Interconnective Partner MK4 Manuel utilisateur
USER MANUAL
Power On
There are two ways to turn on the camera.
1.) Hold the Power Button for 3 seconds. It will turn on into standby mode.
2.) Hold the Power Button for 3 seconds. It will turn on and start recording.
Recording
Depending on what defaults you have set through the camera manager, you
can start recording either by pressing the Record Button once or by double
pressing it. The Partner MK4 must be in standby mode to do this. To turn off
recording, hold the Record Button until you hear an audible beep or the LED
goes from Red to Green.
Snapshot
To take a snapshot, simply press the Photo Button which is the smaller button
next to the record button on the front of the camera.
Record
Button
Photo Button /
Stealth Mode
Power
Button
Quick Use Guide
For technical support, please call 01494 446 965
®
Stealth Mode
Activating Stealth mode will disable the LEDs on the top of the camera as well
as the audio alarm for discreet recording and photos. You can do this by holding
the Photo Button for 3 seconds. To deactivate Stealth Mode, hold the same
button for another 3 seconds.
Powering Off
To turn off your Partner MK4 from standby, just hold the power button for 3
seconds. You should see all of the LEDs shutdown to show that the camera is
powered-down and not in standby modeanymore.
Quick Use Guide
For technical support, please call 01494 446 965
®
Essential Components
The Partner MK4 Body Worn Camera is a full professional video recording
system that consists of several elements.
The body camera itself is the primary component, with the solo-dock, Camera
Manager, DEMS Software and attachments all there to help you get the most
from it.
The body camera will record video and take photos. The Camera Manager
software is used to manage your preferred settings on the camera as well as
unlock the internal storage to access the files. The crocodile clip and KlickFast
attachment allow you to mount your device on your uniform or wherever
convenient.
The solo-dock is used to download footage and to charge your Partner MK4
Body Camera.
The Digital Evidence Management Software (DEMS) is an optional extra that
allows you to manage your footage complete with Audit Log and automatic de-
encryption.
You will also need a PC or Laptop with a decent amount of storage to hold your
footage. We recommend 1TB but how much you will require depends on how
long you need to hold footage, how often you record and what resolution and
encoding settings you choose. The Partner MK4 Camera Manager is compatible
with Windows XP, VISTA, 7, 8 & 10.
Initial Setup
For technical support, please call 01494 446 965
®
Getting Started
Take your Partner MK4, Solo-Dock and USB cable out of the box. Plug the USB
cable into a PC or Laptop and the smaller end into the back of the dock. Now
insert your body camera into the solo-dock. You can also plug the camera
directly into the computer using the provided USB.
Using your included software USB, find the Camera Manager Installer and run it.
Installing new software will require admin permissions so it may be worth
contacting your I.T. team before hand.
Initial Set Up
For technical support, please call 01494 446 965
The Partner MK4 Camera Manager
®
Logging In
Run your newly installed Partner MK4 Camera Manager and you will be greet
with a login screen. Select Administratorand enter the administratorpassword.
For your default password, please consult your Interconnective issued
version of this manual.
We strongly recommend that once you login that you change the password right
away. Please ensure that you keep the password safe as if you lose it, you will
be required to send the camera back to us for unlocking.
If you are using the DEMS software, it is better to restrict access to Camera
Manager to authorised personal only as all general functions such as
downloadingfootagecane be done throughthere.
For technical support, please call 01494 446 965
Table des matières
Autres manuels Interconnective Appareil photo numérique
