Jabra Pro 9450 Mono Flex Manuel utilisateur

Jabra Pro 9450 Mono Flex

How to connect my Jabra PRO 9450 with Alcatel IP Touch

4028 EE, 4038 EE, 4068 EE

Prerequisite:

Jabra PRO 9450 + Jabra LINK 14201-20

In combination with one of the following phones:

IP Touch 4028 EE

IP Touch 4038 EE

IP Touch 4068 EE

EE = Extended Edition

Connection:

1. Insert the RJ9 to RJ9 connection cable supplied with the Jabra PRO

94x0 into the socket marked with the "phone" on your Jabra PRO 94x0

base and the other end into the socket marked with a "phone" on the

EHS adapter

2. Now connect the end of the RJ45 to RJ45 connection cable (EHS

adapter) marked in "red" to the socket marked "AUX" on the EHS

adapter to the "AUX" socket on your Jabra PRO 94x0 base.

3. With the cable marked white D, connect the Headset / Handset socket

on your Jabra LINK EHS Adapter to the 3.5 mm headset socket on the

side of your desk phone.

4. Now connect the RJ12 to RJ12 connection cable marked orange and

"A" to the socket of the EHS adapter identified with "COM" as well as

with the "bell" socket on your phone.

Please be aware that the phone will not be fully functional until the

24/11/2022 16:30

https://www.apac.jabra.com/supportpages/jabra-pro-9450/9450-25-707-

103/faq/8df8fc6e-dbbb-43d7-ae3d-d33e7ff4bbf7

Page 1 of 4

coloured markings for all cables have been connected to the EHS adapter.

See photo.

You now have the option of setting up the headset on your phone via the

automatic or manual configuration.

Automatic configuration:

To start the automatic configuration, ask someone to call you on this

phone and wait at least 10 seconds before taking the call. The appropriate

EHS mode should now be installed.

If the automatic configuration has not worked, please select DHSG mode

manually.

Base setup:

Set the phone set-up switch to position "A".

24/11/2022 16:30

https://www.apac.jabra.com/supportpages/jabra-pro-9450/9450-25-707-

103/faq/8df8fc6e-dbbb-43d7-ae3d-d33e7ff4bbf7

Page 2 of 4

Microphone level setup:

Remove the cover from the base of the Jabra PRO 9450 and make a call

with the headset, to a colleague for example. If you are too loud or too

quiet to the person you are calling, please use the volume adjuster until

you achieve the optimum volume level.

Phone setup with system software version 9.xx and higher:

Settings on the phone are no longer required to use the headset. After

correctly adapting the phone plug, a headset symbol should now appear in

the "phone display". Should the headset symbol not appear, please check

the following settings:

Menu > Settings > Phone > Phone plug > Activate/select headset.

Phone setup with system software version below 9.xx:

Important: The "Force Headset" function on the phone must not be

activated as otherwise it will not be possible to receive external calls.

Menu > Settings > Phone > Phone plug > Force headset OFF.

Menu > Settings > Phone > Socket > Activate headset.

Dial tone transfer / phone setup:

Important: The dial tone signal in the headset is only transferred if one of

24/11/2022 16:30

https://www.apac.jabra.com/supportpages/jabra-pro-9450/9450-25-707-

103/faq/8df8fc6e-dbbb-43d7-ae3d-d33e7ff4bbf7

Page 3 of 4

the following ring tones has been selected on your phone Standard /

Classic / Cold River / Dooing-Dooing. > Menu > Settings > Dial tone >

Internal / External

In the event that you still do not have a dial tone signal transfer despite

setting the correct ring tone, check the following settings:

Menu > Settings > Phone > Internal/External > other options

No tone, progressive, bleep tones > all items must be set to "OFF".

24/11/2022 16:30

https://www.apac.jabra.com/supportpages/jabra-pro-9450/9450-25-707-

103/faq/8df8fc6e-dbbb-43d7-ae3d-d33e7ff4bbf7

Page 4 of 4

Table des matières

Autres manuels Jabra casque

Jabra

Jabra PRO 9460 - PRO 9460-DUO Manuel utilisateur

Jabra

Jabra EASYGO Manuel utilisateur

Jabra

Jabra BT 800 Manuel utilisateur

Jabra

Jabra BT110 - Headset - Over-the-ear Manuel utilisateur

Jabra

Jabra Engage 75 Manuel utilisateur

Jabra

Jabra BT2035 Manuel d'instructions

Jabra

Jabra GO 6470 Manuel utilisateur

Jabra

Jabra BT325s Manuel utilisateur

Jabra

Jabra GN9330 - Headset - Over-the-ear Manuel d'instructions et de sécurité

Jabra

Jabra GN2000 - DATASHEET 3 Manuel utilisateur

Jabra

Jabra GN9330e - USB - Headset Manuel utilisateur

Jabra

Jabra BT2080 - Headset - Ear-bud Manuel utilisateur

Jabra

Jabra GN9350 - Headset - Convertible Manuel d'utilisation

Jabra

Jabra BT650S Manuel utilisateur

Jabra

Jabra BT2080 - Headset - Ear-bud Manuel utilisateur

Jabra

Jabra BT2020 - Headset - Over-the-ear Manuel utilisateur

Jabra

Jabra BT5020 - ANNEXE 641 Manuel utilisateur

Jabra

Jabra GO 6470 Manuel utilisateur

Jabra

Jabra GN9120 Flex Manuel utilisateur

Jabra

Jabra Evolve2 40 Manuel utilisateur

Jabra

Jabra Storm Manuel utilisateur

Jabra

Jabra SoleMate Mini Fiche technique

Jabra

Jabra Engage 65 Manuel utilisateur

Jabra

Jabra GN9330 - Headset - Over-the-ear Manuel utilisateur

Manuels casque populaires d'autres marques

Sena

Sena SMH10 Manuel utilisateur

IASUS

IASUS Stealth IA-NT4-BASIC-BT Manuel utilisateur

Sennheiser

Sennheiser EPOS ADAPT 230 Manuel utilisateur

Doro

Doro Flexus HS2005 Manuel utilisateur

GE 98971 Manuel utilisateur

Hama

Hama 00184070 Manuel utilisateur

Plantronics

Plantronics Blackwire 3200 Series Manuel utilisateur

Blue Tiger

Blue Tiger Advantage PLUS Manuel utilisateur

Jawbone

Jawbone Icon Manuel utilisateur

Roxcore

Roxcore Flow A+ Manuel utilisateur

Turtle Beach

Turtle Beach XP 510 Manuel utilisateur

Philips

Philips SHB6101 Manuel utilisateur

HyperX

HyperX HyperX Cloud Flight Manuel utilisateur

Bose

Bose MIE2 Mobile Manuel utilisateur

HyperX

HyperX cloud ii Manuel utilisateur

Southwing

Southwing SA505 Manuel utilisateur

Plantronics

Plantronics VOYAGER 520 Manuel utilisateur

Blueant

Blueant X5i Manuel utilisateur