Intel P4304BT series Manuel utilisateur

Thank you for buying an Intel® Server Chassis or System. The following information

will help you assemble your Intel®Server Chassis and install components.

If you are not familiar with ESD [Electrostatic Discharge] procedures used during

system integration, see the complete ESD procedures described in your Service Guide.

This guide and other supporting documents are located on the web at:

http://www.intel.com/support.

G23642-001

Intel® Server Chassis P4000S Family

Intel® Server System P4304BT Series

Quick Installation User's Guide

Intel® Server Chassis P4000S Family Product Configuration

= Configuration Feature

4 x 3.5"

Fixed

4 x 3.5"

Hot Swap

Hard Drive

System Fan

Rear Fan

(92x38mm)

365W

Fixed

Power Supply

P4304XXSFCN

P4304XXSHCN

Intel® Server System

Intel® Server Chassis P4000S Family Supported Board and Integrated System

Warning

Read all caution and safety

statements in this document

before performing any of the

instructions. Also see the Intel

Server Board and Server Chassis

Safety Information document at:

http://support.intel.com/support/

motherboards/server/sb/cs-010770

.htm for complete safety information.

Warning

Installation and service of

this product to be performed

only by qualified service

personnel to avoid risk of injury from

electrical shock or energy hazard.

Caution

Observe normal ESD

[Electrostatic Discharge]

procedures during system

integration to avoid possible

damage to server board and/or

other components.

Tools Required

Anti-static

wrist strap

Phillips*

screwdriver

Flat Blade

screwdriver

Intel is a registered trademark of Intel Corporation or its subsidiaries in the United States and other countries. *Other

Integrated Intel® Server System

Intel® Server Chassis Supported Intel® Server Board

P4304XXSFCN

P4304XXSHCN

P4304BTLSFCN

P4304BTSSFCN

P4304BTLSHCN

S1200BTL

S1200BTS

Table of Contents

Fixed Hard Drive Installation ........................................................................................ 7

Hot-Swap Hard Drive Installation .............................................................................. 7

Intel® Server Chassis P4304XXSFCN ...................................................................... 1

Intel® Server Chassis P4304XXSHCN ..................................................................... 1

Intel® Server Board S1200BTL ................................................................................... 8

Intel® Server Board S1200BTS ................................................................................ 10

General Installation Process ........................................................................................................ 2

Hard Drive Installation .................................................................................................................... 7

Intel® Server Board S1200BT series ....................................................................... 5

Processor, Heat Sink, Memory Installation .......................................................................... 5

Servel Board Cabling Connections ........................................................................................... 8

Front Panel Controls and Indicators ..................................................................................... 11

Chassis Overview .............................................................................................................................. 1

Chassis Overview

Chassis Features and Components

365-W Fixed Power Supply

I/O Ports

Alternate Serial Port Knockout

PCI Add-in Board Slot Covers

AC Input Power Connector

92mm Chassis Rear Fan

Alternate RMM4 Knockout

A Kensington* Cable Lock Mounting Hole

Padlock Loop

Alternate RMM4 Knockout

Front Control Panel

5.25" Peripheral Bays

Hard Drive Bays

Chassis Features and Components

365-W Fixed Power Supply

I/O Ports

Alternate Serial Port Knockout

PCI Add-in Board Slot Covers

AC Input Power Connector

92mm Chassis Rear Fan

Alternate RMM4 Knockout

A Kensington* Cable Lock Mounting Hole

Padlock Loop

Alternate RMM4 Knockout

Front Control Panel

5.25" Peripheral Bays

4 x 3.5" Hot-swap HDD Cage

Intel® Server Chassis P4304XXSHCN

Intel® Server Chassis P4304XXSFCN

3Remove the Bezel Assembly

At a 40-degree angle, push the bezel

assembly away from the chassis.

Release the two plastic tabs on the left side

of the bezel assembly to disengage the

tabs, and rotate the bezel assembly no

more than 40 degrees outward.

