ITOX G4V100-P Manuel utilisateur

G4V100-P

G4V100-M

System Board

User’s Manual

935-G4V101-000(G)

A80420546

This publication contains information that is protected by copyright.

No part of it may be reproduced in any form or by any means or

used to make any transformation/adaptation without the prior

written permission from the copyright holders.

This publication is provided for informational purposes only. The

manufacturer makes no representations or warranties with respect to

the contents or use of this manual and specifically disclaims any

express or implied warranties of merchantability or fitness for any

particular purpose.The user will assume the entire risk of the use or

the results of the use of this document. Further, the manufacturer

reserves the right to revise this publication and make changes to its

contents at any time, without obligation to notify any person or

entity of such revisions or changes.

Trademarks

Product names or trademarks appearing in this manual are for

identification purpose only and are the properties of the respective

owners.

Caution

To avoid damage to the system:

• Use the correct AC input voltage range.....

To reduce the risk of electric shock:

• Unplug the power cord before removing the system chassis

cover for installation or servicing. After installation or servicing,

cover the system chassis before plugging the power cord.

Battery:

• Danger of explosion if battery incorrectly replaced.

• Replace only with the same or equivalent type recommend

the manufacturer.

• Dispose of used batteries according to the battery manufactur-

er’s

instructions.

FCC and DOC Statement on Class B

This equipment has been tested and found to comply with the limits

for a Class B digital device, pursuant to Part 15 of the FCC rules.

These limits are designed to provide reasonable protection against

harmful interference when the equipment is operated in a residential

installation. This equipment generates, uses and can radiate radio

frequency energy and, if not installed and used in accordance with

the instruction manual, may cause harmful interference to radio

communications. However, there is no guarantee that interference

will not occur in a particular installation. If this equipment does cause

harmful interference to radio or television reception, which can be

determined by turning the equipment off and on, the user is

encouraged to try to correct the interference by one or more of the

following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and the receiver.

• Connect the equipment into an outlet on a circuit different from

that to which the receiver is connected.

• Consult the dealer or an experienced radio TV technician for

help.

Notice:

1. The changes or modifications not expressly approved by the

party responsible for compliance could void the user's authority

to operate the equipment.

2. Shielded interface cables must be used in order to comply with

the emission limits.

Notice

An electronic file of this manual is included in the CD. To view the

user’s manual in the CD, insert the CD into a CD-ROM drive. The

autorun screen (Main Board Utility CD) will appear. Click “User’s

Manual” on the main menu.

Table of Contents

Chapter 1 - Introduction

1.1 Features.................................................................................................................................

1.2 Special Features of the System Board.....................................................

1.3 Package Checklist.........................................................................................................

Chapter 2 - Hardware Installation

2.1 System Board Layout ...........................................................................................

2.2 System Memory...........................................................................................................

2.3 CPU........................................................................................................................................

2.4 Jumper Settings.............................................................................................................

2.5 Rear Panel I/O Ports..............................................................................................

2.6 I/O Connectors...........................................................................................................

Chapter 3 - BIOS Setup

3.1 Award BIOS Setup Utility....................................................................................

3.5 Updating the BIOS.....................................................................................................

Chapter 4 - Supported Softwares

4.1 Drivers, Utilities and Software Applications.........................................

4.2 Installation Notes..........................................................................................................

105

Introduction

107

110

112

Appendix A - Watchdog Timer

A.1 Watchdog Timer.........................................................................................................

Appendix B - Using the Suspend to RAM

Function

B1 Using the Suspend to RAM Function..................................................

Appendix C - System Error Messages

C.1 POST Beep.....................................................................................................................

C.2 Error Messages............................................................................................................

Appendix D - Troubleshooting

D.1 Troubleshooting Checklist.................................................................................

