ION PATHFINDER GO Manuel utilisateur

Tap or click

for technical

support.

ionaudio.com/support

User Guide

English

PATHFINDERTM GO

ION Audio Pathﬁnder

Go User Guide 4

Thank you for purchasing the PathﬁnderTM Go. At ION, your entertainment is as important to

us as it is to you. That’s why we design our products with one thing in mind—to make your life

more fun and more convenient.

Note: Before you ﬁrst use the product, please fully charge the batteries. Your unit was

purposely shipped with a reduced battery charge to ensure safe transit. For optimal charging,

power o the speaker while charging.

Use the included USB-A to USB-C® cable to connect the unit to a 5V, 2A power adapter (not

included) connected to a power outlet and let it charge for up to 3 hours (depending on the

speciﬁcations of your adapter). This helps ensure the longest life for your battery.

Box Contents

PathﬁnderTM Go

USB-A to USB-C® Charging Cable (3.28 ft / 1 m)

Quickstart Guide

Support

For the latest information about this product (documentation, technical speciﬁcations, system

requirements, compatibility information, etc.) and product registration, visit ionaudio.com.

For additional product support, visit ionaudio.com/support.

INTRODUCTION

ION Audio Pathﬁnder

Go User Guide 5

Outdoor Use and Care

Though PathﬁnderTM Go is water-resistant and able to tolerate splashing water, please review

the tips below to get the best performance from your PathﬁnderTM Go:

•

Bring PathﬁnderTM Go indoors during extreme weather.

•

Please do not place PathﬁnderTM Go in standing water.

•

Please do not connect the power adapter to a PathﬁnderTM Go in a wet environment. Make

sure the power input, power adapter, and power outlet are all completely dry before making

any connections.

•

WARNING: Keep any non-water-resistant devices (phones, music players, etc.) in a dry

place where they will not be aected by water and cause a risk of electric shock.

Charging & Battery Information

For the quickest charging time, power o PathﬁnderTM Go and use the included USB-A to

USB-C® cable to connect the USB-C® charging port on the rear panel of the speaker to a USB

power adapter (DC 5V 2A, not included) connected to a power outlet, or your computer

(powered on). A full charge can take up to 3 hours, depending on the speciﬁcations of your

5V, 2A adapter.

The lightning bolt icon on the display will light up when PathﬁnderTM Go is

connected to a power source and charging. The battery icon will ﬁll to display

the battery life percentage. When charging is complete, the lightning bolt icon

will disappear, and the battery icon will be completely ﬁlled.

If no audio is played through the PathﬁnderTM Go speaker for 15 minutes, the unit will enter a

standby mode to conserve battery life. This may mean the Bluetooth signal is paused, no audio

is coming through a device connected to the aux port, or the volume is set to 0. To wake the

unit, simply resume audio signal or press any button.

SETUP

ION Audio PathﬁnderTM Go User Guide 6

Here are some other recommendations for getting the longest life from the internal battery.

General Usage Fully charge the battery before using it.

Avoid full discharge of the battery if possible. Li-Ion batteries are

maintenance-free, and the battery will last longest when operating

between 30–80% charged.

Do not use the product while charging the battery.

Do not charge the battery in exceedingly hot (greater than 90°F/32°C) or

exceedingly cold (less than 32°F/0°C) temperatures.

Storage For best product longevity, do not store at exceedingly hot (greater than

90°F/32°C) or exceedingly cold (less than 32°F/0°C) temperatures.

For best product longevity, store with a 50% battery charge.

If you leave the battery level low and do not charge it for 6 months, it may

permanently lose capacity.

Repair If the battery failsto charge, contact ION Audio at ionaudio.com.

Disposal Bring the unit to a recycling center or dispose of in accordance with local

ordinances.

ION Audio Pathﬁnder

Go User Guide 7

Front Panel

Click a control below to jump to that section.

1. Power Button

Press and hold this button to turn PathﬁnderTM Go on and o.

2.Boom ButtonTM

Press to simultaneously enhance the bass EQ and volume and activate a light show that

pulses to the beat of the music.

3.Bluetooth® Button

Press this button to enter Bluetooth pairing mode. When connected to a Bluetooth device,

double-press this button to disconnect a paired device and re-enter pairing mode, or

single-press to disconnect a paired device and enter Aux mode. See Operation >

Bluetooth Connecting with PathfinderTM Go to learn how to connect a Bluetooth device.

Press and hold this button to enable or disable voice prompts.

FEATURES

778

3 54

ION Audio PathﬁnderTM Go User Guide 8

4.Source Button

Press this button to cycle between FM, USB, and Aux modes.

5.Lights Button

Press this button to switch between Color Cycle, Beat Sync, and Solid Color light modes, or

to turn the lights o.

6.Stereo-LinkTM / Repeat Button

SeeOperation > Stereo-LinkTM: Syncing Two Speakers to learn more.