CAUTION: Do not rotate the bezel

assembly more than 40° or you will

damage the bezel hooks at the

right side of the bezel assembly.

4Install Hard

Drive

See Hard Drive Installation

Section

(Page 7 )

for your

Hard Drive Installation.

5Install Tool-less CD-ROM or DVD-ROM Drive

Attach slides to the DVD or CD-ROM drive by pressing

the slides firmly into the side dimples on the DVD or

CD-ROM drive.

Remove an EMI shield.

Insert the drive/slide assembly into the

device bay until the slides lock into place.

General Installation Process

Remove the Side Cover

Remove the screws.

Note:

A non-skid surface or

a stop behind the

chassis may be

needed to prevent the

chassis from sliding

on your work surface.

Slide the side cover

back and lift the cover

outward to remove it.

The installation instructions in this section are for general components of Intel® Server Chassis

P4000S family, but the illustrations are based on the Intel® Server Chassis P4304XXSFCN.

2Install Server Board

• If the server board is pre-installed, please follow the

instructions in Processor, Heat Sink, Memory

Installation section ( Page 5 ) to install the

Processor(s), Heat Sink(s) and Memory.

Return to this section when finished.

• If the server board is to be installed, please use the

bumpers, standoffs and mounting screws that

came with your chassis, and open the Intel®Server

Board box, then follow the instructions in the enclosed

Intel®Server Board Quick Start User’s Guide for

server board installation and back panel I/O shield

installation.

Return to this section when finished.

General Installation Process

Install PCI Card Assembly ... Continued

From inside of

chassis,press open

the back panel PCI

add-in board

retention device.

6Install PCI Card Assembly

Insert tabs on left side of PCI

Card Guide into slots in

chassis.

Secure the PCI Card Guide

with the screws .

NOTE: Only needed when full

length PCI card is plugged.

A. Install PCI Card Guide B. Install PCI Add-in Boards

ARemove the PCI

slot shield by

pushing the shield

out from inside

the chassis.

CWhile holding the

PCI add-in board by

its top edge or upper

corners, firmly press

the add-in board into

the expansion slot.

DClose the PCI

add-in board

retention device.

7Complete Server Board Cabling

Connections

See your Intel®Server Board Quick Start User's Guide

or Service Guide for server board cable connections.

See Platform Cabling diagram in Server Board Cabling

Connections section ( Page 8-10 ) for your server board

to chassis cable connections.

Return to this section when finished .

8Remove Filler Panels

Remove the bezel filler panels for

each drive you have installed.

Release plastic tabs located at back

side of bezel and pull out filler

panels from front.

General Installation Process

9Install Front Bezel Assembly

Engage three plastic bezel hooks into the raised metal

slots at the chassis edge. Keep the right edge of front

bezel align tightly with the right edge of the Chassis.

Rotate the bezel assembly toward the chassis and latch

the two plastic tabs on the left side of the bezel

assembly to the chassis.

10 Install Side Cover

ASlide the chassis cover on the chassis.

Secure the chassis cover with the screws .

CAUTION: This chassis must be operated with the

SIDE COVERS installed to ensure proper cooling.

11 Finishing Up

2. Connect the AC

power cable last.

1. See your Intel®

Server Board

Quick Start User's

Guide to connect

your keyboard,

mouse, video, and

other I/O cables.

I/O Connections

Power

CAUTION:

power supply

requires a

16-gauge

power cord.

12 Install Software

• BIOS, Drivers, and Operating System Install

A. Conﬁrm BIOS Version:

Look on the Server/System

Management screen in the BIOS Setup Utility to determine the

installed BIOS version.

Compare this to the versions at:

http://www.intel.com/support

If new versions are available, update the BIOS on your server.

See the User Guide on the Intel®Server Deployment Toolkit CD

for update instructions.

B. Conﬁgure your RAID Controller:

Use the instructions

provided with the RAID controller.

