Intermec CV41 Manuel utilisateur

Vehicle Mounting Kit

CV41

Reference Guide

All manuals and user guides at all-guides.com

all-guides.com

ii CV41 Vehicle Mounting Kit Reference Guide

Contents

CV41 Vehicle Mounting Kit Reference Guide . . . . . . . . . . . 3

About the Mounting Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Safety Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

What You Need . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Mount the Smart Dock to a Vehicle . . . . . . . . . . . . . . 4

About the 10-60 VDC Power Cable. . . . . . . . . . . . . . . . . . . . . 6

Safety Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

What You Need . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Install the 10-60 VDC Power Cable . . . . . . . . . . . . . . . 8

Connect the AC/DC Power Supply. . . . . . . . . . . . . . . . . . . . . 9

Attach the CV41 to the Smart Dock. . . . . . . . . . . . . . . . . . . 10

All manuals and user guides at all-guides.com

CV41 Vehicle Mounting Kit Reference Guide 3

CV41 Vehicle Mounting Kit Reference

Guide

The CV41 Vehicle Mount Computer seamlessly integrates with

any forklift for your warehouse operations. Use this reference

guide to learn how to mount and power your computer.

This reference guide explains how to:

•mount the smart dock to a vehicle.

•install the 10-60 VDC power cable.

•connect the AC/DC power supply.

•attach the CV41 to the smart dock.

For information on how to connect the 6-96 DC/DC converter

kit, use the Universal Vehicle Power Supply Instructions that ship

in the box with the kit.

About the Mounting Kits

Mount the smart dock to a vehicle with an Intermec mounting

kit to restrain and isolate the computer from shocks and

vibrations that may potentially damage it. After you mount the

smart dock, attach the CV41 to it.

For more information on available mounting kit types or sizes,

contact your local Intermec representative.

Safety Information

Before you install the mounting kit on a forklift, make sure you

select a mounting location where:

•the computer does not obstruct the driver’s vision or safe

operation of the vehicle.

•the driver can easily access the comptuer while seated.

•the computer is protected from rain, inclement weather, and

high concentrations of dust and debris.

Mounting and connecting power to the computer should be

performed by trained service personnel only. Additionally,

using hardware that is not approved by Intermec may void

the warranty of the computer.

All manuals and user guides at all-guides.com

4 CV41 Vehicle Mounting Kit Reference Guide

What You Need

Use the following tools and parts to mount the smart dock to a

vehicle.

•Phillips screwdriver

•Torque wrench

•Mounting hardware (if attaching a flat base to the vehicle)

Mount the Smart Dock to a Vehicle

After you purchase the appropriate mounting hardware, secure

the smart dock to a vehicle with a mounting kit.

To mount the smart dock to a vehicle

1Select a mounting location.

2Attach a flat base to the smart dock using the four screws

and washers provided.

(x4)

All manuals and user guides at all-guides.com

CV41 Vehicle Mounting Kit Reference Guide 5

3If you are attaching a flat base to the vehicle, drill and tap

holes to a surface on the vehicle and secure the flat base using

your own mounting hardware.

If you are attaching a mounting clamp base to the vehicle,

attach the upper and lower clamp to a beam and secure the

clamp base using the screws and nuts provided to a torque

value of 0.95 - 1.10 N/m (17-20 in/lb). For large beams, you

may need to supply your own hardware.

(x4)

(x2)

All manuals and user guides at all-guides.com

6 CV41 Vehicle Mounting Kit Reference Guide

4Place the pivot arm over the two bases and tighten the knob

on the pivot arm to securely mount the smart dock.

About the 10-60 VDC Power Cable

The 10-60 VDC power cable is included with your smart dock

and allows you to make a powered connection from the smart

dock directly to the vehicle.

Note: If you are connecting the 6-96 DC/DC converter kit, use

the Universal Power Supply Instructions to learn how to connect

it to your forklift.

All manuals and user guides at all-guides.com

all-guides.com

CV41 Vehicle Mounting Kit Reference Guide 7

Before you connect the power cable, determine which startup

behavior you want to use.

Safety Information

Before you install the 10-60 VDC power cable, make sure that

you:

•route cables the shortest way possible so that it does not

interfere with the safe operation and maintenance of the

vehicle, while removing any excess cable that is left over.

•use cable clamps or wire-ties to secure the cable at least every

46 cm (18 in).

•protect the cable from physical damage or surfaces that may

exceed 105 ºC (221 ºF).

•do not expose any cables to chemicals or oils that may cause

the wiring insulation to deteriorate.

What You Need

Use the following parts and tools to install the power cable:

•Common hand tools, such as a wrench

•Cable clamps or wire-ties

•Wire crimping and stripping tools

•10 A maximum time-delay (slow-blow ) high-interrupting

rated fuse. For North America, use a UL listed fuse.

•Electric drill and drill bits

CV41 Startup Behavior Options

Startup Behavior Description

Manual The computer is turned on and off manually using the

Power button on the computer and smart dock.

Ignition Control After the ignition is turned on, the computer turns on.

The computer goes into Suspend mode when you turn off

the ignition to your vehicle.

Auto-On After vehicle power is applied or when the Power switch

on the smart dock is turned on, the computer turns on.

All manuals and user guides at all-guides.com

8 CV41 Vehicle Mounting Kit Reference Guide

Install the 10-60 VDC Power Cable

Before you install the power cable, make sure that the CV41 is

not attached to the smart dock, and the power switch on the

dock is in the off position.

