Interlogix TruVision TVP-5104 Feuille d'instructions

TruVision IP PTZ Camera

Configurat

ion Manual

P/N 1073399-EN • REV A • ISS 15MAY18

Copy

right

2018 United Technologies Corporation.

Interlogix is part of UTC

Climate, Controls & Security

, a unit of United

Technologies Corporation.

Trademarks and

patents

rade names used in this document may be trademarks or

registered trademarks of the manufacturers or vendors of the

respective products.

Manufacturer

Interlogix

2955 Red Hill Avenue, Costa Mesa, CA 92626

-5923, USA

Authorized EU manufacturing representative:

UTC Fire & Secu

rity B.V.

Kelvinstraat 7, 6003 DH Weert, The Netherlands

Contact information

and manuals / tools /

firmware

For contact information and to download the latest manuals, tools,

and firmware, go to the web site of your region.

Americas: www.interlogix.com

MEA: www.firesecurityproducts.com

Manuals are available in several languages

Australia/New Zealand: www.utcfs.com.au

TruVision IP PTZ Camera Configuration Manual 1

Content

Introduction 3

Contact information and manuals/tools/firmware 3

Network connection 4

Checking your web browser security level 4

Activating the camera 5

Overview of the camera web browser 8

Camera configuration 10

Configuration menu overview 10

Local configuration 11

System time 12

Network settings 14

Recording parameters 18

ROI encoding of an image 21

PTZ parameters 22

Overlay text 33

Video image 34

OSD 37

Image parameters switch 38

Motion detection alarms 39

Tamper-proof alarms 41

Alarm input 42

Alarm output 43

Exception alarms 43

Audio exception detection 44

Face Detection 45

Intrusion detection 47

Line crossing detection 48

Region entrance detection 50

Region exiting detection 51

Unattended baggage detection 52

Object removal detection 54

RS-485 settings 55

Recording schedule 56

Format storage devices 57

NAS settings 58

Snapshot parameters 59

Camera management 61

User management 61

RTSP authentication 63

IP address filter 64

Defining the security service 65

2 TruVision IP PTZ Camera Configuration Manual

Restore default settings 66

Import/export a configuration file 67

Upgrade firmware 67

Reboot camera 67

System service 68

About 68

Camera operation 69

Logging on and off 69

Live view mode 69

Playing back recorded video 69

Snapshots 71

Searching event logs 72

Index 78

TruVision IP PTZ Camera Configuration Manual 3

Introduction

This is the configuration manual for the following TruVision IP PTZ camera models:

TVP-5104 (2.0 MPX wall mount, 25X, H.265)

TVP-5105 (2.0 MPX wall mount, 36X, 200m IR, H.265)

Contact information and

manuals/tools/firmware

For contact information and to download the latest manuals, tools, and firmware, go to

the web site of your region.

Americas: www.interlogix.com

EMEA: www.firesecurityproducts.com

Manuals are available in several languages.

Australia/New Zealand: www.utcfs.com.au

4 TruVision IP PTZ Camera Configuration Manual

Network connection

This manual explains how to configure the camera over the network with a web

browser.

TruVision IP PTZ cameras can be configured and controlled using Microsoft Internet

Explorer (IE) and other browsers. The procedures described use Microsoft Internet

Explorer (IE) web browser.

Checking your web browser security level

When using the web browser interface, you can install ActiveX controls to connect and

view video using Internet Explorer. However, you cannot download data, such as video

and images due to the increased security measure. Consequently you should check the

security level of your PC so that you are able to interact with the cameras over the web

and, if necessary, modify the Active X settings.

Configuring IE ActiveX controls

You should confirm the ActiveX settings of your web browser.

To change the web browser’s security level:

1. In Internet Explorer, click Internet Options on the Tools menu.

2. On the Security tab, click the zone to which you want to assign a web site under

“Select a web content zone to specify its security settings”.

3. Click Custom Level.

4. Change the ActiveX controls and plug-ins options that are signed or marked as

safe to Enable. Change the ActiveX controls and plug-ins options that are

unsigned to Prompt or Disable. Click OK.

- Or -

TruVision IP PTZ Camera Configuration Manual 5

Under Reset Custom Settings, click the security level for the whole zone in the

Reset To box, and select Medium. Click Reset.

Then click OK to return to the “Internet Options Security” tab window.

5. Click Apply in the Internet Options Security tab window.

Windows users

Internet Explorer for Windows operating systems have increased security measures to

protect your PC from any malicious software being installed.

To have complete functionality of the web browser interface with Windows, do the

following:

• Run the Browser interface as an administrator in your workstation

• Add the camera’s IP address to your browser’s list of trusted sites

To add the camera’s IP address to Internet Explorer’s list of trusted sites:

1. Open Internet Explorer.

2. Click Tools, and then Internet Options.

3. Click the Security tab, and then select the Trusted sites icon.

4. Click the Sites button.

5. Clear the “Require server verification (https:) for all sites in this zone box.

6. Enter the IP address in the “Add this website to the zone” field.

7. Click Add, and then click Close.

8. Click OK in the Internet Options dialog window.

9. Connect to the camera for full browser functionality.

Activating the camera

When you first start up the camera, the Activation window appears. You must define a

high-security admin password before you can access the camera. There is no default

password provided.

6 TruVision IP PTZ Camera Configuration Manual

You can activate a password via a web browser and via TruVision Device Manager

(included on the CD to find the IP address of the camera).

