Intermec PB22 Manuel utilisateur

PB22&PB32 Portable Label and Receipt Printer

User’s

Guide

Intermec Technologies Corporation

Worldwide Headquarters

6001 36th Ave.W.

Everett, WA 98203

U.S.A.

www.intermec.com

The information contained herein is provided solely for the purpose of allowing customers to

operate and service Intermec-manufactured equipment and is not to be released, reproduced, or

used for any other purpose without written permission of Intermec Technologies Corporation.

Information and specifications contained in this document are subject to change without prior

notice and do not represent a commitment on the part of Intermec Technologies Corporation.

The word Intermec, the Intermec logo, Norand, ArciTech, Beverage Routebook, CrossBar,

dcBrowser, Duratherm, EasyADC, EasyCoder, EasySet, Fingerprint, i-gistics, INCA (under license),

Intellitag, Intellitag Gen2, JANUS, LabelShop, MobileLAN, Picolink, Ready-to-Work, RoutePower,

Sabre, ScanPlus, ShopScan, Smart Mobile Computing, SmartSystems, TE 2000, Trakker Antares,

and Vista Powered are either trademarks or registered trademarks of Intermec Technologies

Corporation.

There are U.S. and foreign patents as well as U.S. and foreign patents pending.

Wi-Fi is a registered certification mark of the Wi-Fi Alliance.

Bluetooth is a trademark of Bluetooth SIG, Inc., U.S.A.

PB22/PB32 Portable Label and Receipt Printer User’s Guide ii

Before You Begin

This section provides you with safety information, technical support

information, and sources for additional product information.

Safety Information

Your safety is extremely important. Read and follow all warnings and

cautions in this document before handling and operating Intermec

equipment. You can be seriously injured, and equipment and data can

be damaged if you do not follow the safety warnings and cautions.

This section explains how to identify and understand warnings,

cautions, and notes that are used in this document.

A warning alerts you of an operating procedure, practice,

condition, or statement that must be strictly observed to avoid

death or serious injury to the persons working on the equipment.

A caution alerts you to an operating procedure, practice,

condition, or statement that must be strictly observed to prevent

equipment damage or destruction, or corruption or loss of data.

Note: Notes either provide extra information about a topic or contain

special instructions for handling a particular condition or set of

circumstances.

Global Services and Support

Warranty Information

To understand the warranty for your Intermec product, visit the

Intermec web site at www.intermec.com and click Support >

Returns and Repairs > Warranty.

PB22/PB32 Portable Label and Receipt Printer User's Guidevi

Before You Begin

Web Support

Visit the Intermec web site at www.intermec.com to download our

current manuals (in PDF). To order printed versions of the Intermec

manuals, contact your local Intermec representative or distributor.

Visit the Intermec technical knowledge base (Knowledge Central) at

intermec.custhelp.com to review technical information or to request

technical support for your Intermec product.

Telephone Support

In the U.S.A. and Canada, call 1-800-755-5505.

Outside the U.S.A. and Canada, contact your local Intermec

representative. To search for your local representative, from the

Intermec web site, click About Us > Contact Us.

Service Location Support

For technical support in South Korea, use the after service locations

listed below:

AWOO Systems

102-1304 SK Ventium

522 Dangjung-dong

Gunpo-si, Gyeonggi-do Korea, South 435-776

Contact: Mr. Sinbum Kang

Telephone: +82-31-436-1191

Email: [email protected]

Sammi Information Systems Co Ltd

7-9FL, Seo Jo Building

103-15, Galwor-Dong

Seoul, Yong San-ku Korea, South 140-807

Contact: Kyung-Hee Koo

Telephone: +82-2-790-5508

Email: jlovekoo@sammicomputer.co.kr

Who Should Read This Manual

This user’s guide is for the person who is responsible for installing,

configuring, and maintaining the PB22/PB32 printer.

PB22/PB32 Portable Label and Receipt Printer User's Guide vii

Before You Begin

This guide provides you with information about the features of the

PB22/PB32, and how to install, configure, operate, maintain, and

troubleshoot it.

Before you work with the PB22/PB32, you should be familiar with

your network and general networking terms, such as IP address.

Related Documents

This table contains a list of related Intermec documents and their

part numbers.

