Intermec EasyCoder PX4i Manuel utilisateur
EasyCoder® Printer
RFID Kit
PX4i, PX6i
Installation
Instructions
ii EasyCoder Printer (PX4i and PX6i) RFID Kit Installation Instructions
Intermec Technologies Corporation
Worldwide Headquarters
6001 36th Ave.W.
Everett, WA 98203
U.S.A.
www.intermec.com
The information contained herein is provided solely for the purpose of allowing
customers to operate and service Intermec-manufactured equipment and is not to be
released, reproduced, or used for any other purpose without written permission of
Intermec Technologies Corporation.
Information and specifications contained in this document are subject to change
without prior notice and do not represent a commitment on the part of Intermec
Technologies Corporation.
© 2009 by Intermec Technologies Corporation. All rights reserved.
The word Intermec, the Intermec logo, Norand, ArciTech, Beverage Routebook,
CrossBar, dcBrowser, Duratherm, EasyADC, EasyCoder, EasySet, Fingerprint, INCA
(under license), i-gistics, Intellitag, Intellitag Gen2, JANUS, LabelShop, MobileLAN,
Picolink, Ready-to-Work, RoutePower, Sabre, ScanPlus, ShopScan, Smart Mobile
Computing, SmartSystems, TE 2000, Trakker Antares, and Vista Powered are either
trademarks or registered trademarks of Intermec Technologies Corporation.
There are U.S. and foreign patents pending.
EasyCoder Printer (PX4i and PX6i) RFID Kit Installation Instructions 3
What Is the RFID Kit?
The RFID kit provides RFID functionality for the EasyCoder®
PX4i and PX6i printers. With this kit installed, the PX4i or PX6i
printer can read and write to RFID tags.
These instructions describe how to install these RFID kits:
•PX4i 915 MHz RFID Kit (P/N 270-153-001)
•PX4i 869 MHz RFID Kit (P/N 270-155-001)
•PX6i 915 MHz RFID Kit (P/N 270-154-001)
•PX6i 869 MHz RFID Kit (P/N 270-156-001)
For more information about using RFID features on the
PX4i or PX6i, see the EasyCoder Printer RFID User’s Guide
(P/N 934-041-xxx).
What You Get
•One of these I/O interface boards:
•I/O interface board with IM4 869 MHz radio module
•I/O interface board with IM4 915 MHz radio module
•One of these lower media guides:
•PX4i lower media guide with RFID antenna
•PX6i lower media guide with RFID antenna
•Dual slot I/O cable
•M3x5 screw (2)
•M4x5 screw
•Spacer screw
What You Need
•A PX4i or PX6i printer running Fingerprint v8.76.0 or later
or IPL v2.76.0 or later. You can download the latest version of
firmware from the Intermec web site at www.intermec.com.
•A #T10 and a #T20 Torx screwdriver.
•A slotted screwdriver.
4 EasyCoder Printer (PX4i and PX6i) RFID Kit Installation Instructions
Installing the RFID Kit
To install the RFID kit
1Open the front door and right side door.
The installation described in this section must only be
performed by an authorized service technician. Intermec
assumes no responsibility for personal injury or damage to
the equipment if the installation is performed by an
unauthorized person.
Follow standard ESD guidelines to avoid damaging the
equipment you are servicing.
Before you begin, turn off the printer and disconnect the
power cord and communication cables.
Note: This procedure applies to both the PX4i and PX6i. For
simplicity, the PX4i is depicted in the illustrations.
EasyCoder Printer (PX4i and PX6i) RFID Kit Installation Instructions 5
2Remove the eight #T10 Torx screws and remove the left side
door.
3Release the lower media guide latch.
Screw
(8 places)
Lower media
guidelatch
6 EasyCoder Printer (PX4i and PX6i) RFID Kit Installation Instructions
4Carefully remove the lower media guide and upper media
guide assembly.
5Remove the upper media guide from the lower media guide.
6Route the antenna cable from the RFID lower media guide
through the opening in the print engine base. Make sure to
route the cable in front of the label stop sensor (LSS) guide
bar.
Upper andlower media
guide assembly
EasyCoder Printer (PX4i and PX6i) RFID Kit Installation Instructions 7
7Slide the RFID lower media guide into the printer. Insert the
pins on the guide into the holes on the print engine base.
8Snap the RFID lower media guide into place.
9Insert the upper media guide.
10 On the back of the printer, remove the two screws that secure
the cover plate to slot 1 or slot 2, and remove the cover plate.
11 Connect the dual slot I/O cable to the main board.
RFID lower
media guide
Note: You need to use the first available slot on the printer
starting from the left (slot 1).
Screw
(2 places)
Slot 1 Slot 2
Dual slot I/O cable
8 EasyCoder Printer (PX4i and PX6i) RFID Kit Installation Instructions
12 Connect the dual slot I/O cable to the RFID interface board.
Use the connector 1 for slot 1 and connector 2 for slot 2.
13 Slide the RFID interface board into the printer.
14 Secure the RFID interface board with the two screws you
removed in Step 9 or with the two included M3x5 screws.
15 Secure the RFID interface board to the circuit board with the
M4x5 screw and spacer screw. For slot 1, use the spacer screw
on the main board. For slot 2, use the spacer screw in the kit.
16 Connect the antenna cable to the RFID interface board.
17 Attach the left side door to the printer.
18 Close the front and right side doors.
Connector 1
Connector 2
EasyCoder Printer (PX4i and PX6i) RFID Kit Installation Instructions 9
10 EasyCoder Printer (PX4i and PX6i) RFID Kit Installation Instructions
Autres manuels pour EasyCoder PX4i
12
Ce manuel convient aux modèles suivants
5
Table des matières
Autres manuels Intermec Étiqueteuse
Intermec
Intermec EasyCoder 201II Manuel utilisateur
Intermec
Intermec 4630 Manuel utilisateur
Intermec
Intermec PB22 Manuel utilisateur
Intermec
Intermec EasyCoder F2 Manuel utilisateur
Intermec
Intermec EasyCoder 401 Manuel utilisateur
Intermec
Intermec EasyCoder PF4i Manuel utilisateur
Intermec
Intermec EasyCoder PX4i Manuel utilisateur
Intermec
Intermec EasyCoder 501XP Instructions d'utilisation d'origine
Intermec
Intermec 3240 Manuel utilisateur
Intermec
Intermec EasyCoder 4420 Manuel utilisateur
Intermec
Intermec EasyCoder 3400e Manuel utilisateur
Intermec
Intermec EasyCoder PD4 Manuel utilisateur
Intermec
Intermec 4400 Manuel utilisateur
Intermec
Intermec 3400 Manuel utilisateur
Intermec
Intermec PB22 Manuel utilisateur
Intermec
Intermec EasyCoder 301 Manuel utilisateur
Intermec
Intermec EasyCoder PX6i Manuel utilisateur
Intermec
Intermec EasyCoder PF4i Manuel utilisateur
Intermec
Intermec EasyCoder 4420 Manuel utilisateur
Intermec
Intermec PM4I Manuel utilisateur
