Jabra PRO 920 Guide de démarrage rapide

Autres manuels pour PRO 920

9

Ce manuel convient aux modèles suivants

1

Table des matières

Autres manuels Jabra casque

Jabra

Jabra GN 9120 LR Manuel utilisateur

Jabra

Jabra Evolve2 75 Manuel utilisateur

Jabra

Jabra BIZ 620 Manuel utilisateur

Jabra

Jabra SPORT COACH Manuel utilisateur

Jabra

Jabra BT8040 Multiuse Manuel utilisateur

Jabra

Jabra GN9120 Flex Manuel utilisateur

Jabra

Jabra GN1000 Manuel utilisateur

Jabra

Jabra Engage 50 II Manuel utilisateur

Jabra

Jabra Evolve2 40 Manuel utilisateur

Jabra

Jabra GN2000 - DATASHEET 3 Manuel utilisateur

Jabra

Jabra BT 320S Manuel d'installation et d'exploitation

Jabra

Jabra BIZ 360 Manuel utilisateur

Jabra

Jabra STONE Guide de référence

Jabra

Jabra Engage 65 Convertible Manuel utilisateur

Jabra

Jabra STONE Manuel utilisateur

Jabra

Jabra Elite Sport OTE050 Manuel utilisateur

Jabra

Jabra TALK 15 SE Fiche technique

Jabra

Jabra BT130 - Headset - Over-the-ear Manuel utilisateur

Jabra

Jabra BT2047 Manuel utilisateur

Jabra

Jabra GN1900 - SCHEMA Manuel utilisateur

Jabra

Jabra BT 320S Manuel utilisateur

Jabra

Jabra Stone2 Manuel utilisateur

Jabra

Jabra ACTIVE HSC006 Manuel utilisateur

Jabra

Jabra PRO 925 Manuel utilisateur

Manuels casque populaires d'autres marques

Sena

Sena SMH10 Manuel utilisateur

IASUS

IASUS Stealth IA-NT4-BASIC-BT Manuel utilisateur

Sennheiser

Sennheiser EPOS ADAPT 230 Manuel utilisateur

Doro

Doro Flexus HS2005 Manuel utilisateur

GE

GE 98971 Manuel utilisateur

Hama

Hama 00184070 Manuel utilisateur

Plantronics

Plantronics Blackwire 3200 Series Manuel utilisateur

Blue Tiger

Blue Tiger Advantage PLUS Manuel utilisateur

Jawbone

Jawbone Icon Manuel utilisateur

Roxcore

Roxcore Flow A+ Manuel utilisateur

Turtle Beach

Turtle Beach XP 510 Manuel utilisateur

Philips

Philips SHB6101 Manuel utilisateur

HyperX

HyperX HyperX Cloud Flight Manuel utilisateur

Bose

Bose MIE2 Mobile Manuel utilisateur

HyperX

HyperX cloud ii Manuel utilisateur

Southwing

Southwing SA505 Manuel utilisateur

Plantronics

Plantronics VOYAGER 520 Manuel utilisateur

Blueant

Blueant X5i Manuel utilisateur

AAAHeadsets Installation Note:

How to connect my Jabra PRO 920 with Alcatel Touch 4028, 4038

Prerequisite:

Jabra PRO 920 + Jabra LINK 14201-09

In combination with one of the following phones:

Touch 4028

Touch 4038

Connection:

2-sided end:

Insert the RJ45 plug (red band) into the red socket marked with "AUX" and the RJ10 plug

(blue band) into the blue socket marked with the “phone” symbol of the Jabra PRO 920 base.

2-fold Y-coupling end:

Insert the 3.5 mm audio jack into the headset interface and the RJ12 plug into the bell socket

of the phone. The extra connector socket on the Y-coupling remains free for connection to an

IP phone.

Now you can setup the headset for your phone with either the automatic or manual

configuration.

Automatic configuration:

To start the automatic configuration, please let someone call you on this phone; wait at least

10 seconds before you pick up the phone. Now the appropriate EHS mode should be set up.

If the automatic configuration does not work, please manually select the MSH mode (using

the voice prompts detailed in the Jabra PRO 920 User Manual Section 7.5).

Base setup:

Set the phone setup switch to position "A".

Microphone volume setting:

Put on the headset and call a colleague, for example.

Now you can select the desired microphone volume using the +/-button.

No settings are usually required on the phone to use a headset. Following the Jabra LINK

3.5mm plug being inserted into the audio jack, a headset symbol should appear in the “Phone

display”.

If the headset symbol does not appear, please check that your phone settings are as

follows:

Phone setup with system software 9.xx and higher

Menu> Settings> Phone> Jack> Headset Activate/Select

Phone setup with system software version below version 9.xx:

Important: The “Force Headset” function must not be activated on the phone, as otherwise it

will not be possible to accept external calls.

Menu> Settings> Phone> Jack>Force Headset OFF

Menu> Settings> Phone> Socket > Activate Headset

Ringtone transfer / phone setup:

Important: The dial tone signal in the headset is only transmitted if one of the following

ringtones is used, e.g., Standard/ Classic / Cold River / Dooing-Dooing. > Menu> Settings>

Dial Tone > Internal / External

Should the dial tone signal transfer not work although you have setup the correct ringtone,

please check the following settings:

Menu > Settings > Phone > Internal/External, more options

No sound, Progressive, Beeps> all points must be set to "OFF".

Calls being made via the headset can be connected / forwarded as follows:

Dial the phone number > "Forward" will now appear in the phone display > now press on to

the appropriate function key next to the phone display > thereafter you must end the call with

the button marked "Handset"