106

Introduction

Chapter 1 - Introduction

1.1 Features

Processor

G4V100-P

• Intel®Pentium®4 Processor with Hyper-Threading Technology

- 533MHz system data bus

• Intel®Pentium®4 Northwood processor

- 533MHz/400MHz system data bus

• Intel®Celeron®Northwood processor

- 400MHz system data bus

G4V100-M

• Intel®Pentium®4 Processor-M (478-pin)

- 400MHz system data bus

• Supplies IMVP-III voltage current tolerances at VID=1.30V

maximum performance mode

Chipset

• Intel®845GV chipset

- Intel®845GV Graphics Memory Controller Hub (GMCH)

- Intel®82801DB I/O Controller Hub (ICH4)

System Memory

• Two 184-pin DDR SDRAM DIMM sockets

• 2.5V unbuffered PC1600 (DDR200), PC2100 (DDR266) or

PC2700 (DDR333) DDR SDRAM DIMM

• Supports maximum of 2GB system memory using 64Mbit,

128Mbit, 256Mbit or 512Mbit technology

- Double-sided x16 DDR SDRAM DIMM is not supported

BIOS

• Award BIOS, Windows®98SE/2000/ME/XP Plug and Play

compatible

• Supports SCSI sequential boot-up

• Supports DMI 2.0 function

• 4Mbit flash memory

Energy Efficient Design

• Supports ACPI specification and OS Directed Power

Management

Introduction

• Supports ACPI STR (Suspend to RAM) function

• Wake-On-Events include:

- Wake-On-PS/2 Keyboard/Mouse

- Wake-On-USB Keyboard/Mouse

- Wake-On-LAN

- Wake-On-Ring

- RTC timer to power-on the system

• System power management supported

• CPU stopped clock control

• Hardware supports SMI green mode

• Microsoft®/Intel®APM 1.2 compliant

• Soft Power supported - ACPI v1.0a specification

• AC power failure recovery

Damage Free Intelligence

• Monitors CPU/system temperature and overheat alarm

• Monitors 5VSB(V)/VBAT(V)/1.5V/3.3V/5V/±12V/CPU(V)

voltages and failure alarm

• Monitors CPU/chassis/2nd fan speed and failure alarm

• Read back capability that displays temperature, voltage and fan

speed

• Watchdog timer function

Onboard Graphics Features

• Graphics memory

- Shares 512K/1MB/8MB of the system memory in DOS

mode

- Uses Dynamic Video Memory Technology (DVMT) in

Windows mode

• Graphics controller

- Core frequency of 200MHz

- 350MHz integrated 24-bit RAMDAC

- Analog display up to 2048x1536 @ 60Hz refresh

- 3D setup and render engine - Discrete, Triangles, Strips and

fans

- Per pixel perspective corrected texture mapping

- Software DVD at 30fps, full screen

• 2D graphics features

- Optimized 256-bit BLT engine

- 32-bit alpha blended cursor

- Programmable 3-color transparent cursor

Introduction

• 3D graphics features

- 200 megapixels/sec fill rate

- Maximum 3D resolution: 1600x1200x32 @ 85Hz

- Flat and Gouraud shading

- 16- and 24-bit Z-buffering and 16- and 24-bit W-buffering

- Vertex and programmable pixel fogging and

atmospheric effects

- Double and triple render buffer

• Software drivers

- Windows®98SE/2000/ME/XP

- Windows NT®4.0

LVDS Transmitter

• Chrontel CH7017

• Supports scale up to 1600x1200 pixels

• 18-bit and 24-bit outputs

• 2D dither engine

• Support for second CRT DAC bypass mode

• Dual LVDS supporting pixel rates up to 330Mpixels/sec when

both 12-bit input ports are ganged together

Onboard Audio Features

• Realtek ALC202A

• 18-bit stereo full-duplex codec with independent variable

sampling rate

• High quality differential CD input

• True stereo line level outputs

• S/PDIF-out interface

• 2-channel audio output

Onboard LAN Features

• Uses Intel 82562EM fast ethernet controller

• IEEE 802.3, 10BASE-T/100BASE-TX compliant physical layer

interface

• IEEE 802.3u Auto-Negotiation

• Digital Adaptive Equalization control

• Link status interrupt capability

• 10BASE-T auto-polarity correction

• Alert on LAN functionality

• LAN Connect I/F

• 1:1 transmit transformer ratio support

• Automatic detection of “unplugged mode”

Introduction

IDE Interface

• Supports ATA/33, ATA/66 and ATA/100 hard drives

• PIO Mode 4 Enhanced IDE (data transfer rate up to 14MB/sec.)

