»The access passwords to the product information allow the attainment and alteration of any facility, such as external
access to the company's system to obtain data and make calls, therefore, it is of utmost importance that the passwords are
made available only to those who are authorized to use them, under the risk of misuse.
»The product has security settings that can be enabled, and that will be addressed in this manual, however, it is essential
that the user ensures the security of the network on which the product is installed, since the manufacturer is not responsible
for the invasion of the product through hacker and cracker attacks.
Specifications Values
Dimensions (W x H x D) (73 x 25.2 x 90) mm
Operation Environment
Operation temperature 0°C ~ 45°C
Relative Humidity: 10% ~ 90% (Without condensation)
Storage Environment
Storage temperature: 0 ºC ~ 70 ºC
Relative humidity: 10% ~ 90% (Without condensation)
Power supply
(external)
Input: 100-240 V ~ 50/60 Hz
Output: 12 Vdc ~ 1 A
Maximum Consumption Power
12W
Ethernet/PON Chipset RTL9607C
Wireless Chipset RTL8812FR-CG & RTL8192FR-CG
Flash Memory 128 Mb
SDRAM Memory 128 Mb
Optical interface 1 SC/APC port
TX wavelength: 1310 nm
RX wavelength: 1490 nm
Laser safety warning
The Intelbras WiFiber 1200R has a laser emitting source that emits light energy in optical fiber cables. This energy is
within the infrared (invisible) region of the red (visible) electromagnetic spectrum.
Certain procedures performed during testing require the manipulation of optical fibers without the use of protective caps,
thus increasing the risk of exposure. Exposure to any visible or invisible laser may damage your eyes under certain
conditions.
Caution: Avoid direct exposure to the ends of optical connectors. Laser radiation may be present and could damage your
eyes. Never look directly into an active fiber optic or fiber optic connector of a device that is powered.
4. TECHNICAL SPECIFICATIONS
