Interconnective H Eye Manuel utilisateur

USER MANUAL

Catalogue

Speciﬁcation

Diagram

Charge

Quickstart

PC Software

FAQ

RECORDING

Video Resolution Multiple Recording Resolution 1296P(30 FPS)/

1080P(30 FPS)/ 720P(30 FPS)/ 480P(30 FPS)

Video Format .MP4 / H.264

Recording Angle Wide Angle 140 degrees

Audio High Quality Built-in Microphone.

Pre Record Support

Water Mark User ID, Time and date Stamp Embedded into Video.

Frame 4FPS, 6FPS, 8FPS, 12FPS, 16FPS, 25FPS, 30FPS

Video Duration 10 mins, 15 mins, 20 mins

Activation prompt Vibrator & Speaker & LED Indicators

PHOTOGRAPH

Camera 34M 14M 12M 8M

Camera Format JPEG

Snap Shot Capture Photos During Video Recording

Type Built-in 2400mAH Lithium (LiCoO2)

Charging Time 180 minutes

Battery Life 8 hours at 1080P@30

OTHERS

Storage Capacity 16G/32G/64G/128G

IR Light 6PCS 850nm Infrared LED with Wide Angle

Auto IR Control Support

Night Vision Up to 10 Meters

Waterproof IP66

Password Protection Requires Password to Access to Video

Dimensions 76 mm *54 mm *26.5mm

109 gram

Working Temperature -20C° ~ 65C°

Storage temperature -20C° ~ 65C°

ACCESSORIES

Standard Accessories

SOS LED Blue and Red Flash Light

White LED Support

Catalogue

Specifications

Weight

1.Charging Indicator

2.Power Indicator

3.Infrared LED x 6

4.Red SOS LED

5.White LED

6.Blue SOS LED

7.Auto IR Detector

8.Microphone

9.Speaker

10.Reset Button

11.LCD Screen

12.Left

14.Right

15.USB

16.Fn Button

17.Power Button

18.Video Button

19.Audio/ SOS Button

20.Photo/ Back Button

21.Charging/Data Pin

13.Conﬁrm/ Menu/ Playback

Functions

Item

No.

4&6

*10

*13

*20

Charging

LED

Power

LED

IR LED

SOS LED

White LED

Microphone

Reset Button

LCD Screen

Left Button

Right Button

Confirm/Menu

Playback

Fn Button

Video Button

Photo Button

During charging, this indicator is in blue. After finish, the blue

light will be off.

Green - Standby Mode

Red Video Recording

Orange - Audio Recording

In the night vision, IR LED helps to get a clear videos without

colour. Short press Fn button to activate.

Long press Audio/SOS button to activate the SOS LED. Blue

and Red LED will flash in rotation.

Long press Fn button to activate the white LED

Microphone is waterproof, but make sure to clean the dust and

water when necessary

After press, the camera will be turn off. (It won’t clear the data

and settings)

2.0 TFT LCD Screens helps to video preview and playback.

During working status press Power button to turn if off.

During standby mode, press left to zoom in. During playback,

press left to rewind. In other situations, it is for up and left.

Under preview mode, short press to enter menu, or long press

to enter playback page. In other situations, this button is pressed

to enter.

Under preview mode or video recording, short press to turn on

IR LED, or long press to turn on white LED.

Short press to start video recording, or long press to record a

important video.

Under preview mode or video recording, press to take a photo.

In other situations, this button is pressed to return.

During standby mode, press right to zoom out. During playback,

press left to fast forward. In other situations, it is for down and

right.

Note: Please pay attention to the items with “ * ”.

02 03

Diagram

Charging and Download

Socket

Plug

Download

USB

Socket

Plug

Download

USB

Before connect camera to USB, make sure the power voltage is not more

than 5.5V. Otherwise, it will do harm to battery and burn the camera.

Please use our standard charger and cord.

When charging via dock, the camera can support fast charging. (1.5A).

1920x1080P30FPS 00:00:51

2017/05/04 18:20:50 29.5G

DID:0000000 PID:000000

Start Video

Recording

Start Audio

Recording

Take a

Photo

Current Time (Watermark) and Remaining Memory Capacity

Police ID and Device ID (Watermark)

Current Resolution, Video Recording Time and Battery Life

Hold and press power button for 2 seconds to turn on camera.the unit will

emit ONE audio chirp and long vibration. A green indicator on top of the unit

will turn on and remain green while the unit is powered on.