Processor Socket

• Socket 478

Rear Panel I/O Ports

• 2 USB 2.0/1.1 ports

• 1 RJ45 LAN port

• 2 DB-9 serial ports

• 1 DB-15 VGA port

• 1 DB-25 parallel port

• 1 mini-DIN-6 PS/2 mouse port

• 1 mini-DIN-6 PS/2 keyboard port

• 3 audio jacks: line-out, line-in and mic-in

I/O Connectors

• 2 connectors for 4 additional external USB 2.0/1.1 ports

• 1 connector for COM 3 (RS232 or LVDS)

• 1 connector for COM 4 (RS232 or RS485)

• 1 44-pin connector for LVDS LCD panel

• 1 LCD/Inverter power connector

• 1 LCD brightness control connector

• 1 front audio connector for line-out and mic-in jacks

• 1 CD-in internal audio connector

• 1 S/PDIF-out connector

• 1 IrDA connector

• 1 40-pin IDE 1 connector for 3.5" HDD

• 1 44-pin IDE 2 connector for 2.5" HDD

• 1 floppy connector (FPC connector type)

• 2 ATX power supply connectors

• 1 Wake-On-LAN connector

• 1 chassis open connector

• 3 fan connectors

Expansion Slots

• 1 PCI slot for PCI expansion card or customized riser card for 1,

2 or 3 PCI slots expansion (for low profile PCI card only)

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels ITOX Carte mère

ITOX

ITOX G5M100-N Manuel utilisateur

ITOX

ITOX G4M300-M12 Manuel utilisateur

ITOX

ITOX G4M300-P Manuel utilisateur

ITOX

ITOX PT330 series Manuel utilisateur

ITOX

ITOX G4V621-N Manuel utilisateur

ITOX

ITOX ETX620-B Manuel utilisateur

ITOX

ITOX SR960-N Manuel utilisateur

ITOX

ITOX NP101-D16C Manuel utilisateur

ITOX

ITOX GCB60-BX Manuel utilisateur

ITOX

ITOX ML936-B Series Manuel utilisateur

ITOX

ITOX PT630-NRM Manuel utilisateur

ITOX

ITOX G4E600-D Manuel utilisateur

ITOX

ITOX G4V620-N Manuel utilisateur

Manuels Carte mère populaires d'autres marques

DFI

DFI SD170 Manuel utilisateur

ASROCK

ASROCK ROMED8-2T Manuel utilisateur

Asus

Asus P2L97A Manuel utilisateur

Winmate

Winmate IC70 Manuel utilisateur

Asus

Asus MES-B Manuel utilisateur

Grantech

Grantech SYS8F377VGGA-3OMN Manuel utilisateur

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Manuel utilisateur

Gigabyte

Gigabyte GA-9IVDT Manuel utilisateur

Texas Instruments

Texas Instruments ADS8372EVM Manuel utilisateur

Commell

Commell MS-C73 Manuel utilisateur

IBT Technologies

IBT Technologies MB860 Manuel utilisateur

Nvidia

Nvidia TEGRA DG-04927-001_V01 Manuel utilisateur

Biostar

Biostar M7VIT Bravo Instructions d'utilisation et d'installation

Intel

Intel D33217CK Manuel utilisateur

Asus

Asus F1A55-M LX PLUS R2.0 Manuel utilisateur

EPC

EPC EPC9147C Manuel utilisateur

Asus

Asus EX-B760M-V5 D4 Manuel utilisateur

EPOX

EPOX MU-8KHA0010 Manuel utilisateur