To install the 10-60 VDC power cable

1Connect the negative (black) wire to the negative terminal on

the battery.

2Attach a 10 A fuse to the positive (red) wire and connect it to

the positive terminal on the battery.

3For a manual or Auto-On connection, leave the ignition

(blue) wire disconnected, and cut the wire as close to the

cable jacket as possible to avoid any short circuits.

For an ignition controlled connection, connect the ignition

(blue) wire to the ignition circuitry of the forklift.

4Secure the grounding (green) wire to the vehicle chassis of

the forklift for electrostatic discharge (ESD) protection. If

the vehicle chassis is not a suitable ground, connect the wire

to the negative terminal of the power source.

5Attach the CV41 to the smart dock. For help, see “Attach the

CV41 to the Smart Dock” on page 10.

10 A fuse

Ignition

(optional)

Ground Grounding

(green) wire

Ignition

(blue) wire

Positive

(red) wire

Negative

(black) wire

All manuals and user guides at all-guides.com

CV41 Vehicle Mounting Kit Reference Guide 9

6If you have a CV41 running Windows Embedded Standard:

aTap Start > Control Panel > AutoOn.

bSelect a startup behavior.

cTap OK.

If you have a CV41 running Windows CE:

aTap Start > Control Panel > the Misc tab > AutoOn.

bSelect a startup behavior.

cTap OK.

Connect the AC/DC Power Supply

Use the AC/DC power supply if you are not mounting the

computer to a forklift. The power supply kit comes with a North

American AC power cord. For other countries, you must supply

your own power cord.

When you connect this power supply, make sure that you are

connected to a properly grounded source with a maximum of

15 A overcurrent protection (10 A for 230 V circuits).

CV41 AC/DC Power Supply Parts

Note: The AC/DC power supply and cables are intended for use

in 25 °C (77 °F) maximum ambient temperature environment.

AC power cord

Power

supply

Output

cable

All manuals and user guides at all-guides.com

10 CV41 Vehicle Mounting Kit Reference Guide

To connect the AC/DC power supply

1Connect the one end of the AC power cord to the power

supply and the other end to wall plug.

2Connect one end of the output cable to the power supply and

the other end to the CV41.

3Fasten the connector by twisting it clockwise.

Attach the CV41 to the Smart Dock

After you mount the smart dock and supply power, you can

attach the CV41 and turn on the computer.

To attach the CV41 to the smart dock

1Make sure that the computer is turned off.

2Locate the protruding lip on the rear of the computer.

3Place the lip of the computer over the top of the dock.

4Slide the computer from side-to-side until it is seated into

the smart dock.

5Push the computer down onto the smart dock until you hear

a click.

6If necessary, adjust the viewing angle by adjusting the pivot

arm.

All manuals and user guides at all-guides.com

Autres manuels pour CV41

Table des matières

Autres manuels Intermec Terminal tactile

Intermec

Intermec Trakker Antares 2480 Manuel utilisateur

Intermec

Intermec 5900 SERIES Manuel utilisateur

Intermec

Intermec Trakker Antares 2460 Manuel

Intermec

Intermec 1100 Series Manuel utilisateur

Intermec

Intermec Trakker Antares 2475 Manuel utilisateur

Intermec

Intermec Data Collection PC 5020 Instructions et recettes

Intermec

Intermec CV41C Manuel utilisateur

Intermec

Intermec TE 2000 Manuel

Intermec

Intermec Trakker Antares 2480 Manuel

Intermec

Intermec Trakker Antares 243X Manuel utilisateur

Intermec

Intermec Trakker Antares 2460 Manuel utilisateur

Intermec

Intermec Trakker Antares 2420 Manuel utilisateur

Intermec

Intermec 6540 Manuel utilisateur

Intermec

Intermec 1700 Series Manuel utilisateur

Intermec

Intermec Trakker Antares 241 Series Manuel utilisateur

Intermec

Intermec Trakker Antares 2475 Manuel utilisateur

Intermec

Intermec 243XHand-HeldTerminal 243X Manuel utilisateur

Intermec

Intermec CK3 Series Manuel utilisateur

Intermec

Intermec Trakker Antares 2480 Manuel utilisateur

Intermec

Intermec Trakker Antares 2455 Manuel utilisateur

Manuels Terminal tactile populaires d'autres marques

Wincor Nixdorf

Wincor Nixdorf iPOS plus Advanced Manuel utilisateur

Ingenico

Ingenico AXIUM EX4000 Manuel utilisateur

Heisei Electronics

Heisei Electronics Q-POS 815 Manuel utilisateur

Amano

Amano MTX-15 Manuel utilisateur

FLOWBIRD

FLOWBIRD CWT Compact Touch Manuel utilisateur

Demco

Demco SP7 Manuel utilisateur

Lathem

Lathem PC600 Series Manuel utilisateur

Partner

Partner MF-2352 Manuel utilisateur

NCR

NCR RealPOS 7460-2 Manuel

Simrad

Simrad MS50 Instructions de montage

Unitech

Unitech MR350 MKII Guide de démarrage rapide

Jungheinrich

Jungheinrich WMT 210 Manuel utilisateur

Motorola

Motorola MTP850 Manuel utilisateur

YASKAWA

YASKAWA 62H-MDC0 Manuel utilisateur

MVG industries

MVG industries NeptuLink Manuel utilisateur

Price Industries Limited

Price Industries Limited FDC Manuel d'instructions

Honeywell

Honeywell TemaKey Manuel utilisateur

EBN

EBN BPC65-B-A16G Manuel utilisateur