iRoom fixDock mini Manuel utilisateur
MANUAL
fixDock-mini/-iPad10/11/12.9
EnglishDeutsch
intelligence. on.
iRoom fixDock 2020 Lineart
iRoom fixDock with device
iRoom fixDock without device
iRoom fixDock simple
Page 2
intelligence. on.
Package Content
• fixDock (1x)
• fixDock Back box (1x)
• Cardboard Frame (1x)
• Aluminium Frame (1x)
• Mounting Screw (4x)
• Heavy Duty Rubber Band (2x)
• Installation Instructions (1x)
• Sucker (1x)
• Power Supply High or Low voltage (1x)
• Adapter USB-A to USB-C (1x) - only fincluded with fixDock models
for iPads with a USB-C charging port
Introduction
Thank you for purchasing iRoom‘s fixDock (in-wall docking station).
This MANUAL is designed to guide you through the hardware installation.
The warranty terms are also included in this MANUAL.
For FAQ‘s or user manuals in other languages, please visit: www.iRoomiO.com
ENGLISH
Page 3
for iRoom‘s fixDock
MANUAL
Important Information
All connection and installation work must be conducted by certified electricians in compliance with the general rules and directives for electri-
cal installations. The fixDock has a smooth and shiny surface which is prone to scratches. Handle with care to avoid damage. We recommend
wearing soft cotton wool gloves during installation.
• Select a suitable place to mount the device.
• Do not mount or use the fixDock in wet or moist environments.
• The place chosen to mount the device must provide enough recess depth to allow use of the back box and the entry of the leads.
• Mount the device in a place that enables reception of a suitably strong Wi-Fi signal so that the iPad has Internet connectivity when it is
docked.
General Information
The f ixDock can be installed both vertically and horizontally.
It is important that the wall mounting surface is level and smooth, so the back box can be fixed without deformation.
During installation the protective card has to be placed into the back box.
Description of Function
The fixDock may only be used with the flush-mounted back box. Operation without the back box will void the warranty.
Page 4
intelligence. on.
Preparing the Power Connection - Option 1: High Voltage
Connect the AC/USB converter to a 110-240 VAC power line and put it in the back box of the docking station.
This option requires a certified electrician for installation!
ENGLISH
Page 5
for iRoom‘s fixDock
MANUAL
Preparing the Power Connection - Option 2: Low Voltage
1. Plug the included
primary power adapter
110-240 VAC to 36 VDC
into a power outlet.
2. If needed, run a 2-wire extension
cable (not included) from the 36VDC
output to the next converter.
3. Put the second converter (included) in the back box and
connect the extension cable from the primary power adapter.
CAUTION: Determine correct polarity!
Page 6
intelligence. on.
Installation in Masonry
1. Attach the cardboard frame (4) to the back box (3) and
bolt them together with the included mounting screws (1)
(3 x 20mm)
2. Prepare a recess in the wall. You will find the cut-out dimensions
for your fixDock model on page 6.
3. Remove the break-out for the cable exits on the back box
4. Feed in the power leads through the hole in the back box. Use a
suitable cable grip sleeve.
5. Place the back box in the recess. Do not deform the
back box.
6. Plaster in the back box and ensure a straight, flush wall and dis-
tortion-free installation of the back box. Otherwise it may cause
mechanical problems.
7. After finishing plasterwork and wall finishing remove the card-
board frame and attach the aluminum frame (2)!
2
3
4
1
ENGLISH
Page 7
for iRoom‘s fixDock
MANUAL
Installation in Cavity Walls
1. Attach the aluminum frame (2) to the back box (3) and bolt
together the frame and the back box with the included mounting
screws (1) (3 x 20mm)
2. Prepare a recess in the wall. You will find the cut-out dimensions
for your fixDock model on page 6.
3. Remove the break-out for the cable exits on the back box
4. Feed in the power leads through the hole in the back box . Use a
suitable cable grip sleeve.
5. Place the back box in the recess. Do not deform the
back box.
6. Cut some small thread gaps in the safety strips that cover the
recess spaces for the mounting clips. Do not remove the safety
strips! Feed the mounting clips into the recesses and screw
them tight. Ensure a straight, flush wall and distortion-free
installation of the flush box. Otherwise it may cause mechanical
problems.
Mounting
1. Connect the original Apple charging cable to the USB port of the
included 110-240 VAC to 36 VDC power supply.
2. Connect the iPad to charging cable. If you install an iPad with
USB-C charging port use the included USB-A to USB-C adapter.
3. Fix the iPad to the backside of the glass bezel using the included
rubber bands - see below. Pay attention to correct positioning of
the rubber band clips.
4. Push the fixDock into the aluminium frame. Make sure you do
not damage the power leads.
Ensure a proper locking of the magnetic mounting system.
5. Switch on main power supply.
6. To remove the dock from the aluminium frame use the included
sucker.
Rubber Band Clips
Page 8
intelligence. on.
