Intersil ISL5761EVAL1 Manuel utilisateur

AN9966

ISL5x61EVAL1 and EVAL2 User’s Manual

Description

The ISL5x61EVAL1 and EVAL2 evaluation boards provide a

quick and easy method for evaluating the

ISL5761/5861/5961 (10-, 12-, or 14-bit), 130/210MSPS high

speed DACs. EVAL1 is populated with an SOIC package and

EVAL2 is populated with a TSSOP package. The board is

configured so that the converter outputs differential current

into a transformer circuit to form an output voltage. The

amount of current out of the DAC is determined by an

external resistor and either an internal or external reference

voltage. The CMOS digital inputs have optional external

termination resistors. The evaluation board includes a ribbon

cable digital interface that is compatible with Intersil DUC

(Digital Up Converter) evaluation boards like the ISL5217.

Features

• 210MSPS 10-, 12- or 14-Bit CMOS DAC

• Transformer-Coupled or Single-Ended SMA Outputs

• Interface compatible to the ISL5217 Digital Up Converter

allows complete Baseband-to-IF Demonstration

Functional Block Diagram

Getting Started

See Figure 1. A summary of the equipment, external

supplies and signal sources needed to operate the board is

given below:

1. +3.3V supply for ISL5x61 DAC.

2. Patterngenerator(pattern source).

3. Squarewave,DC-biasedclocksource(usuallypart ofthe

pattern generator).

4. Spectrum analyzer or oscilloscope for viewing the output

of the converter.

Attach the evaluation board to the power supply(s). Connect

the bits from the data generator to the evaluation board

using the 2x20 pin connector (J1). Connect the clock source

to the evaluation board, either through the 2x20 pin

connector (J1) or via the provided SMA (J2).

Using a coaxial cable with the proper SMA connector, attach

the output of the converter, IOUT (J11), to the measurement

equipment that will be evaluating the converter’s

performance. Make sure that the jumpers are in their proper

placement (default placement should be J5 and J10

populated, all others not populated).

Set the clock signal and data levels to swing from 0-3V. Turn

the power supply on. Turn the pattern and clock on and

measure the result at the analog output SMA (J11).

Ordering Information

PART

NUMBER

TEMP.

RANGE

(oC) PACKAGE NUMBER

OF BITS CLOCK

SPEED

ISL5761EVAL1 25 SOIC 10 210MHz

ISL5861EVAL1 25 SOIC 12 210MHz

ISL5961EVAL1 25 SOIC 14 210MHz

ISL5761EVAL2 25 TSSOP 10 210MHz

ISL5861EVAL2 25 TSSOP 12 210MHz

ISL5961EVAL2 25 TSSOP 14 210MHz

10-14 BITS

CLOCK

XFMR

IOUTA

IOUTB

IOUT

SMA

CLK

SMA

DAC

AGND PLANE

DVDD PLANE

AVDD PLANE

DGND PLANE

2x20 PIN HEADER

Application Note September 2001

CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.

1-888-INTERSIL or 321-724-7143 |Intersil and Design is a trademark of Intersil Americas Inc.

Board Options

Jumpers (Default State)

J3 - Selects DAC Sleep Mode (OPEN)

J4 - Selects External Reference (OPEN)

J5 - Selects Internal Reference (SHORT)

J6 - Selects IOUTA (OPEN)

J7 - Selects IOUTB (OPEN)

J10 - Grounds the Transformer Output (SHORT)

Output Transformer

T1 - T1-1T (case style Mini-Circuits KK81)

T2 - ADT1-1WT (case style Mini-Circuits CD542)

Clock

2x20 Pin Header (J1 - pin 19)

SMA - J2

RSET

Fixed Resistor - R34 (2kΩ= 20mA full scale output)

Potentiometer - R35

Power Supply

Split AVDD and DVDD

Single VDD (by connecting them together prior to the

inductors on the board)

Digital Inputs

The digital inputs are expecting 3V CMOS levels. The board

is shipped without termination resistors so that most systems

can drive the load. The board is configured so that the user

can populate 50Ωtermination resistors if required (R1-15).

Consult the datasheet for the DAC for min/max amplitude

requirements for the clock and data.

