

WARNING

Never operate equipment with the operator back-up

system disconnected or malfunctioning. Do not

disconnect or bypass any switch.

! !

Operator’s Back-up System Check

Test Operator

Seated

Parking

Brake

Traction Pedal

in Neutral

Reel / 3-WD

Switch

Engine

Starts

Yes No Engaged Disengaged Yes No On Off Yes No

1✔✔ ✔ ✔✔

2✔✔ ✔✔ ✔

3✔✔✔✔✔

4✔ ✔ ✔✔✔

5✔★✔✔✔

★

6✔★✔✔ ✔

★

Ce manuel convient aux modèles suivants

Table des matières

Langues :

Autres manuels Jacobsen Tondeuse à gazon

Jacobsen

Jacobsen 70528 Manuel utilisateur

Jacobsen

Jacobsen Super LF 1880 Manuel utilisateur

Jacobsen

Jacobsen ZB Series Mode d’emploi

Jacobsen

Jacobsen 67868 Manuel utilisateur

Jacobsen

Jacobsen Ransomes HR 6010 Manuel utilisateur

Jacobsen

Jacobsen 69168 - Turfcat T628D Manuel utilisateur

Jacobsen

Jacobsen Eclipse 2 Manuel utilisateur

Jacobsen

Jacobsen Eclipse 118 Manuel utilisateur

Jacobsen

Jacobsen HR 9016 Turbo Mode d’emploi

Jacobsen

Jacobsen HR-9016 Turbo Manuel utilisateur

Jacobsen

Jacobsen 62282 Manuel utilisateur

Jacobsen

Jacobsen AR-522 jossa ROPS Manuel utilisateur

Jacobsen

Jacobsen AR3 Mode d’emploi

Jacobsen

Jacobsen R-311 Mode d’emploi

Jacobsen

Jacobsen HR 4600 Turbo 67862 Manuel utilisateur

Jacobsen

Jacobsen Super LF 1880 Fairway 67923 Manuel utilisateur

Jacobsen

Jacobsen Fairway 67978 Manuel utilisateur

Jacobsen

Jacobsen AR3 EF Series Manuel utilisateur

Jacobsen

Jacobsen T422D Turfcat Manuel utilisateur

Jacobsen

Jacobsen AR-522 jossa ROPS Manuel utilisateur

Jacobsen

Jacobsen HR 9016 Turbo Manuel utilisateur

Jacobsen

Jacobsen AR 250 Turbo Mode d’emploi

Jacobsen

Jacobsen Greens King IV Manuel utilisateur

Jacobsen

Jacobsen Sand Scorpion Mode d’emploi

Manuels Tondeuse à gazon populaires d'autres marques

RHINO

RHINO 1958 Manuel utilisateur

Wolf Garten

Wolf Garten Compact plus 40 B Manuel utilisateur

Cub Cadet

Cub Cadet LTX 1045 Manuel utilisateur

Craftsman

Craftsman 917.378461 Manuel utilisateur

GGP ITALY SPA

GGP ITALY SPA CR/CS 434 SERIES Manuel utilisateur

Challenge

Challenge CH18V2 Instructions de fonctionnement

TALEN TOOLS

TALEN TOOLS AVR HGM30 Manuel utilisateur

DEWEZE

DEWEZE ATM-725 Manuel d'utilisation

Weed Eater

Weed Eater 180083 Manuel utilisateur

Husqvarna

Husqvarna Poulan Pro PP185A42 Manuel utilisateur

Better Outdoor Products

Better Outdoor Products Quick Series Manuel utilisateur

Cub Cadet

Cub Cadet 23HP Z-Force 60 Manuel d'utilisation

MTD

MTD 795, 792, 791, 790 Manuel utilisateur

Toro

Toro Groundsmaster 3505-D Manuel utilisateur

Dennis

Dennis FT 610 Manuel utilisateur

AIRFORCE

AIRFORCE F-15 Gen 3 Manuel utilisateur

MTD

MTD 126-220-000 Manuel utilisateur

Toro

Toro 74806 Manuel utilisateur