Document Title Part Number

Intermec Fingerprint Programmer’s Reference Manual 937-005-xxx

Intermec Printer Language (IPL) Developer’s Guide 934-013-xxx

Intermec Printer Language (IPL) Command Reference 937-007-xxx

Manual

ESC/P Programmer’s Reference Manual. 937-010-xxx

The Intermec web site at www.intermec.com contains our

documents (as PDF files) that you can download for free.

To download documents

1 Visit the Intermec web site at www.intermec.com.

2 Click Support > Manuals.

3 Use the Product Category field, the Product Family field, and

the Product field to help you locate the product whose

documentation you want to download.

PB22/PB32 Portable Label and Receipt Printer User's Guideviii

1 Using the PB22/PB32 Portable

Label and Receipt Printer

Use this chapter to familiarize yourself with the PB22/PB32

Portable Label and Receipt Printer. In this chapter you will

find these sections:

•Learning About the PB22/PB32 Mobile Label

Printer

•Using the Batteries

•Loading Media

•Printing a Test Page

Chapter 1 — Using the PB22/PB32 Portable Label and Receipt Printer

Learning About the PB22/PB32 Mobile Label and

Receipt Printer

The PB22/PB32 is a rugged direct thermal label and receipt printer

that is designed for use with the CK3x, 700 series, CK6x, CN3, CN3e,

CK3, CV30, and CV60 mobile computers as well as the SF51

and SR61 scanners. The PB22 uses 50.8 mm (2 in) media and the

PB32 uses 76.2 mm (3 in) media.

The PB22/PB32 provides:

• print resolution of 203 dpi.

• print speeds of up to 100 mm per second (4 ips).

• 802.11 or Bluetooth radio options.

Identifying the Parts of the Printer

Use this illustration to familiarize yourself with some of the features

of the PB22/PB32.

Self-strip door

Communication port

Media cover

release button

Control panel

Ready-to-Work

indicator

PB22/PB32 Printer: This illustration shows the important features of the

PB22/PB32 printer. A weather-resistant flap protects the communications

ports and the external power connector.

PB22/PB32 Porotable Label and Receipt Printer User’s Guide2

Chapter 1 — Using the PB22/PB32 Portable Label and Receipt Printer

Understanding the Control Panel

The PB22/PB32 control panel contains four buttons, a liquid crystal

display (LCD), and one LED indicator. Use the four buttons to

navigate the menu system and perform functions on the PB22/PB32

printer. See the following tables to understand the buttons, the menu

system, and what the LED means.

SETUP:

SER-COM

Standby button Info button

Feed button Setup button

Ready-to-Work

indicator

Understanding How to Use the PB22/PB32 Buttons

Button

Name Button Function

Feed Press to advance label or receipt paper. The amount of

media that feeds is dependent on the type of media you

are using. It will advance by 5 mm (0.2 inch), feed out

an entire label, or feed a configured length of media

based on your media and settings.

If the printer is printing, pressing this button causes

the printer to pause. Press the button again to resume

printing.

Setup Press to display the Setup menu. Not used with ESC/P

firmware.

Standby Press to put the printer in Standby mode. In Standby

(Power) mode, power to the radio, the display, and the

backlight are turned off.

Press to turn the printer back on and put in Ready

mode.

PB22/PB32 Portable Label and Receipt Printer User’s Guide 3

Chapter 1 — Using the PB22/PB32 Portable Label and Receipt Printer

Understanding How to Use the PB22/PB32 Buttons (continued)

Button

Name Button Function

Info Press to display a summary of network connection

information and error conditions. Each setting in the

summary information displays on the screen for five

seconds.

All of the buttons can act as “soft keys,” which means that the

function of each button depends on the state of the printer. A small

icon appears in the screen next to the button to indicate the function

it performs.

Understanding the Soft Keys

Button Soft Keys Description

• Moves up one level in the menu system. This soft

key appears in Setup mode.

•Increases the value of a number when editing

settings such as an IP address. This soft key

appears in Setup mode.

•Pauses the printing job. This icon appears only

when you are printing.

Exit Setup mode and return to Ready mode.

Moves through the settings at the same level in the

menu system.

•Moves down one level in the menu system and

saves changes to a setting.

•Exits a printing job or exits Information mode.

