Ipf electronic IV56E205-S Manuel utilisateur

MANUAL • Subject to alteration! Version: 07.01.2022

ipf electronic gmbh

│

Rosmarter Allee 14 • 58762 Altena • Germany

│

Tel +49 2351 9365-0 • info@ipf-electronic.com •www.ipf-electronic.com 1

IN32E332-S

Inductive proximity switsch

IV56E205-S

Amplifier

VKC0E333-S

Cable socket

Installation of the sensor

•The sensor IN32E332-S is an inductive proximity switch for non-flush mounting. Due to its construction,

the device only detects metallic objects.

•To achieve the nominal switching distance of 15mm (see technical data), must have the metal part

following properties: Material: ST37

Dimensions: 32mm x 32mm x 1mm

For other materials, the correction factors are listed in the technical data.

•The switching distance may deviate from the nominal value by ±20% due to component tolerances.

•Install the device in a way, that the plastic cap is not surrounded by metal. The lateral distance to metallic

objects must be at least 32mm.

•To avoid damaging the threaded sleeve during assembly, the tightening torque must not exceed 150 Nm.

•The device may be used in surroundings with temperatures up to 230°C.

Installation of the amplifier

•The amplifier IV56E205-S is to be used for the operation of the sensor IN32E332-S in connection with the

cable socket VKC0E333-S.

•The device is suitable for mounting on a DIN rail. Mounting must take place outside the dust-ex-area, e.g.

in a protected switch cabinet.

•The pnp switching output can be further processed with a PLC. The switching output has a switch-on delay

of 100ms.

Elektrical connection

Connection of the sensor to the amplifier via the

VKC0E333-S cable socket:

Connection of the operating voltage and the switching

output to the amplifier.

IMPORTANT:

•Switch off the operating voltage before connecting or disconnecting the amplifier!

•The cable socket may also only be plugged in or unplugged from the sensor when it is de-energized. An

appropriate waiting time (>10s) must be observed before pulling off.

•When plugging in the cable socket, make sure that, that it snaps securely into the connector of the sensor.

Clamp 4: brown (sensor power supply +3V)

Clamp 5: black (screen)

Clamp 6: blue (sensor power supply GND)

Clamp 9: + U

Clamp 8: switching output pnp, no, 400mA

Clamp 7: 0V (GND)

MANUAL • Subject to alteration! Version: 07.01.2022

ipf electronic gmbh

│

Rosmarter Allee 14 • 58762 Altena • Germany

│

Tel +49 2351 9365-0 • info@ipf-electronic.com •www.ipf-electronic.com 2

Technical data IV56E205-S IN32E332-S

Operating voltage U

7 to 35V DC

3V DC, through

amplifier IV56E205-S

Nominal Switching

distance (sn)

13mm

Hysteresis

3% bis 20% from sn

Nominal Switching

distance (sr)

±20%

Ampacity

400mA

Ambient temperature

-25 … +70°C

0 … +230°C

Protection class

(EN60529)

Housing IP 40,

Clamp IP 20

IP 67 with attached cable

socket

Housing material

Plastic

Sleeve: VA

Cap: Vectra

Design

22.5x75x110

Threaded device M32x1.5 Total

length 83.5mm

Mounting

On DIN rail

Connection

Clamp

Lemosa connector

Matching cable socket

VKC0E333-S

(30m line length)

Adjustment factors

VA approx. 0.7

Ms, Al approx. 0.4

Cu approx. 0.3

Dimensional drawing:

IV56E205-S IN32E332-S VKC0E333-S

SAFETY INSTRUCTIONS:

Before commissioning, please make sure that all safety instructions listed in the product documentation, if applicable, have been

observed!

In case of direct impact on personal safety, the use of these products is prohibited.

Ce manuel convient aux modèles suivants

Autres manuels ipf electronic Accessoires

ipf electronic

ipf electronic ON430571 Manuel utilisateur

ipf electronic

ipf electronic OS15 Series Manuel utilisateur

ipf electronic

ipf electronic UT300025 Manuel utilisateur

ipf electronic

ipf electronic UT189023 Manuel utilisateur

ipf electronic

ipf electronic DW34311 Series Manuel utilisateur

ipf electronic

ipf electronic ON330571 Manuel utilisateur

ipf electronic

ipf electronic UT129521 Manuel utilisateur

ipf electronic

ipf electronic UT189020 Manuel utilisateur

ipf electronic

ipf electronic OTQ80576 Manuel utilisateur

ipf electronic

ipf electronic DW35312 Series Manuel utilisateur

ipf electronic

ipf electronic PT230020 Manuel utilisateur

ipf electronic

ipf electronic UT309023 Manuel utilisateur

ipf electronic

ipf electronic OTR49175 Manuel utilisateur

ipf electronic

ipf electronic PRQ80376 Manuel utilisateur

ipf electronic

ipf electronic MW10015 Series Manuel utilisateur

ipf electronic

ipf electronic UT300027 Manuel utilisateur

ipf electronic

ipf electronic OT05E244 Manuel utilisateur

ipf electronic

ipf electronic OTR49174 Manuel utilisateur

ipf electronic

ipf electronic OT05E287 Manuel utilisateur

ipf electronic

ipf electronic opti-check OC5396 Series Manuel utilisateur

ipf electronic

ipf electronic UT129023 Manuel utilisateur

ipf electronic

ipf electronic OT059176 Manuel utilisateur

ipf electronic

ipf electronic OR150400 Manuel utilisateur

ipf electronic

ipf electronic PT120320 Manuel utilisateur

Manuels Accessoires populaires d'autres marques

Hillco

Hillco 2810 Manuel utilisateur

Siemens

Siemens QSA2700D Manuel de l'opérateur

Contours

Contours ZY024 Manuel utilisateur

Saivod

Saivod VS621 Manuel utilisateur

Virtuox

Virtuox VirtuCLEAN 2.0 Manuel utilisateur

SCE

SCE ENVIRO-THERM SCE-TE170B24VSS Manuel utilisateur

Z-Wave

Z-Wave HSD-200Z Manuel utilisateur

turck

turck FMX-IM-2UPLI63FX Manuel utilisateur

Decagon Devices

Decagon Devices 10HS Manuel utilisateur

UPPAbaby

UPPAbaby Cup Holder Manuel utilisateur

Elko

Elko SmartSensor Leakage Wireless Manuel utilisateur

Grizzly

Grizzly H8371 Manuel utilisateur

Panasonic

Panasonic HG-T Series Manuel utilisateur

IFM Electronic

IFM Electronic Efector 250 Series Guide de référence

DigiDesign

DigiDesign 888/24 I/O Manuel utilisateur

PROZIS

PROZIS QUAY Manuel utilisateur

patagonia

patagonia PSI Vest Manuel utilisateur

SFC Energy

SFC Energy EFOY GO! Manuel utilisateur

ipf electronic IV56E205-S Manuel utilisateur

Manuels Accessoires populaires d'autres marques