Analog Outputs

The transformer configuration is such that it expects to see a

50Ωload at the end of an RF cable. If the user wishes to

evaluate the single-ended performance of the DAC, J6

and/or J7 will need to be populated, and R31/32 should be

populated with 50Ωresistors (or a resistor of choice that

does not cause the analog output to violate the output

voltage compliance range specified in the datasheet.)

Board Schematics/Layout/BOM

The schematics, board plots, and bill of materials can be

downloaded from the Intersil web site. Search on the DAC

part number.

Other

The labels on the board for IOUTB (J8) and IOUTA (J9) are

backwards. J8 should be IOUTA and J9 should be IOUTB.

ISL5x61 + ISL5217 Combo

The ISL5x61 evaluation board is designed to interface

directly to an ISL5217 evaluation board. The ISL5217 is a

104MSPS Digital Up Converter.The ISL5217 can be used to

SPECTRUM ANALYZER

50Ω

SMA

CABLE

ISL5x61

DAC

+3.3V

FIGURE 1. INTERSIL ISL5x61 EVALUATION SYSTEM SETUP BLOCK DIAGRAM

POWER

SUPPLY

PATTERN GENERATOR

ISL5x61 EVALUATION BOARD

14 BITS

CLOCK

2x20 PIN HEADER

GORE QUIETZONE®CABLES

Application Note 9966

Quietzone® is a registered trademark of W.L. Gore & Associates, Inc.

All Intersil products are manufactured, assembled and tested utilizing ISO9000 quality systems.

Intersil Corporation’s quality certifications can be viewed at www.intersil.com/design/quality

Intersil products are sold by description only. Intersil Corporation reserves the right to make changes in circuit design and/or specifications at any time without notice.

Accordingly, the reader is cautioned to verify that data sheets are current before placing orders. Information furnished by Intersil is believed to be accurate and reliable.

However, no responsibility is assumed by Intersil or its subsidiaries for its use; nor for any infringements of patents or other rights of third parties which may result from its

use. No license is granted by implication or otherwise under any patent or patent rights of Intersil or its subsidiaries.

For information regarding Intersil Corporation and its products, see www.intersil.com

Sales Office Headquarters

NORTH AMERICA

Intersil Corporation

7585 Irvine Center Drive

Suite 100

Irvine, CA 92618

TEL: (949) 341-7000

FAX: (949) 341-7123

Intersil Corporation

2401 Palm Bay Rd.

Palm Bay, FL 32905

TEL: (321) 724-7000

FAX: (321) 724-7946

EUROPE

Intersil Europe Sarl

Ave. C - F Ramuz 43

CH-1009 Pully

Switzerland

TEL: +41 21 7293637

FAX: +41 21 7293684

ASIA

Intersil Corporation

Unit 1804 18/F Guangdong Water Building

83 Austin Road

TST, Kowloon Hong Kong

TEL: +852 2723 6339

FAX: +852 2730 1433

generate 1-4 narrowband carriers or 1-2 wideband carriers.

Consult the ISL5217 documentation for detailed information

on using the ISL5217 evaluation board.

To connect the two boards together, J4 on the ISL5217eval

(DUC) is connected to J1 on the ISL5x61eval (DAC) via a

2x20 pin ribbon cable. The DAC board is configured as is

stocked, except R16 is not populated. See Figure 2 for a

block diagram of the two boards connected.

If a clock source is available that has both CLK and CLK, the

clocking of the two boards is simplified. CLK should connect

to the DUC evaluation board at J11, with a T-connector that

has a 50Ωterminator attached. CLK should go to the DAC

evaluation board at J2 and also use a T-connector with a

50Ωterminator. (Or, 50Ωterminators can be populated on

the evaluation boards. See the board schematics for more

information on doing this.)

If a generator with CLK and CLK is not available, a single

clock source can be used. Connect a T-connector to J2 of

the DAC board and another to J11 of the DUC board.

Connect a DC-biased clock signal to the connector at J2,

then connect J2 and J11 together with a short cable.

Connect a 50Ωterminator to the other side of the

T-connector at J11 on the DUC board. Sometimes the length

of the clock cable running from the DAC board to the DUC

board has to be adjusted to achieve adequate setup and

hold times between DATA and CLK.