C. Install your Operating System:

Use the instructions

provided with the RAID controller and with the operating system.

D. Install Operating System Drivers:

With the

operating system running, insert the Intel®Server Deployment

Toolkit CD. If using a Microsoft* Windows* operating system,

the Express Installer will autorun and allow you to select the

appropriate drivers to install. On other operating systems,

browse the CD folders to locate and install the driver files.

Intel® Server Board S1200BT Series

A. Open the Socket Lever

Push the lever handle down

and away from the socket to

release it.

Rotate the lever all

the way to open.

B. Open the Load Plate

C. Disengage the Cover

Open the

load

plate as

shown.

D. Remove the Cover

E. Unpack the Processor

Save the

protective

cover.

Carefully lift the cover

straight up as shown.

REMOVE

Place thumb and finger as

shown and tilt up slightly at front.

REMOVE

Carefully remove

protective cover

as shown.

Save the

protective

cover.

Install the Processor(s)

Cautions:

When removing the protective

cover, DO NOT TOUCH the

gold socket pins.

When unpacking a processor,

hold by the edges only to avoid

touching the gold contact pins.

To avoid damage, DO NOT

DROP the cover onto the

socket pins or components.

Follow below Instructions for step on

page 2

, then

return to step on page 2 when finish this section.

Processor, Heat Sink, Memory Installation

Install the Processor(s) ... continued

H. Engage the Load Plate

Push down on the locking lever.

I. Latch the Locking Lever

Slide the tip of the lever under the

notch in the load plate. Make sure

the lever is securely latched.

Load Plate

Front Edge

Shoulder

Screw

CAUTION: DO NOT damage the

server board with the tip of the

locking lever.

Make sure the front edge of the load

plate slides under the shoulder screw

as the lever is lowered.

Close the load plate

locking lever.

F. Install the Processor

Processor must align correctly with

the socket opening before installation.

DO NOT DROP processor into socket!

CAUTION: The underside of

the processor has components

that may damage the socket pins if

installed improperly.

Components

Orient the processor with the socket so that the processor

cutouts match the two

socket pins.

Note location

of gold key at

corner of

processor.

Install the Processor(s) ... continued

G. Close the Load Plate

Carefully lower the load plate over the processor.

Processor, Heat Sink, Memory Installation

2b Install Active Heat Sink(s)

Align heat sink with holes

in board and lower assembly

to board. Snaps go through

holes in server board.

Press downward

on top of cap.

Plug the fan cable into the CPU fan header.

Fastener snaps

into final position.

Repeat B-D for each

fastener in the numerical

order shown at left.

Note: Heatsink

styles may vary

TIM

Make sure the screwdriver slot at

the top of each fastener is rotated

perpendicular to the blades of

the heat sink as shown.

Use the following procedure to install an

active heat sink to your server board:

CAUTION: The heat sink has

thermal interface material (TIM)

on the underside of it. Use

caution so that you do not

damage the thermal interface

material. Use gloves to avoid

sharp edges.

2c Install DIMM Memory Modules To Install DIMMs:

DDR3 DIMM Memory Identiﬁcation:

Open both DIMM socket levers.

Note location of alignment notch.

DIMM

notch and

socket

bump must

align as

shown.

Other

Memory

DDR3

This server board supports up to 4 DDR3 1066/1333 ECC UDIMM.

Non-ECC memory is NOT supported by this server board.

CAUTION: Observe normal ESD (ElectroStatic Discharge) procedures

to avoid possible damage to system components.

Insert DIMM making sure the connector edge of the DIMM aligns correctly with the slot.

Push down firmly on the DIMM until it snaps into place and both levers close.

IMPORTANT! Visually check that each latch is fully closed and correctly engaged with

each DIMM edge slot.

CAUTION: Avoid touching contacts when handling or installing DIMMs.