To record a video, press the “Recording” button. The unit will emit 1 audio

chirps and 1 vibration. A red working indicator on top of the device will turn

on and remain red until recording is ended.

04 05

Charge

Quickstart

Find Cammanager.exe in the CD disc, double click to open it.

Default Password is 000000 (six zero).

After entering password, then click “Login”.

Password Setting < New Password

After login, input new password, then click “Apply” to

Change password

Device Information < Device ID

Device ID is with 7 characters. While Police ID is with 6

characters. After setting, click “Apply” to finish.

How to Login?

How to Change Password?

How to Change ID?

1) Select recording video resolution(from 480P to 1296P),

2) Select from 4FPS to 30 FPS to choose frame rate.

3) Select the length of each video(from 5 to 30 Mins),

4) Select video quality from low to high.

When login the cammanager, tick the checkbox of “Sync

PC Time”.

Other Settings

Password Login

Sync PC Time

√

Connection: Connected Device Name: SC01

CamManager

Camera Setting Device Information WiFi Setting Password Setting Other Settings

Video Resolution: 1920x1080P

Clip Time: 15 minutes

Pre-record: Off

Photo Size: 34M

Video Quality: Super Fine

Frame Rate: 30 FPS

Motion Detect: Off

Post-record: Off

Burst Capture: 1 Pic

Mute: Off

Factory Setting Open Disk

Firmware Version: Nov. 6 2019 15:11:50 Batery: 100% SD Status: 28GB - 29.71GB

1) Anti-Virus function: to prevent other files generated

in camera memory.

2) WiFi and GPS Settings are Optional. These functions

are not available if there are no hardware module.

3) Record Notification: Camera can warn the user by

vibration during recording.

06 07

PC Software

Customer

Information

Name:

Address:

Zip Code:

Tel:

Product

Information

Model Name:

Serial No.:

Purchase Date:

Failure

Detail

Product Warranty Card

Failure Diagnose Solution

No Power

Protection Mode

Charge camera for at least 3 hours.

Press Reset button, and restart camera

USB Cable Change the USB cord

Contact your seller to reset password

Can not

Power On

Connect Camera to PC via USB, and charge it

for 30 mins.

Battery Power

is not enough

① First time or did not use for a long time, please

discharge the battery, then charge it for at least

3 hours before use it.

② Don’t charge the camera when too hot/cold.

Short Working

Time

Data Transfer

is not stable

Power of USB

is not enough to

afford charging

and download

Use other USB port on your laptop.

①

Use the dock station.

②

Computer can

not recognize

the device Forget Password

FAQ

Table des matières

Autres manuels Interconnective Appareil photo numérique

Interconnective

Interconnective Partner MK4 Manuel utilisateur

Manuels Appareil photo numérique populaires d'autres marques

Mercury

Mercury 350K Manuel utilisateur

Pentax

Pentax Optio LS 465 Manuel utilisateur

Sanyo

Sanyo VPC-S1085 Manuel utilisateur

GE SMART A1255 Manuel utilisateur

Point Grey

Point Grey Gazelle Manuel utilisateur

Nikon

Nikon COOLPIX A Manuel utilisateur

Pentax

Pentax P-5 Manuel utilisateur

BlazeVideo

BlazeVideo A280 Manuel utilisateur

Sony

Sony MCA-20 Manuel utilisateur

Sony

Sony Alpha DSLR-A290 Manuel utilisateur

ATIK Cameras

ATIK Cameras One Manuel utilisateur

CohuHD Costar

CohuHD Costar 3930 Series Manuel utilisateur

Leica

Leica M10-R Manuel utilisateur

FujiFilm

FujiFilm FinePix A700 Manuel utilisateur

Lorex

Lorex LNZ81P25 Series Manuel utilisateur

GE J1470S Manuel utilisateur

Sony

Sony A6700 Guide de l'utilisateur

Canon

Canon EOS ELAN7 Manuel utilisateur