Activation via the web browser:

1. Power on the camera and connect the camera to the network.

2. Input the IP address into the address bar of the web browser, and click Enter to

enter the activation interface

Note:

The default IP address of the camera is 192.168.1.70.

For the camera to enable DHCP by default, you must activate the camera via

TruVision Device Manager. Please refer to the following section, “Activation via

TruVision Device Manager”.

10.Enter the password in the password field.

Note: A valid password range must be between 8 and 16 characters. You can use a

combination of numbers, lower and upper case letters, and special characters : _ - , .

* & @ / $ ? Space. The password must contain characters from at least two of these

groups. We also recommend that you reset your password regularly. For high

security systems, it is particularly recommended to reset the password monthly or

weekly for better protection.

4. Confirm the password

5. Click OK to save the password and enter the live view interface.

Activation via the web browser:

1. Run TruVision Device Manager to search for online devices.

2. Check the device status from the device list, and select the inactive device.

TruVision IP PTZ Camera Configuration Manual 7

3. Enter the password in the password field, and confirm it.

Note: A valid password range must be between 8 and 16 characters. You can use a

combination of numbers, lower and upper case letters, and special characters : _ - , .

* & @ / $ ? Space. The password must contain characters from at least two of these

groups. We also recommend that you reset your password regularly. For high

security systems, it is particularly recommended to reset the password monthly or

weekly for better protection.

4. Click OK to save the password.

A pop-up window appears to confirm activation. If activation fails, confirm that the

password meets the requirements and try again.

5. Change the device IP address to the same subnet with your computer by either

modifying the IP address manually or selecting the Enable DHCP check box.

6. Input the password and click the Save button to activate your IP address

modification.

8 TruVision IP PTZ Camera Configuration Manual

Overview of the camera web browser

The camera web browser lets you view, record, and play back recorded videos on the

optional SD card as well as manage the camera from any PC with Internet access. The

browser’s easy-to-use controls give you quick access to all camera functions. See

Figure 1 below.

If there is more than one camera connected over the network, open a separate web

browser window for each individual camera.

Figure 1: Web browser interface

Table 1: Overview of the web browser interface

Name

Description

1. Live view Click to view live video.

2. Playback Click to play back video.

3. Picture Click to search for evet pictures and continues pictures

4. Log Click to search for event logs. There are three main types:

Alarm, Exception, and Operation.

5. Configuration Click to display the configuration window for setting up the

camera.

6. Viewer View live video. Time, date and camera name are displayed

here.

7. Current user Displays current user logged on.

8. Logout Click to log out from the system. This can be done at any time.

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Interlogix Caméra de sécurité

Interlogix

Interlogix UVD-XP4DNR(-P) Manuel utilisateur

Interlogix

Interlogix TruVision TVC-7120-1-N Manuel utilisateur

Interlogix

Interlogix UltraView PTZ Manuel utilisateur

Interlogix

Interlogix TruVision Open Standards Manuel utilisateur

Interlogix

Interlogix TruVision TVB-2403 Feuille d'instructions

Interlogix

Interlogix TVD-6120VE-2-N Manuel utilisateur

Interlogix

Interlogix UVD-XP4DNR(-P) Manuel utilisateur

Interlogix

Interlogix TruVision TVB-4410 Manuel

Interlogix

Interlogix UltraView PTZ Manuel utilisateur

Interlogix

Interlogix TruVision IP Dome Manuel utilisateur

Interlogix

Interlogix TruVision TVB-2401 Manuel utilisateur

Interlogix

Interlogix TruVision TVB-5702 Feuille d'instructions

Interlogix

Interlogix True Vision TVP-5104 Manuel utilisateur

Interlogix

Interlogix TruVision 4 Series Manuel utilisateur

Interlogix

Interlogix 4 SERIES Feuille d'instructions

Interlogix

Interlogix TruVision Line Manuel utilisateur

Interlogix

Interlogix TVB-WBS Manuel utilisateur

Interlogix

Interlogix TruVision TVD-2401 Manuel utilisateur

Interlogix

Interlogix FW5.1 Manuel utilisateur

Interlogix

Interlogix TruVision TVD-2402 Manuel utilisateur

Interlogix

Interlogix TruVision Line Feuille d'instructions

Interlogix

Interlogix UVC-XP4DN-HR Manuel utilisateur

Interlogix

Interlogix UltraView IP PTZ 36X Manuel utilisateur

Interlogix

Interlogix TruVision TVT-2101 Manuel utilisateur

Manuels Caméra de sécurité populaires d'autres marques

Okina USA

Okina USA SIR36-870VF650LP Manuel utilisateur

Divio

Divio NDR155PA Manuel utilisateur

Canon

Canon VB-C500D Manuel utilisateur

Easy Access

Easy Access EasyGuard Manuel utilisateur

Vivotek

Vivotek FD9389-EHV-v2 Manuel utilisateur

TUYA

TUYA COSMO W2 Manuel utilisateur

Eusso

Eusso UNC7500-IR Guide de configuration

urmet domus

urmet domus 1096/204 Manuel utilisateur

VC VC20 series Manuel utilisateur

Axis

Axis Q1614 Manuel utilisateur

ieGeek

ieGeek DD201 Manuel utilisateur

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Manuel utilisateur

Vicon

Vicon V662-D-1 Mode d'emploi

Grundig

Grundig GCH-K0274P Manuel utilisateur

Lorex

Lorex VANTAGE LBC7032 Manuel utilisateur

4xem

4xem WPT Manuel utilisateur

Samsung

Samsung SCV-3082 Manuel utilisateur

Vitek

Vitek VTC-C544 Manuel utilisateur