Specifications iRoom’s fixDock
Type fixDock-mini / fixDock-iPad10 / fixDock-iPad11 / fixDock-iPad12.9
Dimensions fixDock-mini (WxHxD) 284mm x 194mm x 90mm / 11.1“ x 7.6“ x 3.5“
Cut-Out Dimensions fixDock-mini (WxHxD) 275mm x 176mm x 90mm / 10.8“ x 6.9“ x 3.5“
Dimensions fixDock-iPad10 & 11 (WxHxD) 315mm x 226mm x 78mm / 12.4“ x 8.9“ x 3.1“
Cut-Out Dimensions fixDock-iPad10 & 11 (WxHxD) 305mm x 215mm x 78mm / 12.0“ x 8.5“ x 3.1“
Dimensions fixDock-iPad12.9 (WxHxD) 395mm x 330mm x 83mm / 15.6“ x 13.0“ x 3.3“
Cut-Out Dimensions fixDock-iPad12.9 (WxHxD) 360mm x 295mm x 83mm / 14.2“ x 11.6“ x 3.3“
Function Description Store & charge the iPad
Low Voltage Power Supply Primary: 100-240VAC to 36 VDC 1A. Secondary: 8-52 VDC to USB 5VDC/2A
High Voltage Power Supply Power Supply 100-240VAC to USB 5VDC/2A
Recommended Accessory (not included) iRoom‘s fixDock security-kit
Operating Temperature 0 - 35°C or 32 - 95°F
Operating Humidity 20% - 90% RH non-condensing
Cleaning
The product requires no special care, but only a regular cleaning of the glass. Do not use any abrasive/harsh cleaners
and unplug power supply before cleaning. For general cleaning of the surfaces please use a soft cloth with screen
cleaner. If possible frequently change the cloth so that no dust particles get stuck in the towel causing scratches.
!
ENGLISH
Page 9
for iRoom‘s fixDock
MANUAL
Electrical Safety Information
1.) Compliance is required with respect to voltage, frequency, and current requirements indicated on the manufacturer’s label. Connection to a
different power source than those specified may result in improper operation, damage to the equipment or pose a fire hazard if the limita-
tions are not followed.
2.) There are no operator serviceable parts inside this equipment. Service should be provided only by an authorized
service technician.
Protection against Theft
iRoom’s fixDock security kit secures the iPad through a glue-on plate that‘s connected to a wires rope. However, the
fixDock security kit does not provide any protection against theft. Unauthorized and/or forceful removal of the iPad
cannot be prevented. iRoom GmbH does not accept any liability for the theft of an iPad!
Limited Warranty
iRoom GmbH warrants that the product(s) furnished hereunder shall be free from defects in material and workmanship for a period of two (2)
years from the date of purchase made by the original end-customer or for a period of 3 years from the date of shipment by iRoom GmbH under
normal use and operation.
iRoom‘s GmbH sole and exclusive obligation and liability under the foregoing warranty shall be for iRoom GmbH, at its discretion, to repair or
replace any product that fails to conform to the above warranty during the above warranty period. The expense of removal and reinstallation of
any product is not included in this warranty. The warranty period of any repaired or replaced product shall not extend beyond its original term.
fixDock security-kit
(sold separately)
Page 10
intelligence. on.
Returns
No Products will be accepted for replacement or repair without obtaining a Return Materials Authorization (RMA) number from iRoom GmbH
or during the warranty period, and the Products being received at iRoom GmbH facility freight prepaid in accordance with the RMA process
of iRoom GmbH. Products returned without an RMA number will not be processed and will be returned freight collect or subject to disposal.
Information on the RMA process and obtaining an RMA number can be found at: www.iRoomiO.com/support/warranty.
Warranty Conditions
The above warranty does not apply if the product:
1.) has been modified and/or altered, or an addition made thereto, except by iRoom GmbH, or iRoom GmbH
authorized representatives, or as approved by iRoom GmbH in writing;
2.) has been painted, rebranded or physically modified in any way;
3.) has been damaged due to errors or defects in cabling;
4.) has been subjected to misuse, abuse, negligence, abnormal physical, electromagnetic or electrical stress,
including lightning strikes, or accident.
5.) has been damaged or impaired as a result of using third party firmware;
6.) has no original serial number label, or is missing any other original label(s);
7.) has not been received by iRoom GmbH within 30 days of issuance of the RMA.
In addition, the above warranty shall apply only if: the product has been properly installed and used at all times in
accordance, and in all material respects, with the applicable Product documentation.
Autres manuels pour fixDock mini
1
Ce manuel convient aux modèles suivants
3
Table des matières
Langues :
Autres manuels iRoom Station d'accueil
iRoom
iRoom iDock Landscape Manuel utilisateur
iRoom
iRoom iDock Basic Manuel utilisateur
iRoom
iRoom touchDock Manuel utilisateur
iRoom
iRoom iTop OnWall Manuel utilisateur
iRoom
iRoom surDock-mini Manuel utilisateur
iRoom
iRoom iTop Manuel utilisateur
iRoom
iRoom iDock Basic Manuel utilisateur
iRoom
iRoom iDock Portrait Manuel utilisateur
iRoom
iRoom miniDock Manuel utilisateur
iRoom
iRoom iBezel Series Manuel utilisateur
