Intermec FlexDock DX1 Manuel utilisateur
FlexDock
DX1, DX2, DX4
User Guide
ii FlexDock User Guide
Intermec Technologies Corporation
Worldwide Headquarters
6001 36th Ave.W.
Everett, WA 98203
U.S.A.
www.intermec.com
The information contained herein is provided solely for the purpose of allowing customers to
operate and service Intermec-manufactured equipment and is not to be released, reproduced, or
used for any other purpose without written permission of Intermec Technologies Corporation.
Information and specifications contained in this document are subject to change without prior
notice and do not represent a commitment on the part of Intermec Technologies Corporation.
© 2011-2013 by Intermec Technologies Corporation. All rights reserved.
The word Intermec, the Intermec logo, Norand, ArciTech, Beverage Routebook, CrossBar,
dcBrowser, Duratherm, EasyADC, EasyCoder, EasySet, Fingerprint, i-gistics, INCA (under license),
Intellitag, Intellitag Gen2, JANUS, LabelShop, MobileLAN, Picolink, Ready-to-Work, RoutePower,
Sabre, ScanPlus, ShopScan, Smart Mobile Computing, SmartSystems, Trakker Antares, and Vista
Powered are either trademarks or registered trademarks of Intermec Technologies Corporation.
There are U.S. and foreign patents as well as U.S. and foreign patents pending.
FlexDock User Guide iii
Document Change Record
This page records changes to this document. The document was
originally released as Revision 001.
Version
Number Date Description of Change
005 8/2013 Added support for the SF61 scanner.
004 3/2012 Added support for the PR2 and PR3 printers.
003 7/2011 Added support for the CK3, CN3, and CN4 computers.
002 4/2011 Added additional troubleshooting information,
specifications, and support for the CN50 and CS40
computers.
iv FlexDock User Guide
Contents
FlexDock User Guide v
Contents
About the FlexDocks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
What You Need . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Connect the DX1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
Connect the DX2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Connect the DX4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Charge Batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
Charge Computers, Printers, and Scanners . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
About the Ethernet LEDs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Use the CK3, CN3, and CN4 with the DX4 Ethernet Dock. . . . . . . . . . . . . . . . . . .14
About Custom Configurations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
Troubleshoot the FlexDock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Optional FlexDock Accessories. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
vi FlexDock User Guide
FlexDock User Guide 7
About the FlexDocks
The FlexDocks power your Intermec computers, printers, and
scanners, and charge spare batteries. Each dock is available with a
combination of product cups and battery cups to match your
Intermec products and batteries. Each battery cup can charge up to
two batteries at once.
The FlexDocks include the DX1 Desktop Dock, the DX2 Dual Dock,
and the DX4 Quad Dock.
DX1 Desktop Dock and DX2 Dual Dock: DX2 is also available with two product
cups or two battery cups.
8 FlexDock User Guide
DX4 Quad Dock: DX4 is also available with other combinations of product and
battery cups.
The DX1 Desktop Dock has one computer cup and one battery cup.
You can connect the DX1 to a desktop PC through its USB port.
The DX2 Dual Dock has two cups, and the DX4 Quad Dock has four
cups. Computers in the DX2 and DX4 docks can connect to your
Ethernet network (except for charge-only docks), and other Ethernet
devices can be connected to your network through the dock.
What You Need
You need these accessories to use the FlexDocks:
•AC power cord for your region
•Ethernet cable (Ethernet docks only)
•Micro-USB cable (DX1 only)
For information on these and other accessories, contact your local
Intermec representative.
Note: Use the optional Ethernet Adapter (P/N 871-238-001) to
connect the DX1 to your network. Or, use the optional Modem
Adapter (P/N 871-238-002) to connect the DX1 to a phone line. For
information, contact your local Intermec representative.
FlexDock User Guide 9
Connect the DX1
7
About the DX1 USB Ports
Use the USB client port (requires a Micro-USB connector) to connect
the DX1 to your desktop PC. The USB host port is intended for use
with the Ethernet or Modem Adapter accessories. Other USB devices
may not be supported.
If you are using the DX1 with the CS40 computer:
•use USB cables that are 2 meters (6 feet) or shorter.
•multiple concurrent USB connections are not supported.
Connections to the USB client port receive priority over
connections to the USB host port.
For more information on connecting USB devices to your Intermec
computer, see the computer user manual.
Install the Optional Retaining Clip
For the DX1 and DX2, you can use the optional retaining clip to
secure the power supply cord to the dock.
To power
supply
USB client
port
USB host
port
10 FlexDock User Guide
Optional Power Cord Retaining Clip for DX1 and DX2: DX1 shown here.
Connect the DX2
To Ethernet
devices
(Ethernet
docks only)
To Ethernet
network
(Ethernet
docks only)
To power
supply
Note: To install the optional retaining clip for the power cord, see the
previous section.
Autres manuels pour FlexDock DX1
4
Ce manuel convient aux modèles suivants
2
Table des matières
Autres manuels Intermec Station d'accueil
Intermec
Intermec FlexDock DX2 Manuel utilisateur
Intermec
Intermec Trakker Antares 2400 Manuel utilisateur
Intermec
Intermec JD2010 Manuel utilisateur
Intermec
Intermec AV10 Manuel utilisateur
Intermec
Intermec AV8 Manuel utilisateur
Intermec
Intermec CN3 Series Manuel utilisateur
Intermec
Intermec AD10 Manuel utilisateur
Intermec
Intermec Janus 2020 Manuel utilisateur
Intermec
Intermec AV6 Manuel utilisateur
Intermec
Intermec CN3 Series Manuel utilisateur
Intermec
Intermec CN2 Manuel utilisateur
Intermec
Intermec FlexDock DX1 Manuel utilisateur
Intermec
Intermec AD10 Manuel
Intermec
Intermec CK60 Vehicle Dock Manuel utilisateur
Intermec
Intermec AV5 Manuel utilisateur
Intermec
Intermec FlexDock Manuel utilisateur
Intermec
Intermec AV6 Manuel utilisateur
Intermec
Intermec 700 Series Manuel utilisateur
Intermec
Intermec CK60 Ethernet Multidock Manuel utilisateur
Intermec
Intermec CK61 Manuel utilisateur
