Intelligas EGIP Manuel utilisateur

Intelligas takes every care in ensuring these products reach you in perfect working order.

Each system is tested on dispatch and site induced damage is easily detectable.

Ensure the operation of this unit is explained fully to the kitchen staff.

24 hour technical support line - 02381 290444

EGIP GAS PRESSURE PROVING SYSTEM

WITH VENTILATION INTERLOCK

INTELLIGAS

Gas safety & control systems

INSTALLATION

GUIDE

intelligas.co.uk

INSTALLATION

GUIDE

EGIP

INTELLIGAS

Gas safety & control systems

Introduction

Thank you for choosing an Intelligas product. Please follow these instructions to ensure a safe, functional and

long-lasting installation.

This information is important and should be read and understood before attempting installation.

If you are unsure of the terminations and their design voltages or function then refer to this guide or our technical

support line, you can call 02381 290444 or you can text 07952269791 and we’ll get back to you as soon as we’re

available.

Siting the panel

Choose a suitable mounting position for the control unit. Mount the unit away from sources of extreme heat. Ensure the panel is

placed in a position where mechanical damage is unlikely and where it can be easily accessed for use and maintenance.

Fix the panel using the marked enclosure holes only. Take care not to damage the internal wiring or PCB of the unit when drilling.

Under no circumstances should wiring be routed behind the PCB of the control panel.

Control panel supply

All our control panels (except the KVM-SF) should be supplied via a fused spur connection unit. The fuse should be changed to one

that’s rated at 5amps.

KVM-SF ONLY if the panel is supplying the fans directly from the PCB then it should be supplied via a 16amp single phase isolator.

If the panel is controlling Inverters and only the output signals are being used then, as above, the panel should be supplied by a 5amp

fused spur.

intelligas.co.uk

INTELLIGAS

Gas safety & control systems intelligas.co.uk

Field wiring

All wiring from the supply and to the gas valve carries mains voltage (230v ac nominal). The current edition of the IEE Wiring

Regulations should be strictly adhered to, wiring and connections should be made by a suitably qualiﬁed electrician or competent

person.

The ﬁeld wiring voltage to the interlock inputs is reduced to 24 volts, do not connect mains to the air pressure switch terminals,

e-stop, analogue input/output 0-10v control, gas detector or ﬁre alarm terminals.

Please follow the ﬁrst ﬁx wiring schedule set out below:

1) Main supply 2 core + E 1.5mm (as per regulatory requirements)

2) Gas valve 2 core + E 1.5mm (as per regulatory requirements)

3) Pressure switches 2 core + E 1.5mm (YY type cable)

4) Fire alarm interlock (if req) 2 core + E 1.5mm (FP type cable)

5) Emergency stops 2 core + E 1.5mm (YY type cable)

6) Gas detection equipment, If ﬁtted, 3 core screened (CY type cable)

7) Gas pressure switch, if ﬁtted, 2 core + E 1.0mm (YY type cable)

8) 0-10v signal wiring, if ﬁtted, 2 core 1.0mm (CY type cable)

Where multiple supplies enter a control panel, perhaps in a current sensing interlock. It is preferable that each supply is on the

same phase. If this can’t be achieved, then additional warning labels should ﬁxed in a suitable location on the control panel.

The advice given on these instruction pages, speciﬁcally to cable types and ratings may change depending on cable lengths and

installation conditions. If you are not sure about any of the cable types or ratings then contact our technical support team.

INSTALLATION

GUIDE

EGIP

Flow DirectionFlow Direction

On to appliances

or gas taps

Dungs gas pressure

switch set to 15 bar

Installation option 2

Unequal tee joint or centre

reduced down to 1/4” male nipple

to make directly into Dungs

gas pressure switch

To comply with gas regulations manual

isolation points, purge points and test

nipples may be required. This drawing is

for information only and the necessity of

the above items should be checked to

ensure compliance with the current

regulations.

INTELLIGAS

Gas safety & control systems intelligas.co.uk

Installation option 1

Alternatively, the gas pressure switch can

be made into the test point on the gas valve.

Ensure the downstream test point is used!

Intelligas gas proving system mechanical layout

INSTALLATION

GUIDE

EGIP

SEE NEXT PAGE FOR DETAILED INFORMATION

INTELLIGAS

Gas safety & control systems intelligas.co.uk









































































































These switches are designed to enable fast wiring and are not for use

to bypass safety features that are in use.



















Gas pressure switch





Air pressure switch / current sensor





Table des matières

Autres manuels Intelligas Système de contrôle

Intelligas

Intelligas KVM-SF Manuel utilisateur

Intelligas

Intelligas 100 Series Manuel utilisateur

Manuels Système de contrôle populaires d'autres marques

Pentair Pool Products

Pentair Pool Products Compool Manuel utilisateur

ComfortNET

ComfortNET CTK04 Manuel utilisateur

Fireye

Fireye InSight II 95DSS3 Manuel utilisateur

CAME

CAME G3000 Manuel utilisateur

Idemia

Idemia MorphoAccess VP MD Manuel utilisateur

Axis

Axis P1445-LE-3 Manuel utilisateur

HEIDENHAIN

HEIDENHAIN TNC 150 B Manuel utilisateur

CNC-Step

CNC-Step High-Z T-Series Manuel utilisateur

Doosan

Doosan DVF Series Manuel utilisateur

Honeywell

Honeywell KAP 140 Manuel utilisateur

Honeywell

Honeywell vk41 series Manuel utilisateur

AirBench

AirBench FPW Guide d'installation

Cypress

Cypress HHR-3160 Manuel utilisateur

CAME

CAME GLT40AOS Manuel utilisateur

Zonex

Zonex GEN II -VVT Guide de l'utilisateur

Altronics

Altronics K 9650 Manuel utilisateur

micro-trak

micro-trak RoadMaster Manuel utilisateur

micro-trak

micro-trak Calc-An-Acre II Manuel utilisateur