Iomega ZipCD 650 Instructions d'utilisation

Internal ZipCD™ATAPI Drive

PC Quick Install

WRITING

PHONES

DISCIN

OPEN

Recordable

ReWritable

650

Start your computer, wait for the operating system to load,

then insert the ZipCD™software disc.

Select “Print Installation Instructions” to view and print detailed

installation instructions. See step 12 for information about viewing the

manual.

Select “Install ZipCD™Software” to install the software needed for your

ZipCD drive. Follow the onscreen instructions.

If necessary, change the ZipCD™drive jumper setting 1.

Leave the setting in the Slave 2position if you are connecting the ZipCD™

drive on the same data cable with another device. Use the Master 3setting if

the ZipCD drive will be the only device on the secondary IDE channel. Do

not use Cable Select unless your computer supports this mode. (Check your

computer documentation.)

Shut down the computer, disconnect the power cord and

remove cover.

CAUTION! Always turn off power to the computer and all devices

connected to it before beginning any computer hardware change.

NOTE: Locate and write down the drive serial number for your drive.

WRITING

PHONES

DISCIN

OPEN

Recordable

ReWritable

650

Select the IDE interface connection you want to use.

Connect the ZipCD™drive to the secondary IDE channel 1either in slave

configuration with another drive as master (e.g. CD-ROM) or in master

configuration as the only device. If you are unsure about the connection, see

step 11 to view and print the detailed instructions.

WRITING

PHONES

DISCIN

OPEN

Recordable

ReWritable

650

Locate a vacant 5.25”drive bay. Remove the panel cover and

slide the ZipCD™drive into the drive bay.

Some computers may require rails. Check your documentation.

NOTE: If it makes it easier to connect cables on your computer, you can

secure the ZipCD™drive in the drive bay now. (See step 9.)

MASTER

SLAVE

CABLESELECT

AUDIO OUT

RGNDL

CS M

SL A

IDEPIN1

DC INPUT

+5GND+12

ZipCD

PIN 1

Pin 1

40 Pin

Pin 1

Connect the ZipCD™drive to the computer’s IDE connection

using an IDE data cable.

NOTE: You can use either the cable included with the drive or an IDE cable

that may already be connected to the computer’s motherboard.

CAUTION! Make sure PIN 1 on the cable connects to PIN 1 on the ZipCD™

drive, the motherboard, and any other connected device.

MASTER

SLAVE

CABLE SELECT

AUDIO OUT

R GND L

C S M

S L A

IDE PIN1

DC INPUT

+5 GND +12

Skip this step if the computer’s CD-ROM drive is already

connected to the computer’s audio in port.

Connect the audio cable to the ZipCD™drive and the computer’s audio

connector, usually located on the sound card or the motherboard. Check

your sound card documentation or your system’s documentaton and the

User’s Manual for more detailed instructions.

MASTER

SLAVE

CABLE SELECT

AUDIO OUT

R GND L

C S M

S L A

IDE PIN1

DC INPUT

+5 GND +12

Connect a computer power supply cable.

You may need a Y-cable if your system’s power cable does not have a free

connector.

CAUTION! Make sure the power supply cable is securely connected to the

ZipCD™drive.

Autres manuels Iomega Stockage

Iomega

Iomega Home Network Hard Drive Instructions d'utilisation

Iomega

Iomega eGo 34837 Manuel utilisateur

Iomega

Iomega ZIP drive 100 Manuel utilisateur

Iomega

Iomega 34278 Manuel utilisateur

Iomega

Iomega CD-RW USB 2.0 Manuel utilisateur

Iomega

Iomega eGo 34895 Manuel utilisateur

Iomega

Iomega eGo 34898 Manuel utilisateur

Iomega

Iomega 34172 Manuel utilisateur

Iomega

Iomega Media Xporter 33992 Manuel utilisateur

Iomega

Iomega JAZ 1GB Manuel utilisateur

Iomega

Iomega ZIP drive 100 Manuel d'installation et d'exploitation

Iomega

Iomega eGo Portable Manuel utilisateur

Iomega

Iomega 32434 Manuel utilisateur

Iomega

Iomega Desktop Hard Drive Manuel utilisateur

Iomega

Iomega eGo 35054 Manuel utilisateur

Iomega

Iomega StorCenter px12-400r Manuel utilisateur

Iomega

Iomega StorCenter ix-Series Manuel utilisateur

Iomega

Iomega eGo 34837 Manuel utilisateur

Iomega

Iomega eGo Encrypt Manuel utilisateur

Iomega

Iomega 33115 Manuel utilisateur

Iomega

Iomega UltraMax Pro Manuel utilisateur

Iomega

Iomega Ultramax 34389 Manuel utilisateur

Iomega

Iomega 33904 Manuel utilisateur

Iomega

Iomega 35180 Manuel utilisateur

Manuels Stockage populaires d'autres marques

QNAP

QNAP TS 32PXU Series Manuel utilisateur

LaCie

LaCie RUGGED RAID Manuel utilisateur

Freecom

Freecom CLS DOCK Manuel utilisateur

PNY

PNY Attache P-FD64MBATT3 Manuel utilisateur

HP StorageWorks MSL2024 Manuel utilisateur

OLT

OLT 6x6 Maximizer Manuel utilisateur

Transcend

Transcend JetFlash 160 Manuel utilisateur

LaCie

LaCie RUGGED MINI Manuel utilisateur

Thunderbolt

Thunderbolt 600 Manuel utilisateur

Panasonic

Panasonic LB-DH8 series Manuel

Intel

Intel RAID High Availability Manuel utilisateur

LaCie

LaCie 12big Thunderbolt 3 Manuel utilisateur

Spectra Logic

Spectra Logic T-Series Spectra T50e Manuel utilisateur

Panasonic

Panasonic LKM-F931-1 Manuel utilisateur

Tabernus

Tabernus Enterprise Erase E2400 Manuel utilisateur

Rocstor

Rocstor COMMANDER 3F series Manuel utilisateur

HP P9000 Manuel utilisateur

Western Digital

Western Digital Ultrastar Data60 Manuel utilisateur