Install DIMM Memory Modules ... Continued

Memory Conﬁgurations and Population Order:

Note: For additional memory configurations, see

the Techinical Product Specification on the Intel®

Server Deployment Toolkit CD that accompanied

your Intel®Server Board S1200BT, or go to:

http://www.intel.com/support/motherboards/server.

Memory sizing and configuration is supported

only for qualified DIMMs approved by Intel®. For

a list of supported memory, see the tested memory

list at

http://serverconfigurator.intel.com/default.aspx.

DIMM A2

DIMM A1

DIMM B2

DIMM B1

Memory Type: Minimum of one 1 GB, DDR3

1066/1333 MHz ECC UDIMM.

DIMM A2

DIMM A1

DIMM B2

DIMM B1

Intel ®Server Board S1200BTL Shown Intel ®Server Board S1200BTS Shown

NOTE: Return to step on page 2 when finish this section.

Table des matières

Autres manuels Intel Serveur

Intel

Intel SPSH4 - Server Platform - 0 MB RAM Manuel utilisateur

Intel

Intel M20NTP1UR Guide de configuration rapide

Intel

Intel TIGI2U - Carrier Grade Server Manuel utilisateur

Intel

Intel S2600WF Series Guide de configuration

Intel

Intel NSW1U - IP Network Server Guide de référence

Intel

Intel SC5650BCDP Guide de configuration

Intel

Intel ISP1100 - Server Platform - 0 MB RAM Manuel utilisateur

Intel

Intel R2000WF series Manuel utilisateur

Intel

Intel SR1530CL - Server System - 0 MB RAM Manuel utilisateur

Intel

Intel SR1530HSH - Server System - 0 MB RAM Manuel utilisateur

Intel

Intel SR9000MK4U - Server System - 0 MB RAM Guide de l'utilisateur

Intel

Intel SRPM8 Manuel utilisateur

Intel

Intel SC5400RA - Server System - 0 MB RAM Manuel utilisateur

Intel

Intel SR1500 - AXXMINIDIMM DDR-2 RAID Controller Cache... Manuel utilisateur

Intel

Intel R1304BTSSFAN Manuel utilisateur

Intel

Intel ISP2150 - Server Platform - 0 MB RAM Manuel utilisateur

Intel

Intel SR1630BC - Server System - 0 MB RAM Guide de configuration

Intel

Intel R1000EP series Manuel utilisateur

Intel

Intel SC5650-DP Manuel utilisateur

Intel

Intel SC450NX - Server Platform - 0 MB RAM Manuel utilisateur

Intel

Intel SR6850HW4M Manuel utilisateur

Intel

Intel SR1530CL - Server System - 0 MB RAM Manuel utilisateur

Intel

Intel H2000G Series Manuel utilisateur

Intel

Intel S7000FC4UR - Server System - 0 MB RAM Manuel utilisateur

Manuels Serveur populaires d'autres marques

HP AlphaServer ES47 Manuel utilisateur

Dell

Dell PowerEdge R410 Manuel utilisateur

PowerNAS

PowerNAS CMA Manuel utilisateur

Supero

Supero FatTwin F617R3-FT Manuel utilisateur

MSI

MSI P1-109N-L70 Manuel utilisateur

Dell

Dell PowerEdge XE9640 Manuel

Dell

Dell PS4100 Instructions de montage

EtroVISION

EtroVISION EV3151 Manuel utilisateur

NEC

NEC Express5800/T110j Manuel utilisateur

HP ProLiant Gen9 Manuel utilisateur

Compaq

Compaq ProLiant 3000 Manuel

Dell

Dell PowerEdge 3YPMN Manuel utilisateur

iRobo

iRobo IPC2U Manuel utilisateur

Nortel

Nortel 1000 Con?guration guide Manuel utilisateur

Asus

Asus AP7500 Manuel d'utilisation et d'entretien

Avid Technology

Avid Technology AirSpeed 5000 Manuel utilisateur

HP Integrity rx2600 Guide d'installation

Milestone

Milestone Husky IVO 350T Manuel utilisateur