PB22/PB32 Porotable Label and Receipt Printer User’s Guide4

Chapter 1 — Using the PB22/PB32 Portable Label and Receipt Printer

There is only one LED on the PB22/PB32 printer: the Ready-to-

Work™indicator.

Understanding the Ready-to-Work Indicator

Indicator State Description

Off When the light is off, it can mean one of several

conditions:

•The printer is in Standby mode.

•The printer is in Info mode.

•The printer is in Setup mode.

On The PB22/PB32 is turned on and operating.

Blinking A blinking light can mean one of several conditions:

•The printer is out of paper.

•The media cover is open.

•There is a printer error that requires you to perform an

action. For a list of possible problems, see

“Troubleshooting the PB22/PB32” on page 42.

Understanding the Printer Firmware

Your PB22/PB32 printer comes with Intermec Printer Language (IPL),

Fingerprint, or Intermec Receipt Protocol (ESC/P) firmware. The

choice of firmware affects the functionality of the printer and how

you interact with it. This manual contains information for using the

different types of printer firmware.

When the printer is shipped from the factory, the first person to turn

on the printer will have the option of choosing which printer

firmware to run on the printer. Press the appropriate button to

choose a firmware type.

IPL

ESCP

Choosing the Printer Firmware

PB22/PB32 Portable Label and Receipt Printer User’s Guide 5

Autres manuels pour PB22

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Intermec Étiqueteuse

Intermec

Intermec 4630 Manuel utilisateur

Intermec

Intermec EasyCoder 4420 Manuel utilisateur

Intermec

Intermec EasyCoder 301 Manuel utilisateur

Intermec

Intermec EasyCoder PD4 Manuel utilisateur

Intermec

Intermec PB50 Manuel utilisateur

Intermec

Intermec 3400 Manuel utilisateur

Intermec

Intermec EasyCoder F4 Instructions d'utilisation d'origine

Intermec

Intermec EasyCoder PC4 Manuel utilisateur

Intermec

Intermec ColorCoder V4 Manuel utilisateur

Intermec

Intermec EasyCoder PD4 Manuel utilisateur

Intermec

Intermec EasyCoder PX4i Manuel utilisateur

Intermec

Intermec EasyCoder PD41 Manuel utilisateur

Intermec

Intermec PM4I Manuel utilisateur

Intermec

Intermec EasyCoder 201II Manuel utilisateur

Intermec

Intermec PB22 Manuel utilisateur

Intermec

Intermec EasyCoder PC41 Manuel utilisateur

Intermec

Intermec EasyCoder 501XP Instructions d'utilisation d'origine

Intermec

Intermec EasyCoder PD41 Manuel utilisateur

Intermec

Intermec EasyCoder 501XP Manuel utilisateur

Intermec

Intermec EasyCoder PX4i Manuel utilisateur

Intermec

Intermec PM4I Manuel utilisateur

Intermec

Intermec EasyCoder PX4i Manuel utilisateur

Intermec

Intermec EasyCoder 501 E Mode d’emploi

Intermec

Intermec PC23 Manuel utilisateur

Manuels Étiqueteuse populaires d'autres marques

Brother

Brother P-Touch 2420PC Manuel utilisateur

newell

newell Dymo LabelManager 210D Manuel utilisateur

Brother

Brother TD-4000 Manuel utilisateur

U-Line

U-Line BROTHER H-8754 Manuel utilisateur

Tharo Systems

Tharo Systems H-435+ Manuel utilisateur

Brother

Brother E300 Manuel utilisateur

Godex

Godex RT700 SERIES Manuel utilisateur

ID Technology

ID Technology 252 Manuel utilisateur

Labelmate

Labelmate MC-11 Manuel utilisateur

CAB

CAB XD4M/300 Manuel utilisateur

Avery Dennison

Avery Dennison Pathfinder 6057 Manuel de service

Brother

Brother P-touch PT-9700PC Manuel utilisateur

TSC

TSC PEX1000 Series Manuel utilisateur

Adkins

Adkins Label Master Manuel utilisateur

Epson

Epson LabelWorks LW-400 Manuel utilisateur

Primera

Primera 510212 Manuel utilisateur

Brady

Brady BradyPrinter S3100 Manuel utilisateur

DuraLabel

DuraLabel LabPRO Manuel utilisateur