Involight LEDBAR508R Manuel utilisateur

LEDBAR508R

User Manual

Please read this manual carefully before use!

Thank you for purchasing this product. To optimize the performance of this

product,prior to use,please read these operating instructions carefully to

familiarise yourself with the basic operation of this unit.Please keep the manual

in safe price for future reference.

This unit has been tested at our factory before being shipped to you, there is

no assembly required.

Once after received this product , please take and put carefully. And check

cautiously that whether the product was damaged or not during the

transportation.

Checking Parts

Please check if the following parts are included:

1 x Laser bar

1 x Power cable

1 x User manual

Danger Laser Radiation!

Avoid direct eye exposure!

Laser radiation can cause eye damage or skin damage

All protective measures for a safe operation of this laser must be applied.

Installation

1. Please check the voltage whether is the same with the one showed on the

equipment or not.

2. This laser light is 3B, it must ask for the technical person and set the light

safety when installation. And let the light beam at the suitable angle.

3. When install this equipment please make sure there's no flammable

surfaces (decorated things, etc) within at least 2.5M and maintain minimum

distance of 0.5M from the equipment to the walls.

4. Please make sure that there's no other equipment or decorating materials

obstructed the exhaust fan and the vent-pipe.

5. Products should be install immobility.

6. In case of safety, it's very important that to connect the earth with line.

Attention

1.Please do not open the bottom cover yourself without permission.Operate it

accord the user manual. Call the technician when the machine breaks down.

2.Please do not see the laser beam directly to avoid any damage.

3.Before connect or disconnect the power, please adjust the luminance of the

laser diode to the least to avoid any damage to the laser diode.

4.This unit should be keep dry, do not use in the rain and dusty environment. It

can be use in the outdoor with the water-proof cover protector.

5. Set the light immobility and try to avoid strong shake or hit.

6.Prevent dust into the equipment to avoid problems.

7.Please keep that there's no other equipment or decorating materials

obstructed the exhaust fan and the vent-pipe when the equipment was

working.

8.Before connect power, check the plug is immobility or not, power line should

be connect well.

9.Please do not open or close the equipment frequently that's to avoid any

affect to the life span of the laser diode, and try the best to avoid the long time

working.

10.Due to the characteristic of the laser diode, after four hours working, it

should be close at least 25 minutes until the laser diode cooling then work

again.

11.Don't touch the light or draw the power line when your hand was wet. And

do not pull the electronic power line.

12.Maintain the distance at least 3M above from the equipment to the object.

13.This equipment does not have any parts can repair for the users, please do

not open the equipment.

14.When the laser diode became dim or damaged please contact the dealer

timely.

15.When you want to re-transfer the products,you'd better use the original

package to shockproof.

Display Function Instruction

No.

Up/Down

Default

Function

Addr

1-512

Set address/Control mode/Slave

mode

Chnd

22CH

7CH

Slnd

HoSt

Master

SLAV

Slave

LoSt

AUTO

Auto

BLAC

Black-out

LoSt

HOLD

Hold

SOUN

Sound

SEnS

S001-S100

Sound sensitivity

Inv

Light reverse

OFF

Reset direction of light

Corr

0-255

127

Angle fine, for adjust direction

once multi units connected

DISP

rdon

display

rdoF

Display reverse

LED

Display full on all the time

OFF

Display off once without click after

13secs

Deft

YES

Factory default

Rest

YES

reset

U1.00

Software version

Channel Instructions

7channels

Channel

Value

Function

CH1

Dimmer

0-255

Dimmer 0-100%

CH2

Strobe

0-15

No function

16-95

Strobe （1HZ-25HZ Slow-Fast）

96-175

Strobe 1Hz from slow to fast

176-255

Random strobe

CH3

Motor Position

0-255

Motor Position Setection

CH4

Motor fine

adjustment

0-255

Motor Position fine adjustment

CH5

Motor Scanner

Speed

0-255

Motor Scanner Speed

setection(from fast to slow)

CH6

Laser and LED

0~29

No function

30-99

Laser full on

100-199

LED full on

200-255

Both laser and LED full on

CH7

Auto

0-30

No function

31-200

Auto

201-255

Sound

22channels

Channel

Value

Function

CH1

Dimmer

0-255

Dimmer 0-100%

CH2

Strobe

0-15

No function

16-95

Strobe （1HZ-25HZ Slow-Fast）

96-175

Strobe 1Hz from slow to fast

176-255

Random strobe

CH3

Motor Position

0-255

Motor Position Setection

CH4

Motor fine

adjustment

0-255

Motor Position fine adjustment

CH5

Motor Scanner

Speed

0-255

Motor Scanner Speed

setection(from fast to slow)

CH6

Laser and LED

effect

0~15

No function

16-35

effect 1

36-55

Effect 2

56-75

Effect 3

76-95

Effect 4

96-115

Effect 5

116-135

Effect 6

136-155

Effect 7

156-175

Effect 8

176-195

Effect 9

196-255

Effect 10

CH7

Speed

0-255

Chasing speed from slow to fast

CH8

Laser 1

0-127

Closed

128-255

CH9

Laser 2

0-127

Closed

128-255

CH10

Laser 3

0-127

Closed

128-255

CH11

Laser 4

0-127

Closed

128-255

CH12

Laser 5

0-127

Closed

128-255

CH13

Laser 6

0-127

Closed

128-255

CH14

Laser 7

0-127

Closed

128-255

CH15

Laser 8

0-127

Closed

128-255

CH16

LED1

0-255

0-100%

CH17

LED2

0-255

0-100%

CH18

LED3

0-255

0-100%

CH19

LED4

0-255

0-100%

CH20

LED5

0-255

0-100%

CH21

LED6

0-255

0-100%

CH22

LED7

0-255

0-100%

Note:Set master-slave,master machine at auto or sound mode and slave

machine at d001.