In USB playback mode, press this button to cycle between repeat modes. See Operation >

USB Playback Mode to learn more.

7.Previous / Next Buttons

In FM mode, press these buttons brieﬂy to go to the previous or next station. Press and hold

these buttons to seek the previous or next strong station.

In Bluetooth and USB modes, press the Previous or Next buttons to go to the beginning of

the current track or skip to the following track, respectively. Press the Previous button again

within one second to skip to the previous track.

8.Play/Pause / Presets Button

Press this button to play and pause Bluetooth or USB audio.

In FM mode, use this button to save and recall radio presets. See Operation > Using the

Radio to learn more.

9.Volume Up/Down Buttons

Press these buttons to adjust the speaker’s volume. The current volume level will be shown

on the display.

Press and hold both + and – buttons for 5 seconds to reset the speaker to factory settings.

ION Audio PathﬁnderTM Go User Guide 9

Display

The PathﬁnderTM Go display shows information related to its current operation, including:

•Battery Indicator ( )

The battery icon displays the battery life percentage. When fully charged, the battery

icon will be completely ﬁlled.

•Stereo-LinkTM Icon ( )

The Stereo-LinkTM icon will display when PathﬁnderTM Go is linked to another speaker.

The Stereo-LinkTM icon will be o when a single speaker is used. See Operation > Stereo-

LinkTM: Syncing Two Speakers below for instructions on how to link two speakers.

•Bluetooth Icon ( )

The Bluetooth icon will display when a device is paired to PathﬁnderTM Go. See Operation

>Bluetooth Connecting with PathfinderTM Go to learn how to connect a Bluetooth

device.

•Source Icons (FM, AUX, USB)

These icons will indicate whether PathﬁnderTM Go is in FM, Aux, or USB playback modes.

•Lightning Bolt Icon ( )

The lightning bolt icon will display when PathﬁnderTM Go is connected to a power outlet.

•BOOM Icon

The BOOM icon will display when the Boom ButtonTM is pressed. The icon will be o

when the function is deactivated.

•Radio Station

The numerals on the right side indicate the current radio station that is selected. This

area will also show the volume and the current repeat mode when either are changed.

ION Audio PathﬁnderTM Go User Guide 10

Rear Panel

Note: Pull the tab on the protective rubber panel to release it and access the rear panel ports.

1. USB-A Playback / Device Charging Port

Connect a USB drive here for USB mode playback. See Operation > USB Playback Mode

for more information.

PathﬁnderTM Go includes a power bank function, which allows you to charge a compatible

5V, 1A smartphone, tablet, or other device using the unit’s internal battery (Capacity:

2000mAh/11.1V 22.2Wh) by connecting a cable here. See Operation > Using the USB

Charge Port for more information.

2. Aux Input

Connect an MP3 or other audio player to PathﬁnderTM Go here using a 1/8” (3.5 mm)

auxiliary cable (not included). See Operation > Connecting an Audio Device Using the

Aux Input for more information.

3. USB-C® Charging Port

Connect the USB-C® end of the included cable to PathﬁnderTM Go here, then connect the

USB-A end to a 5V, 2A USB power adapter (sold separately) and plug it into a power outlet,

or your computer (powered on).

1 2 3

ION Audio Pathﬁnder

Go User Guide 11

Bluetooth Connecting with Pathfinder

1. Turn on PathﬁnderTM Go by holding down the Power button for 2 seconds. PathﬁnderTM

Go will automatically enter Bluetooth pairing mode.

2. Navigate to your device’s Bluetooth setup screen, ﬁnd Pathfinder Go, and connect. The

Bluetooth icon will appear in the display, and you will hear “Connected” (if voice prompts

are enabled).

Note: Do not connect to iSP165_BLE; this is reserved exclusively for connecting to the ION

Sound ControlTM app. If you experience trouble in connecting, select “Forget this Device”

on your Bluetooth device and try to connect again.

3. Now you can use the buttons on the front panel to control audio playback:

•Press the Play/Pause button to play or pause the current track.

•Press and quickly release the + button to increase the volume.

•Press and quickly release the - button to decrease the volume.

•Press the > button to skip to the next track.

•Press the < button to revert to the beginning of the current track. Repeat this action

within 1 second to skip to the previous track.

To disconnect a paired device, do any of the following:

•Turn o Bluetooth from your device’s Bluetooth settings. The speaker will enter

Bluetooth pairing mode to make it available for another device.

•Double-press the Bluetooth button to disconnect and re-enter pairing mode.

•Brieﬂy press the Bluetooth button to disconnect and enter Aux mode.

When you disconnect a Bluetooth device, you will hear “Bluetooth disconnected” if voice

prompts are enabled.