TO SPECTRUM

50Ω

SMA

CABLE

ISL5x61

DAC

+3.3V (<0.1A)

FIGURE 2. INTERSIL ISL5x61 + ISL5217 SETUP BLOCK DIAGRAM

POWER

SUPPLY

ISL5x61 EVALUATION BOARD

14 BITS

2x20 PIN HEADER

ANALYZER

RIBBON CABLE

2x20 PIN HEADER

ISL5217

4CH DIGITAL

UP CONVERTER

CLOCK (104M MAX)

ISL5217 EVALUATION BOARD

+5V (<2A)

POWER

SUPPLY

Application Note 9966

Mouser Electronics

Authorized Distributor

Click to View Pricing, Inventory, Delivery & Lifecycle Information:

Intersil:

ISL5961EVAL1

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Intersil Carte mère

Intersil

Intersil ISL8215MEVAL1Z Manuel utilisateur

Intersil

Intersil ISL71831SEH Manuel utilisateur

Intersil

Intersil ISL70219ASEHEV1Z Manuel utilisateur

Intersil

Intersil ISL97684 Manuel utilisateur

Intersil

Intersil ISL9000A Manuel utilisateur

Intersil

Intersil ISL59420/21EVAL1 Manuel utilisateur

Intersil

Intersil ISL6294AEVAL1Z Instructions d'utilisation

Intersil

Intersil ISL6296 Instructions d'installation et d'utilisation

Intersil

Intersil ISL70002SEHEVAL1Z Manuel utilisateur

Intersil

Intersil ISL32741EVAL1Z Manuel utilisateur

Intersil

Intersil ISL282x6EVAL1Z Manuel utilisateur

Intersil

Intersil ISL70321SEHDEMO1Z Manuel utilisateur

Intersil

Intersil ISL71010BM25EV1Z Manuel utilisateur

Intersil

Intersil ISL70001ASEHEV1Z Instructions d'installation et d'utilisation

Intersil

Intersil ISL8500EVAL1Z Instructions d'installation et d'utilisation

Intersil

Intersil ISL9120IIx-EVZ Manuel utilisateur

Intersil

Intersil ISL28208SOICEVAL2Z Manuel utilisateur

Intersil

Intersil ISL70003ASEHEV2Z Manuel utilisateur

Intersil

Intersil ISL73033SLHEV1Z Manuel utilisateur

Intersil

Intersil ISL32740EVAL2Z Manuel utilisateur

Intersil

Intersil ISL91108IIA-EVZ Manuel utilisateur

Intersil

Intersil ISL85014EVAL1Z Manuel utilisateur

Intersil

Intersil ISL54200EVAL1Z Manuel utilisateur

Intersil

Intersil ISL281X7MSOPEVAL1Z Manuel utilisateur

Manuels Carte mère populaires d'autres marques

DFI

DFI SD170 Manuel utilisateur

ASROCK

ASROCK ROMED8-2T Manuel utilisateur

Asus

Asus P2L97A Manuel utilisateur

Winmate

Winmate IC70 Manuel utilisateur

Asus

Asus MES-B Manuel utilisateur

Grantech

Grantech SYS8F377VGGA-3OMN Manuel utilisateur

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Manuel utilisateur

Gigabyte

Gigabyte GA-9IVDT Manuel utilisateur

Texas Instruments

Texas Instruments ADS8372EVM Manuel utilisateur

Commell

Commell MS-C73 Manuel utilisateur

IBT Technologies

IBT Technologies MB860 Manuel utilisateur

Nvidia

Nvidia TEGRA DG-04927-001_V01 Manuel utilisateur

Biostar

Biostar M7VIT Bravo Instructions d'utilisation et d'installation

Intel

Intel D33217CK Manuel utilisateur

Asus

Asus F1A55-M LX PLUS R2.0 Manuel utilisateur

EPC

EPC EPC9147C Manuel utilisateur

Asus

Asus EX-B760M-V5 D4 Manuel utilisateur

EPOX

EPOX MU-8KHA0010 Manuel utilisateur