Maintenance

Maintenance should be performed every 15-day period, by using a sponge

which is dipped with alcohol, rather than wet cloth or other chemical liquid, to

clean the mirror.

Always disconnect from the mains when the device is not in use or before

cleaning it.

Warning

Power must be disconnected before maintenance or repair. Do not look at the

light source directly

Note

Don't separate laser machine from laser power and repair them by yourself,

otherwise no good repair service will be supplied.

Technical Specifications

1.Power Supply: AC 100-240V 50/60Hz

2.Rated Power: 60W

3.Fuse: BDGP 5*20mm,2A

4. Single Red: Red 500mW/638nm*8 (200mW/650nm*8 option) + 7*3W

Amber LEDs

5. Working Mode: Sound Active/ Auto-play/DMX512/Master-Slave

6. Output laser spot diameter: 14mm

7.Control Signal: DMX512 signal

8.DMX Control Channels: 7/22

9.Operating Temperature: -1º--35º

10.Storage Temperature: -10º--60º

11.Warm-Up Time :<15 min

12.Laser Classification: 3B

13.Modulation: TTL

Declaration

This device has left our premises in absolutely perfect condition. In order to

maintain this condition and to ensure a safe operation, it is absolutely

necessary for the user to follow the safety instructions and warning notes

written in this user manual.

We cannot be made liable for damages caused by incorrect installations and

unskilled operation!

Warranty Card

This product is made of high-brightness transistor. We will provide 1 year

warranty under the condition that user has operated the light normally and

lifetime service. We won't provide warranty if the damage is caused by

artificial or force majeure event. Cost of fittings should be charged by user

if product need maintenance after 1 year .Please cut this warranty card

and shipped it along with the product to our factory when applying for

warranty.

Product：Purchasing date：Code of invoice：

Warranty date: From To

User’s name：Add：

Company：Tel：

Table des matières

Autres manuels involight Matériel de DJ

involight

involight MATRIX559 Manuel utilisateur

involight

involight LED MH 1930 Manuel utilisateur

involight

involight LEDRX550 Manuel utilisateur

involight

involight CM1200 Manuel utilisateur

involight

involight LEDRX600 Manuel utilisateur

involight

involight NL410 Manuel utilisateur

involight

involight MH MATRIX25 Manuel utilisateur

involight

involight MINIBEAM30 Manuel utilisateur

involight

involight TRINITY150LED Manuel utilisateur

involight

involight LED MH127B Manuel utilisateur

involight

involight COBPAR100W Manuel utilisateur

involight

involight SLIMPAR710PRO Manuel utilisateur

involight

involight SONICWAVE1231 Manuel utilisateur

involight

involight Paint BAR UV12 Manuel utilisateur

involight

involight SLIMPAR1210PRO Manuel utilisateur

involight

involight ALPINA 1200DMX Manuel utilisateur

involight

involight ALPINA600 Manuel utilisateur

involight

involight TRINITY200LED Manuel utilisateur

involight

involight LEDBAR500 Manuel utilisateur

involight

involight Moving Bar 1808 Manuel utilisateur

involight

involight LED STROB500 Manuel utilisateur

involight

involight LEDRING800 Manuel utilisateur

involight

involight TWINBEAM2410 Manuel utilisateur

involight

involight LED MH368ZW Manuel utilisateur

Manuels Matériel de DJ populaires d'autres marques

ALPHA LITE

ALPHA LITE ALPHA 1500 Manuel du propriétaire

Chauvet

Chauvet OVATION E-930VW Manuel utilisateur

Zumtobel

Zumtobel APHRODITE Home Manuel utilisateur

Snow Masters

Snow Masters Zig Oscillator Manuel utilisateur

EuroLite

EuroLite 50530554 Manuel utilisateur

Beamz

Beamz BUV243 Manuel utilisateur

thomann

thomann Stairville DJ Lase 40-G MK-III Manuel utilisateur

Eagletone

Eagletone 6 Eyes Flower Manuel utilisateur

EuroLite

EuroLite FLD-1508 Manuel utilisateur

Technical Pro

Technical Pro LG8xSEA Manuel utilisateur

JB Systems

JB Systems Lounge Laser DMX Manuel utilisateur

Lightmaxx

Lightmaxx Vega Halo 90 Manuel utilisateur

Elation

Elation FUZE WASH Z350 Manuel utilisateur

Maverick

Maverick MK3 WASH Manuel utilisateur

Infinity

Infinity TF-260C7 Fresnel Manuel utilisateur

Chauvet

Chauvet EVE E-50Z Manuel utilisateur

Eliminator Lighting

Eliminator Lighting E 138 Manuel utilisateur

EuroLite

EuroLite Mini Multicolor LED Flashing Light SC Manuel utilisateur

involight LEDBAR508R Manuel utilisateur

Manuels Matériel de DJ populaires d'autres marques