OPERATION

1 - PRESS AND HOLD 2

PATHFINDERTM GO

ION Audio PathﬁnderTM Go User Guide 12

Stereo-LinkTM: Syncing Two Speakers

If you would like to play music from a Bluetooth device, you can ﬁrst “link” two PathﬁnderTM

Go speakers together in order to listen to your music in stereo. One PathﬁnderTM Go will serve

as the left speaker and the other will serve as the right speaker.

Note: PathﬁnderTM Go can also be linked with ION Audio PathﬁnderTM 320° speakers.

To link two PathfinderTM Go speakers together:

Note: When you begin the Stereo-LinkTM process, any connected Bluetooth devices will be

automatically disconnected. You can also disconnect your device prior to beginning by

double-pressing the Bluetooth button.

1. Press and hold the Stereo-LinkTM / Repeat button on both speakers to enter Stereo-LinkTM

mode. You will hear a tone and the Stereo-LinkTM and Bluetooth icons on each speaker’s

Display will begin ﬂashing while they search for each other.

Note: The linking process can take up to 30 seconds to complete. The closer the two

speakers are to each other, the quicker the link is established.

Once the speakers are linked, the Stereo-LinkTM icons on each speaker’s Display will be lit

solid.

2. Press and release the Bluetooth button on either speaker to select Bluetooth mode and

begin the Bluetooth pairing process. The speaker you use for Bluetooth pairing will serve

as the primary speaker. The Bluetooth icon on the primary speaker’s Display will ﬂash to

indicate it is searching for a Bluetooth device to pair with.

3. Navigate to your Bluetooth device’s setup screen, ﬁnd PATHFINDER GO, and connect.

When the connection is successful, you will hear "Bluetooth Connected" from the primary

speaker (if voice prompts are enabled), and the Bluetooth icon on the Display will be lit solid.

When audio playback begins, you should hear it through both speakers. The primary

speaker will play the left channel while the secondary speaker plays the right channel.

Playback controls are active on both speakers.

1 - PRESS AND HOLD

3 - PRESS

(primary speaker)

2 - PRESS AND HOLD

PATHFINDERTM GO

(speaker 1 & 2)

Autres manuels pour PATHFINDER GO

Table des matières

Autres manuels ION Intervenants

ION

ION ISP32 Manuel utilisateur

ION

ION PATHFINDER 320 Manuel utilisateur

ION

ION PROFILE LP Manuel utilisateur

ION

ION BLOCK ROCKER BLUETOOTH Manuel utilisateur

ION

ION Total PA Max Manuel utilisateur

ION

ION Clipster Manuel utilisateur

ION

ION Party Boom FX Manuel utilisateur

ION

ION PROFILE LP Manuel utilisateur

ION

ION Block Rocker Plus Manuel utilisateur

ION

ION POWER GLOW 300 Manuel utilisateur

ION

ION KEYSTONE Manuel utilisateur

ION

ION Garage Rocker Manuel utilisateur

ION

ION WATER ROCKER Manuel utilisateur

ION

ION Explorer XL Manuel utilisateur

ION

ION Party On Manuel utilisateur

ION

ION AquaSport Max Manuel utilisateur

ION

ION Bright Max Manuel utilisateur

ION

ION party starter Manuel utilisateur

ION

ION Highlander iPA103B Manuel utilisateur

ION

ION IPA22P Manuel utilisateur

ION

ION Flash Cube Manuel utilisateur

ION

ION Party Rocker Go Manuel utilisateur

ION

ION Pickup Manuel utilisateur

ION

ION PARTY POWER Manuel utilisateur

Manuels Intervenants populaires d'autres marques

argon audio

argon audio IE20 Manuel utilisateur

Denon

Denon SC-N7 Manuel utilisateur

Gemline

Gemline Ace 3952 Manuel utilisateur

Focal

Focal ON WALL 300 Mode d’emploi

HEADRUSH

HEADRUSH Maximus HRSP 5024 Manuel utilisateur

SoundLogic

SoundLogic BCCS-6/6395 Manuel utilisateur

Peavey

Peavey DTH 218 Manuel utilisateur

Avantree

Avantree Pluto Air Manuel utilisateur

Morel

Morel Integra Series INTEGRA OVATION 4 Manuel utilisateur

Oppo

Oppo SONICA Manuel utilisateur

Bose

Bose SoundLink Wireless Music System Manuel utilisateur

Rocksteady

Rocksteady Stadium Manuel utilisateur

Bowers & Wilkins

Bowers & Wilkins 4 Manuel utilisateur

Sonance

Sonance SONOS OUTDOOR Series Manuel utilisateur

Electro-Voice

Electro-Voice EVID FM4.2 Manuel utilisateur

Pioneer

Pioneer XW-HTD630 Manuel utilisateur

Onn

Onn BWA16AA002 Manuel utilisateur

HP GL313AA - USB Speakers PC Multimedia Manuel utilisateur